2010 FORD FUSION HYBRID Complaints

2020 Ford Escape wipers keep stuttering, moving very slowly, freezing midway through cycle, or fail to operate during adverse weather conditions. This results in poor to no visibility sometimes with the wiper blocking vision directly. This is a known recall and Ford has refused to repair the wiper until the unveil their solution for all potentially impacted vehicles. They acknowledge that a wiper motor would repair our vehicle right now but told us to wait for months while they determine a global fix. Recall number we believe is 26S14. Both Ford America and local dealer will not perform work. Communications were via phone call with both dealer and Ford America.

The power steering has failed twice recently while driving and the dashboard warning displayed as follows: power steering assist fault. This makes it very hard to steer, dangerous and scary when this happens. Can a recall be issued for my vehicle? I am very disappointed that my 2010 ford fusion hybrid vehicle was left out of the recall even though it was manufactured at the same plant as the 2011 - 2013 models that were recalled. I found this online: Investigation and Recall ContextFederal Probes: The NHTSA investigated 2010–2012 Ford Fusion and Lincoln MKZ models for sudden loss of electric power steering, logging thousands of complaints.Exclusion of the 2010 Model: Ford issued recalls (such as campaign 15S18) for 2011–2013 models to update power steering control modules or fix motor sensor faults, leaving 2010 models uncovered by the official action.Closure: The NHTSA officially closed its investigation into the 2010 Fusion steering complaints after concluding the failure trend did not warrant a mandatory safety recall, noting drivers could still revert to manual steering.

SUBJECT: Fraudulent Recall Completion / Incomplete Remedy resulting in Component Failure (Recall 19S54 / NHTSA 19V904) I am writing to file an emergency safety complaint regarding a fraudulently cleared safety recall on my 2010 Ford Fusion Hybrid. According to Ford's internal OASIS database, Safety Recall 19S54 (NHTSA Campaign 19V904) was marked as "completed" under a previous owner. However, physical inspection of the vehicle proves that the mandatory federal remedy was never executed. The master cylinder still retains the original factory DOT 3 cap, and the system was never upgraded to DOT 4 fluid. Because the servicing dealership falsified the repair documentation and left the corrosive DOT 3 fluid in the system, my vehicle has now suffered the exact catastrophic safety failure the recall was meant to prevent. The ABS Hydraulic Control Unit (HCU) internal valves have seized. The brake pedal is heavily compromised, and the vehicle is an active, severe safety hazard to drive. I am the second owner of this vehicle. I unknowingly purchased a car with a fraudulently cleared safety defect. Because this failure is a direct result of an incomplete federal safety recall remedy, I demand that Ford Corporate reopen this VIN file under "Related Damage / Incomplete Remedy." I require Ford to: 1. Arrange a complimentary tow to a certified Ford dealership. 2. Replace the ruined ABS/HCU module entirely free of charge. 3. Perform the mandatory DOT 4 pressure flush and install the correct reservoir cap. 4. Provide a complimentary rental car while this safety hazard is being resolved. I have taken photographic and video evidence of the DOT 3 cap and the failed braking system to support my legal claims. Fairway Ford of Yorba Claimed it had already been done when clearly it hasn't and pushed it off like nothing.

There have been many recalls on the 2010 Ford Fusion Hybrid, according to Ford mine has already had the repairs done yet the issues I’ve been having all match recalls. I’ve had issues with my passenger seat, the air bag system light is always on and the seat controls no longer work. The clockspring system is pure trash, there is no reason I’ve had to replace it twice now in the 2 months I’ve had this car. My ABS system keeps going in and out and says service advancetrac system. My hybrid battery rarely goes into hybrid anymore causing my mpg to drop. There were a few other things but that’s what’s coming out mind now.

The contact owns a 2010 Ford Fusion Hybrid. The contact stated that upon coming to a complete stop, the brake pedal suddenly depressed all the way to the floorboard. The contact became aware that the brakes were no longer functioning properly. The vehicle returned to normal functionality, but the failure became a regular occurrence. The ABS and traction control warning lights were illuminated. The vehicle was not taken to the dealer or an independent mechanic. The vehicle was not repaired. After investigating the failure, the contact related the failure to NHTSA Campaign Number: 19V904000 (Service Brakes, Hydraulic). The manufacturer was notified of the failure, and a case was opened. The failure mileage was 100,000.

The contact owns a 2010 Ford Fusion Hybrid. The contact stated while reversing into a parking space at 2 MPH, the vehicle lost power steering functionality, and the steering wheel became significantly difficult to turn. The contact could not recall whether a warning light was illuminated. The contact was able to park the vehicle. The vehicle was taken to Tire Kingdom, where it was diagnosed. The mechanic determined that the failure was related to Ford Campaign Number: 15S18. The dealer was contacted and informed the contact that the VIN was not included in the campaign. The vehicle was not repaired. The manufacturer was notified of the failure and a case was filed. The failure mileage was approximately 150,000.

The contact owns a 2010 Ford Fusion Hybrid. The contact stated that while driving 15 MPH and depressing the brake pedal, the brake pedal went to the floorboard. The contact stated that the brake system, ABS, and traction control warning lights were illuminated. Additionally, the message "Brake System Failure" was displayed. The contact drove with caution to the residence, and then had the vehicle towed to an independent mechanic to be diagnosed. The contact was informed that further diagnostic testing was needed to determine the cause of the failure. The vehicle was not repaired. The contact referenced NHTSA Campaign Number: 19V904000 (SERVICE BRAKES, HYDRAULIC) as a possible cause for the failure. The manufacturer was notified of the failure. The approximate failure mileage was 162,000.

The contact owns a 2010 Ford Fusion Hybrid. The contact stated that while driving at an undisclosed speed, the message "ABS fault Detected" was displayed, prompting the contact to discontinue driving the vehicle. The ABS warning light was illuminated. The vehicle was towed to an independent mechanic, who diagnosed a failure with the ABS Hydraulic Control Unit (HCU). The vehicle was not repaired. After investigating the failure, the contact related the failure to NHTSA Campaign Number: 19V904000 (Service Brakes, Hydraulic), but the VIN was not included. The manufacturer was not notified of the failure. The failure mileage was 42,000. See DP26004 for potential Defect Petition DP26004

The contact owns a 2010 Ford Fusion Hybrid. The contact stated while driving at an undisclosed speed, the air bags warning light illuminated. The vehicle was taken to the dealer; however, the vehicle was not diagnosed. The contact was informed that it would take three days to receive the diagnostic results. The vehicle was not yet diagnosed or repaired by an independent mechanic or the dealer. The manufacturer was made aware of the failure. The failure mileage was approximately 109,000.

The contact owns a 2010 Ford Fusion Hybrid. The contact stated while driving at approximately 20 MPH, the "Check Brake System" message was displayed on the instrument panel and the brakes failed to engage while the brake pedal was depressed. The contact stated that upon depressing the brake pedal to the floorboard, the vehicle responded as needed. The ABS and traction control warning lights were illuminated. The vehicle was taken back to the residence. The vehicle was not diagnosed or repaired. The manufacturer was notified of the failure. The failure mileage was approximately 160,000.