FOREST RIVER Complaints

Castle Rock ST 235/80R16 on the drivers side rear axle tire. I had just exited the interstate when the tire violently exploded. Debris from the side of the trailer and parts of the tire scattered across the opposing lane of traffic. Fortunately, no one was coming. This failure was harmful enough but would have been catastrophic for someone had this occurred on the busy interstate. Tire examined, belts had separated under the tread, leading to the failure. Examination of the remaining three tires, all Castle Rock, revealed one had underlying belt separation and was close to exploding and another had unusual wear indicating a separation was occurring. I have read multiple accounts of these tire exploding. The was no inspection by anyone. There was no warning at all. This explosion did approximately $1000 damage to my trailer. I know this because I have ordered repair parts. The trailer tires have 10589 miles on them, (my truck keeps the mileage.). Trailer with these tires installed was purchased in December 2019. Tire pressure monitored constantly and they were covered when not in use. DOT date code: 0619.

Microwave turned on by itself with no one in the vehicle. Got very hot, smell of melting plastic.

The contact owns a 2020 Forest River Sabre equipped with Castle Rock Tires, Tire Line: Low range E, Tire Size: ST235/80/R16, DOT Number: JUMR2MT. The contact stated that while utilizing the adaptive cruise control and driving 72 MPH, the front passenger’s side forward tire inadvertently delaminated. The contact was able to veer the vehicle off the road and replace the tire with the spare. Neither the dealer nor the manufacturer was notified of the failure. The failure mileage was approximately 2,500.

Subject Castle Rock Radial ST 205/75/R14 tire was running 10 degrees F. hotter (around 110 F) than the three sibling tires after about 30 minutes of travel. This had been the case for an earlier trip of approximately 275 interstate miles. All of these tires are original equipment and similarly used and maintained. The tire eventually exploded (see uploaded pics). Subsequent inspection shows a bubble had formed between layers of the tread portion of the tire. The failed tire is available for inspection. Tire pressure before traveling in the morning was 65 p.s.i. (this is consistently maintained when in use). The load/speed ratings of these tires are D105/101L or 2039 lbs/75 m.p.h. Our running speed is typically 65 m.p.h. or less. The trailer weighs approximately 5600 pounds as loaded. Likely due to a combination of this safety margin in both weight and speed along with a weight distributing hitch with a stabilizer bar, we did not lose control of the vehicle when the tire failed. We were able to pull onto the emergency apron of the interstate immediately and replace the failed tire with a spare tire (not the original spare). The original matching spare with zero miles of use on the road suffered a similar fate (bubble/tire layer separation) in 2022 (NHTSA Reference No. 11490675). The failed tire was taken to a nearby tire center where it was inspected and replaced with a new tire. Subsequent to this trip, the remaining three (3) OEM Castle Rock tires have been replaced due to their high failure rate (40% to date for us).

We bought this towable (5th wheel) RV in January 2021, new from Funtown RV in Denton, TX. Since the day we took deleivery, we have experienced a severe lack of braking ability from the RV brakes. We have had them services multiple times, and ultimately, the final RVIA certified repair facilities conclude that the trailer is just too heavy for the brakes they manufactured it with. They sell thousands of these trailers and they are a sincere danger to the motoring public if they have no ability to brake themselves. If the trailer became disconnected fromt he tow vehicle, the trailer brakes would serve little or no purpose in slowing the trailer. I would suggest that Lippert and Forest River be looked at for this potential dangerous product.

Trailer tire installed by manufacturer was defective. Tire was on the trailer when bought new. Tire had less than 1000 miles and 2 years use. Tire suffered a rupture/blowout while parked in driveway. Trailer had been sitting stationary for two weeks. Proper tire pressure was checked and maintained prior to and after each tow. Castle Rock ST Radial ST226 ST205/75R15 DOT JUJT 1MT Manufactured 4020

There is an active recall on this vehicle: NHTSA: 22V556, Canadian: 2022-368 22V556, 2022-368 - LCI AWNINGS 20E-055 It was inspected and I was told there is nothing wrong with it, now a month later it is failing and no one wants to help me! I have uploaded pictures of the failing awning! How do these companies get away with this? If it is a known defect why are they not forced to replace the defective item BEFORE it fails? This situation is absurd and needs to be better handled and the manufacturer forced to replace known defective items!

First trip with trailer, 200 mile trip, stopped for gas and tire sidewall blowout sounding like a gunshot. Trailer not overloaded, cool day 60 degrees. So glad it did not happen while on the freeway as the tire blow out and lost all air would have been hard to control trailer. Goodyear Endurance Tire size ST205/7515d

The contact owns a 2021 Forest River Cherokee. The contact stated while attempting to enter the camper, it was difficult to open the front and rear doors. After a visual examination, the contact discovered that the doors were splitting at the base. The dealer was notified of the failure and advised the contact to submit a claim to the manufacturer. The vehicle has not been repaired. The manufacturer was notified and advised the contact that the doors were out of warranty, requiring the contact to purchase out-of-pocket to replace the doors. The failure mileage was unknown.

My coach was purchased brand new, straight off the lot, 11/14/2020. On Mon, May 22, 2023, I came home to my black tank hanging out of the bottom of my camper. Upon inspection, the black tank had none of the straps underneath it and was not being held in place by the bracket because the bracket had been welded in backwards. Its amazing that this has not fallen completely out while it was traveling down the road. I have been shuffled between the manufacturer, the dealer, my warranty people. I have sent several pictures and I need to know someone else I can speak with. Even if I was to get a new tank, that bracket will have to be cut off, turned around, and then welded back in place. This is not a “my camper is too old and my warranty has expired” problem. This is a “It was made in your factory by someone that didn’t pay attention to what they were doing” manufacturer problem. This could have caused a serious accident and could be a liability if it could even be moved to the dealer for them to look at it. At this time, it is not operational because it is a liability. This has been escalated to the National Highway Traffic Safety Administration and the Federal Trade Commission.