2023 FORD MUSTANG MACH E Complaints

Driving approaching a corner and suddenly the vehicle showed on screen "Stop Safely Now" coasting to a stop. Only 180 miles on car. 78 percent charge. 230 miles to empty. Once in Park couldn't move out of park. Ford towing service indicated 3 hours out. Stuck on corner in traffic at intersection in my mind a dangerous situation.

During rapid deceleration from ~35mph to <5mph the contents of the frunk (front trunk) shifted and was able to strike the emergency release button within the frunk causing the hood to open while the vehicle was in motion. At the time the button was pressed various alarms showed on the screen to alert the driver to pull over which could not be done safely based on the current road conditions. The design of the emergency release button is deficient in preventing inadvertent opening of the frunk while the vehicle is in motion. The vehicle has been inspected by the dealer and they have indicated that all systems are working as intended.

The contact owns a 2023 Ford Mustang Mach-E. The contact stated that the vehicle failed to start. The contact stated that after five minutes of attempting to start the vehicle, the vehicle started. The contact then stated that a message displayed on the instrument panel “High Voltage Battery warning and to Contact Roadside Assistance” and “Powertrain Malfunction - Reduced Power”. The contact stated that the vehicle decelerated and failed to accelerate while the accelerator pedal was depressed. Limited Power was displayed on the instrument panel. The vehicle was taken to the dealer where the cause of the failure could not be determined. The vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 1,317.

The car came to an abrupt stop and wouldn’t start up again. This happened three times. First time, I was at a charging station. Second time it happened in middle of the road while driving. It Put the safety of my family and me at danger. I had to call 911 to help manage busy traffic around me and towing service to take the car to dealership/service. The ford service center told me car was fixed - they had the car for 10 days before returning it to me. Two weeks and ~200 miles later the same thing happened yet again. My wife and child were stranded in middle of traffic. I am just thankful they were able to avoid collisions with other vehicles. The car has been back in the ship for another 24days and counting. Online forums indicate that my issue is not isolated. Ford has yet to comment or address my issue directly. Imagine the car coming to a full stop in the middle of a busy interstate highway!!

The HVBJB subassembly in ALL Ford Mach-e vehicles has known defects with 'under-designed' main contactors that are known to fail under normal charging and driving conditions as outlined in current open Ford recall notice for my vehicle 22s41. Unfortunately, the internal damage to contactors is not visible externally, and warning notices on display only after damage has occurred, and can result in sudden loss of propulsion power at highway speed, loss of power steering, and power brakes... and failure of other 12v systems due to failure to charge the 12v battery properly after contactors are damaged. Less catastrophic results can include failure to start; which can 'strand' driver's and passengers in remote areas, bad weather conditions, as well as cause loss of use for weeks due to delays in replacement parts and local Dealerships needing equipment and training to effect removal/replacement of faulty unit with a new HVBJB having re-designed 'beefier' components.? ? My complaint is that Ford's recall notice 22s41 is a software-only attempt to prevent future damage, and does not require removal of the part(s) which are KNOWN TO FAIL to be replaced with the re-designed components which are available, and have been used to repair failures under warranty. I have no way of inspecting the original equipment to evaluate current condition; and failure can result in sudden and unexpected loss of power, steering, and braking as well as potentially 'stranding me' in unsafe conditions unable to re-start my vehicle.? Even though I have a MY 2023 Mach-E, it is known that the HVBJB is failing in '23s, and additional failures in earlier MYs that have had the HVBJB replaced with the newer part. ? I would like to see NHTSA strengthen the Ford recall to include both improved software AND removal/replacement of the HVBJB sub-assembly with the new 'beefier' parts, even the latest revision of the part is still failing at an unacceptable rate.

Vehicle suddenly lost power with a warning on the dashboard (service vehicle soon). The component ended up being a high voltage battery junction box (HVBJB) which was replaced by the dealer under warranty. This is a known issue reported on widely on forums such as macheforum.com

2 days after ownership the vehicle shutdown and went into limp mode with a picture of a turtle and battery icon in middle of road with traffic, apple valley ford replaced the 12v battery and that solved the issue, today 3 days later same issue! Stuck in the road, ev battery charged to 90%

I took car a month ago and it stops between the road..saying STOP SAFELY NOW and than i am unable to move my car, it happened thrice, last time it stopped on the road and cop had to call roadside assistance so i contacted my dealer on 10 Aug about this issue, they diagnose the problem and re run test some test and recycled the system, now again today on 14 August, it got stopped in middle of traffic and the crash was about to happen, i was lucky that my life got saved or else it would be a major accident, so i went again to my dealer and explained everything now they are again gonna re run those test, but it's becoming a life threatening issue for me to drive this car, so please i need help for it. Dealer address - 6100 W 95th St, Oak lawn, IL, 60453

Purchased New on 7/4/23. Failure #1 7/14/23 - Pre Collision Assist Failure fault, Air bag electrical issue air system may not function, Powertrain Malfunction Fault, Restraints control module not configured. Failure #2 8/4/23 - Pre Collision Assist Failure fault, Air bag electrical issue air system may not function, Powertrain Malfunction Fault, Restraints control module not configured. Failure #3 8/8/23 - Pre Collision Assist Failure fault, Air bag electrical issue air system may not function, Powertrain Malfunction Fault, Restraints control module not configured. Failure #4 - Pre Collision Assist Failure fault, Air bag electrical issue air system may not function, Powertrain Malfunction Fault, Restraints control module not configured. All 4 occasions the service lights illuminated on the dash and power to the vehicle was reduced significantly. Took to the Dealer (David Wilson Villa Ford, Orange CA) on 8/9/23 - They indicated they could not replicate and there was no repair to make. Contacted Ford and they were unresponsive.

When the car was started, the center console screen froze. During that time, the backup camera did not display when the car is in reverse. It has happened several times. It's a safety issue when the backup camera does not work.