2019 FORD RANGER Complaints

The ten-speed transmission "10R80" has Rough and harsh shifting, "upshifts and downshifts," which sometimes causes the vehicle to lunge forward unexpectedly. The dealer has reprogrammed the transmission twice with no change.

At 68k miles and one month past the 5 year warranty, the CDF drum broke off causing metal to fly loose in the transmission/ creating etchings in the transmission. The entire transmission needed to be replaced because of loss of pressure in the transmission. The vehicle was attempting to shift into first and second gear driving at 80mph.

The contact owns a 2019 Ford Ranger. The contact stated that while driving at various speeds, the vehicle jerked forward while slightly depressing the accelerator pedal. There was no warning light illuminated. In addition, the transmission was shifting hard while shifting from first through third gear. The vehicle was taken to an independent mechanic to be diagnosed; however, the contact was informed that no fault codes were retrieved. The manufacturer was notified of the failure and the contact was referred to a local dealer for assistance. The vehicle was not repaired. The failure mileage was approximately 100,000.

Once the "Maintenace Required" message is displayed on the "multi-information display" (shortly prior to standard maintenance intervals), it is permanently displayed . Once the message is displayed, "meter control switches" no longer function (until reset by dealer maintenance). Enabling any ADAS feature (if not enabled) is impossible as this requires using the "meter control switches." While stopped (or not), resetting the "message indicating maintenance" procedure in the user manual does not work (page 447 in [XXX] ) as it requires functional "meter control switches": ¦Resetting the message indicating maintenance is required After the required maintenance is performed according to the maintenance schedule, please reset the reminder light or message. To reset the reminder light or message, follow the procedure described below: 1 Press or of the meter control switches and select on the multi-information display. 2 Press or of the meter control switches and select “Vehicle Settings”. Then press and hold . 3 Press or of the meter control switches and select “Scheduled Maintenance”. Then press . 4 Select “Yes” and press . INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

The 10R80 10 speed transmission in my truck has failed, due to the steel to aluminum drum being different materials it cause pre mature catastrophic failure. the damaged components resulted in needing a full overhaul/rebuild of my transmission at my full expense. my ford dealer stated there is a known tech service bulletin about this exact failure which means ford knows there's a problem but will not fix it. the resulting damage was the sun gear has failed, the drum has failed, and there are chunks missing from gears 5,6 and 7, which also resulted in needing a new valve body, and new torque converter. i opted to take my ranger to a independent shop as i no longer trusted ford to rebuild the transmission correctly and i do also have the failed components. The safety issues were losing all drive train function randomly when in operation, on several occasions this happened on the freeway at freeway speeds, or sitting in stop and go traffic and the the truck would just rev but not go anywhere, both scenarios have happened with my kids in the vehicle putting there lives in danger. Yes the problem has been confirmed by both the ford dealer and the independent transmission shop. yes i brought the parts to the ford dealer to look at, but they do remain in my possession. no, there were lights or indicators that a failure was happening, ive done all the ford recommended maintenance at the time it was due, the hard shift had always been there but i was told that's just how it was on multiple occasions. this is a known issue and i have spoken with several other 2019-2023 ford ranger owners and majority have had the exact same issues occur.

When turning on to another road and accelerating, engine will suddenly loose all power. releasing accelerator will regain some power until vehicle speed increases. Throttle control is often erratic and transmission shifting is inconsistent resulting in hard clunks during shift. Pulling into traffic with a sudden loss of power leaves me vulnerable to a collision.

In my 2019 Ford Ranger, which has 75,570 miles, on [XXX], I was at a stop sign on [XXX] , at [XXX] , near Statesboro, GA, waiting for a break in traffic to safely cross. When a safe break occurred, I proceeded to cross, and at about the halfway point of crossing, the transmission bucked, and the truck began to slow to a halt. As a tractor trailer was bearing down on me broadside, the transmission jumped into gear, and I was able to proceed, and narrowly avoided a broadside collision. Afterward, the warning lamp indicated a powertrain malfunction (wrench) light. I took the truck to my local Autozone, where I used their OBD, and the test result fault was "Power Train System, P07F7-00, Gear 10 Incorrect Ratio". I have an appointment at Metter Ford to repair the issue on January 17th, 2025. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

The contact owns a 2019 Ford Ranger. The contact stated that while driving at an undisclosed speed, the vehicle independently accelerated. The contact turned off the vehicle for the vehicle to stop. The vehicle was taken to the dealer to be diagnosed, and the contact was informed that the transmission needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure but offered no assistance. The failure mileage was 65,000.

Truck has noticeable hard shifts into reverse and drive. Sometimes searching for gear while accelerating.

The contact owns a 2019 Ford Ranger. The contact stated while his wife was driving from a complete stop and releasing the accelerator pedal, the vehicle continued to accelerate unintendedly until the brake pedal was depressed. The contact stated the vehicle experienced hard shifts from first gear to third gear. The contact stated that the transmission was slipping while driving in the higher gears. Additionally, the contact stated while attempting to drive from a complete stop on a hill, the vehicle rolled backwards upon depressing the accelerator pedal, nearly causing a crash. The driver turned off and restarted the vehicle, and shifted into drive(D), and the vehicle responded as needed. There was no warning light illuminated. The vehicle was taken to the dealer, where the transmission fluid was replaced; however, the failure got progressively worse. The vehicle was taken back to the dealer, where it was diagnosed and determined that the transmission had failed and needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure and a case was filed; however, no further assistance was provided. The failure mileage was approximately 85,000.