2021 FORD MUSTANG MACH E Complaints

The contact owns a 2021 Ford Mustang Mach-E. The contact stated that the vehicle failed to start. The contact stated that “Stop Safely Now" and "Accessory Power Active" messages were displayed. The contact exited the vehicle and upon attempting to unlock the doors, the doors failed to unlock. The contact was unable to unlock the vehicle for several hours and remained stranded on the side of the road while awaiting assistance from Roadside Assistance. The vehicle was towed to the dealer where the battery was replaced and an unknown software update was completed; however, the failure recurred. The contact later received notification of NHTSA Campaign Number: 22V412000 (Electrical System) however, the part to do the recall repair was not yet available. Airport Marina Ford (5880 W Centinela Ave, Los Angeles, CA 90045) was also contacted. The vehicle was not repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the failure. The failure mileage was approximately 6,000. Parts distribution disconnect.

The HVBJB subassembly in ALL Ford Mach-e vehicles has known defects with 'under-designed' main contactors that known to fail under normal charging and driving conditions as outlined in current open Ford recall notice for my vehicle 22s41. Any internal damage to contactors is not externally visibley, and warning notices on display only after damage has occurred, and can result in sudden loss of propulsion power at highway speed, loss of power steering, power brakes and failure of other 12v systems due to failure to charge the 12v battery properly after contactors are damaged. Less catastrophic results can include failure to start; which can 'strand' driver's and passengers in remote areas, bad weather conditions, as well as cause loss of use for weeks due to delays in replacement parts and local Dealerships NEED equipment and training to effect removal/replacement of faulty unit with a new HVBJB having re-designed 'beefier' components.? ? My complaint is that Ford's recall notice 22s41 is a software-only band aid and does not require removal of the parts KNOWN TO FAIL. These parts should be replaced with the re-designed components which are available, and have been used to repair failures under warranty. I have no way of inspecting the original equipment to evaluate current condition; and failure can result in sudden and unexpected loss of power, steering, and braking as well as potentially 'stranding me' in unsafe conditions unable to re-start my vehicle.? I suffered a failure related to this post-recall and had a sudden and permanent loss of power while driving at Texas highway speeds (70mph) in congested morning traffic. Fortunately I was able to make my way off the highway but other conditions could have ended up worse. ? Software "fixes" are not the solution and the actual problem of the defective parts need to be replaced in the affected models to avoid possible injuries and fatalities from these vehicles.

We saw the recall warning and attempted to fix the issue but dealer stated it's been fixed over the air update. However, on July 21, there was a high voltage battery failure notice.

The HVBJB subassembly in ALL Ford Mach-e vehicles has known defects with 'under-designed' main contactors that are known to fail under normal charging and driving conditions as outlined in current open Ford recall notice for my vehicle 22s41. Unfortunately, the internal damage to contactors is not visible externally, and warning notices on display only after damage has occurred, and can result in sudden loss of propulsion power at highway speed, loss of power steering, and power brakes... and failure of other 12v systems due to failure to charge the 12v battery properly after contactors are damaged. Less catastrophic results can include failure to start; which can 'strand' driver's and passengers in remote areas, bad weather conditions, as well as cause loss of use for weeks due to delays in replacement parts and local Dealerships needing equipment and training to effect removal/replacement of faulty unit with a new HVBJB having re-designed more robust components that conform to higher electrical standards. ? My complaint is that Ford's recall notice 22s41 is a software-only attempt to prevent future damage, and does not require removal of the part(s) which are KNOWN TO FAIL to be replaced with the re-designed components which are available, and have been used to repair failures under warranty. I have no way of inspecting the original equipment to evaluate current condition; and failure can result in sudden and unexpected loss of power, steering, and braking as well as potentially 'stranding me' in unsafe conditions unable to re-start my vehicle.? ? I would like to see NHTSA strengthen the Ford recall to include both improved software AND removal/replacement of the HVBJB sub-assembly with the new more robust parts.?

The HVBJB subassembly in ALL Ford Mach-e vehicles has known defects with 'under-designed' main contactors that are known to fail under normal charging and driving conditions as outlined in current open Ford recall notice for my vehicle 22s41 NHTSA Campaign Number: 22V412000. Unfortunately, the internal damage to contactors is not visible externally, and warning notices on display only after damage has occurred, and can result in sudden loss of propulsion power at highway speed, loss of power steering, and power brakes... and failure of other 12v systems due to failure to charge the 12v battery properly after contactors are damaged. Less catastrophic results can include failure to start; which can 'strand' driver's and passengers in remote areas, bad weather conditions, as well as cause loss of use for weeks due to delays in replacement parts and local Dealerships needing equipment and training to effect removal/replacement of faulty unit with a new HVBJB having re-designed 'beefier' components.? ? My complaint is that Ford's recall notice 22s41 ( NHTSA Campaign Number: 22V412000) is a software-only attempt to prevent future damage, and does not require removal of the part(s) which are KNOWN TO FAIL to be replaced with the re-designed components which are available, and have been used to repair failures under warranty. I have no way of inspecting the original equipment to evaluate current condition; and failure can result in sudden and unexpected loss of power, steering, and braking as well as potentially 'stranding me' in unsafe conditions unable to re-start my vehicle.? ? I would like to see NHTSA strengthen the Ford recall to include both improved software AND removal/replacement of the HVBJB sub-assembly with the new 'beefier' parts.

The side mirrors in my vehicle are motorized and set to automatically fold in when I lock the car after getting out. They rarely do this (not the issue, and they’re fine mechanically). When I get back in and start the vehicle they are supposed to automatically unfold. 1/3 to 1/2 the time they do not. More than once I have started driving in a parking lot to realize I have no side view mirrors. I have to stop and press the “fold/unfold” button to make them open. With the mirrors closed I am unable to see out them to check blind spots or look for pedestrians or other cars. I have learned to be very careful to check if the mirrors failed to unfold because of this. I have asked my dealer to look at this at least twice (most recently Monday). They can never reproduce it, both auto-fold and unfold work for them perfectly from what they say. That’s quite different from my experience. There are no errors or messages anywhere about this. My car has the most recent software (except possibly 22S41), none of the major or minor updates it has received have ever made a difference.

The HVBJB subassembly in ALL Ford Mach-e vehicles has known defects with 'under-designed' main contactors that are known to fail under normal charging and driving conditions as outlined in current open Ford recall notice for my vehicle 22s41. Unfortunately, the internal damage to contactors is not visible externally, and warning notices on display only after damage has occurred, and can result in sudden loss of propulsion power at highway speed, loss of power steering, and power brakes... and failure of other 12v systems due to failure to charge the 12v battery properly after contactors are damaged. Less catastrophic results can include failure to start; which can 'strand' driver's and passengers in remote areas, bad weather conditions, as well as cause loss of use for weeks due to delays in replacement parts and local Dealerships needing equipment and training to effect removal/replacement of faulty unit with a new HVBJB having re-designed 'beefier' components.? ? My complaint is that Ford's recall notice 22s41 is a software-only attempt to prevent future damage, and does not require removal of the part(s) which are KNOWN TO FAIL to be replaced with the re-designed components which are available, and have been used to repair failures under warranty. I have no way of inspecting the original equipment to evaluate current condition; and failure can result in sudden and unexpected loss of power, steering, and braking as well as potentially 'stranding me' in unsafe conditions unable to re-start my vehicle.? ? I would like to see NHTSA strengthen the Ford recall to include both improved software AND removal/replacement of the HVBJB sub-assembly with the new 'beefier' parts.

Ford Dealers are refusing to complete recalls 21V712 and 21V711. To quote an e-mail from O'Meara Ford in the Denver metro area that summarizes my conversations with every other dealership, "I’ve been informed that we will no longer complete the glass recalls on MACH E vehicles. Long story short Ford does not reimburse us enough money to cover these Recalls with our labor and sublet invoices, this may be why other Ford dealers are refusing to do the recalls." Ford is not guaranteeing reimbursement for the new roofs and windshields that all the dealerships need to order before doing the work because there is over a 50% chance they will break upon removal. Ford tells me they can do absolutely nothing (customer service case no. CAS-37570083-G3K5V9) and I told them they could pay more and they said they can't. Meanwhile NHTSA is also doing nothing as this is my second complaint in 2-3 months with nothing being done. I've now had four cancelled appointments from three different dealerships in the Denver Metro area.

The HVBJB subassembly in ALL Ford Mach-e vehicles has known defects with 'under-designed' main contactors that are known to fail under normal charging and driving conditions as outlined in current open Ford recall notice for my vehicle 22s41. Unfortunately, the internal damage to contactors is not visible externally, and warning notices on display only after damage has occurred, and can result in sudden loss of propulsion power at highway speed, loss of power steering, and power brakes... and failure of other 12v systems due to failure to charge the 12v battery properly after contactors are damaged. Less catastrophic results can include failure to start; which can 'strand' driver's and passengers in remote areas, bad weather conditions, as well as cause loss of use for weeks due to delays in replacement parts and local Dealerships needing equipment and training to effect removal/replacement of faulty unit with a new HVBJB having re-designed 'beefier' components. My complaint is that Ford's recall notice 22s41 is a software-only attempt to prevent future damage, and does not require removal of the part(s) which are KNOWN TO FAIL to be replaced with the re-designed components which are available, and have been used to repair failures under warranty. I have no way of inspecting the original equipment to evaluate current condition; and failure can result in sudden and unexpected loss of power, steering, and braking as well as potentially 'stranding me' in unsafe conditions unable to re-start my vehicle. I have no confidence taking this car far from home with my family until a real fix is instituted. I would like to see NHTSA strengthen the Ford recall to include both improved software AND removal/replacement of the HVBJB sub-assembly with the new 'beefier' parts.

When placed in drive the car takes off on its own without the acceleration pedal being touched. The passenger locks only work with key fob unlock button being pressed and the passenger side doesn't recognize the Fob for easy entry. The adaptive cruise control warning comes on constantly. The handas free parking never worked since i got the car in July 2021.