2021 FORD MUSTANG MACH E Complaints

What component or system failed or malfunctioned, and is it available for inspection upon request? Front Camera Fault; pre-collision assist; Adaptive cruise control not available How was your safety or the safety of others put at risk? I can get into a car accident and injure myself or others Has the problem been reproduced or confirmed by a dealer or independent service center? Yes Has the vehicle or component been inspected by the manufacturer, police, insurance representatives or others? unknown - this is a well known issue multiple owners reporting on message boards and Ford has not done a recall Were there any warning lamps, messages or other symptoms of the problem prior to the failure, and when did they first appear? Yes warning light came on and functions don't work

The backup camera has failed numerous times. The camera will work and then suddenly stop creating a safety risk of hitting a pedestrian walking behind the vehicle when relying on the camera. The dealer has attempted to fix the problem by installing a new camera, new wiring harness, and a new module. The new module installed, under warranty, in February 2024 now requires a software update that only the dealer can perform at a cost of $1200. The vehicle warranty expired in July and Ford is not covering the cost of the update despite the module being new and requiring the update to work properly. It seems that if a part on a vehicle requires a software update to function properly that the part was defective and should be recalled. The dealer has inspected and advises to update the software on the module to regain proper function of the backup camera.

The contact owns a 2021 Ford Mustang Mach-E. The contact stated while driving 60 MPH, the messages "Power Train Malfunction - Reduced Power", "High Voltage Battery Warning", and another message to “Stop the vehicle as soon as possible because the vehicle may shut down without further warning” were displayed. The contact was able to pull to the side of the road. The contact was able to restart the vehicle and continued driving at 35 MPH. The vehicle was taken to the dealer but was not yet diagnosed or repaired. The contact related the failure to NHTSA Campaign Number: 23V687000 (Electrical System); however, the VIN was not included. The manufacturer was notified of the failure. The failure mileage was approximately 41,000.

The vehicle suddenly had a front windshield camera error light up on my dashboard from just driving regularly on the road. I currently have a crack windshield which I am having difficulty to replace because the front camera sensor error codes wouldn't allow the windshield camera to be recalibrated. My vehicle is currently experiencing this exact service bulletin but since is is not a recall, my dealership charged me to diagnosis this issue for $300 and claimed to fix this issue but is currently not solved. Occasionally the front camera being faulty lights up and disappears, however I am still unable to replace my windshield due to this error. [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

Car reports Camera Fault; forward-facing camera no longer working and adaptive cruise control, lane keeping, emergency braking and collision avoidance systems are all no longer available.

It accelerated unexpectedly with no input while decelerating in one pedal drive mode. Cruise control was not in use at all during the drive.

Our vehicle would flash a "Front Camera fault service required" and a "Collision Warning not available" every now and then that started a few months ago. I had it diagnosed by the dealer and they said it would cost me $786.50 to do a major update on IPC, IPMA, PSCM, CCM, CMR, and perform IPMA Alignment per TSB 23-2040. We have to pay this because we are out of warranty. We thought all system upgrades are supposed to be free. Wouldn't this be a flaw on the Mach-e and should be considered a standard safety issue that needs to be corrected at no cost to the car owner? I saw that many owners also have the same issue. Our family including a [XXX] may be at risk because of this. Appreciate your help on this. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

Front Camera Fault & Pre-Collision Assist Not Available Errors COLLISION WARN MALFUNCTION, COLLISION WARN NOT AVAILABLE or COLLISION WARN DISPLAY FAULT. Over 30k miles in the car so the warranty is over for bumper to bumper coverage. Dealer said an update would fix the issue. It cost 2k. Paid. The error came back within a day. Dealer says the next option is to replace all the wiring for the cameras. Which would be another 2-3k.

For over a year I got this warning that said pre collision assist not available. And it would go away after a few minutes. A few weeks ago it never left. Now I have that error as well as adaptive cruise not available. I cannot use my cruise control. I just recently had another issue and paid over 3 thousand. Now ford wants to give me another quote for 3 thousand. I searched and I'm not the only one with issue. This should he a recall problem as we are all having same issue.

Mach e standard edition shows multiple signs of a failing High Voltage Battery Junction Box (HVBJB). The vehicle was bought certified pre owned with only 12k miles on the vehicle. At 16k miles (2 months of ownership) the vehicle showed a high voltage battery warning and power train malfunction warning. Three warning lights were displayed on the dash which were: a yellow turtle, wrench, and car with exclamation. Vehicle was taken to service department where they ran updates and said the issue was a one pedal drive error and ran a standard osp for a power train update (not related to this power train issue). They made no mention of the battery and power train issue on the service record. 1-2 weeks later and about 1k miles, the same issue repeated. The vehicle was taken to a different dealership where they indicated the car had a over heating charge coupler and unbalanced battery "A". Both of these show a probable issue with the HVBJB. The dealership has been insistent that they can't do anything without a stored code. Prior OSP's updated the car to limit power when contactors in the HVBJB exceeded .5 ohms and would show all the warnings we have seen. The main 12 volt battery was replaced at 1k miles, which Ford did not realize the failure could have been from the HVBJB, as it receives charge from the primary batteries. The dealership and Ford engineers have requested that we drive the vehicle until the safety lights repeat, knowing that this puts us in danger of a larger malfunction that could result in complete loss of power while driving. They say that they cannot work on an issue unless a code is tripped. I suspect a code will not trip as the first two times nothing was stored and the OSP patch that NHSTS requested helps prevent the complete failure. The code will only be stored in a complete failure event, which could lead to an accident. There are current recalls for this HVBJB, however it is only for the higher end models. Out of space :) Thanks