2021 GMC SIERRA 1500 Complaints

I own a 2021 GMC Denali with a 6.2L V8 L87 engine and 45,500 miles. I have confirmed the presence of metal shavings in the oil and oil filter, indicating that the engine is beginning to fail. When I took the vehicle to my local dealership, I was informed that there is currently no fix for this issue and was advised to continue driving the vehicle. This poses a serious safety risk—not just to me and my family but also to others on the road. A sudden loss of power could lead to a dangerous accident, and I do not want to be responsible for something preventable that could harm innocent people. My concern is that GM is aware of this engine issue but has instructed me to keep driving the vehicle, despite the known defect. How can GM be allowed to avoid accountability for such a critical safety matter? If a fatal accident were to occur, would the responsibility fall on GM or the NHTSA for failing to act? It’s also troubling that GM continues to profit by selling new vehicles, including the 2025 models, with similar issues, all while neglecting to provide solutions for affected customers like me. I purchased this $80,000 truck in good faith, but now no dealer wants to trade or buy these trucks without me taking a significant financial loss—something GM should be responsible for. As a taxpayer, I find it unacceptable that we bailed out GM in the mid-2000s, yet they continue to disregard accountability for their actions. I urge the NHTSA to take this issue seriously. A specific deadline should be set for GM to resolve this issue, and they should face daily penalties for every day they fail to provide a fix. If no resolution is possible, full refunds should be mandated. Please address this issue promptly, as it affects real people’s safety and financial well-being every day.

The plastic frame of the rear sliding window failed. This has allowed water to enter the cabin, which can cause mold and other health issues. This seems to be a common issue with these trucks. My truck has a certified preowned warranty and GMC said they would only cover part of it. They charged me $400 as a deductible, which there should be no deductible per certified preowned warranty. I feel like GMC needs to put out an official recall.

The contact owns a 2021 GMC Sierra 1500. The contact stated that while driving at an undisclosed speed, the vehicle stalled, lost motive power, with smoke came from the engine compartment. There was no warning light illuminated. The vehicle was towed to the residence. The contact attempted to start the vehicle and noticed a knocking sound coming from the engine with the check engine warning light illuminated. The contact received notification of NHTSA Campaign Number: 25V274000 (Engine and Engine Cooling). The dealer was contacted and informed the contact that parts were not yet available. The dealer informed the contact that the vehicle had a Salvage Title and would not be repaired under the recall. The manufacturer was made aware of the failure, and a case was opened. The failure mileage was approximately 48,000. VIN tool confirms parts not available.

The coolant control valve (Part # 24001355) has failed. Apparently this is the case with many vehicles and GM will not/can not get replacement parts. This should be a recall.

AT AROUND 60,000 MILES I HAD EXPERIENCED SHUTTERING AND JERKING IN LOW GEARS AND THE VEHICLE SHOOTS FORWARD WHEN COMING TO A COMPLETE STOP. I WAS ABLE TO TAKE THE VEHICLE IN A SHORT TIME AFTER AND I WAS TOLD BY THE DEALERSHIP THAT IT NEEDED A TRANSMISSION FLUSH. I COMPLETED THE FLUSH AND AFTER A WEEK OR TWO IT STARTED DOING IT AGAIN. I TOOK IT TO A TRANSMISSION SHOP AND THEY ADVISED IT IS THE TRANSMISSION VALVE BODY THAT IS BAD. I BELIEVE THIS STARTED HAPPENING BEFORE MY WARRANTY WAS OUT BUT DUE TO ME BRINGING IT IN AFTER THE MILEAGE THEY WOULD NOT HONOR THE WARRANTY. THIS COULD CAUSE MULTIPLE HAZARDS AT STOPS AND WHILE DRIVING. NO WARNING LAMPS OR MESSAGE HAVE EVER APPEARED.

The check engine light came on at one point. I took it to figure out why the check engine light was coming on and the scanner indicated that the NOX catalyst was below threshold. I researched it and it is a common issue. The check engine light eventually turned off after a couple of days. About 2 weeks later it came back on. I noticed as i was driving the coolant fans were running at 100% meaning that they were blowing long and hard. So I scanned it and it said that the engine coolant valve was at fault. This is also a common issue with the vehicle, particularly in the 2021 GMC Sierra 1500 3.0 Turbo Diesel. It is a faulty part and it costs thousands of dollars to replace. How can these two issues not be on a national recall by GM? They are too common and very expensive to repair. This issue is so common that now the valve is on a national back order. Meaning the parts may not be available for 30-120 days. The vehicle is not safe to drive with a bad engine coolant valve. I have now a rental car for the past 7 days while my truck sits waiting for a valve to arrive and pay thousands in repair just to drive it again.

When I started my truck in the morning I noticed the check engine light came on and my engine fan started running really loudly. I shut my truck off and let it sit for 5 minutes and restarted it in hopes the check engine light would not appear. Unfortunately it did come back on and the engine fan began running really loudly again. I drove the truck to the nearest mechanic and you could feel the truck was trying to counter the problem by forcing me to drive it in a lower speed. After taking it to a shop to get it scanned to see what the code was. The mechanic said it was reading code P1006 three times. He said this coolant system and is why my engine fan was triggered to run really loudly. But the engine was not over heating as all other indicators showed that temps were normal. The mechanic believes it could possibly just be a faulty wire. However after talking to GM he said if it is this coolant part that needs to be replaced, it could take up to months to fix as the part is on national backorder. Doing more research, it appears others have had this same problem and GM even knew shortly after this model was released that this would happen.

wn a 2021 GMC Sierra 1500 6.2L (VIN: [XXX] ), which is now experiencing a severe misfire, engine ticking, and diagnostic code P318A. I’ve confirmed this issue is related to GM Recall N252494001 for engine connecting rod/crankshaft failure. However, I’ve been told my VIN has not yet been activated for recall repairs, and both the local dealership and GMC support have refused to escalate my case or offer assistance. This is a known safety issue, and I’m now at risk of total engine failure and significant financial loss while waiting for GM to act. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

My 2021 GMC Sierra 1500 with L87 engine, covered by recall 25V274. None of my local dealers are inspecting for this recall. This truck is my daily driver and I routinely drive on interstates for my work. GM has been slow to address this major manufacturing defect and has not remedied the problem. My truck is no longer worth what is was previously and is lowering trade in or sale value. I am requesting that GM buy back my vehicle due to ongoing safety risks and loss of value.

The contact owns a 2021 GMC Sierra 1500. The contact received notification of NHTSA Campaign Number: 25V274000 (ENGINE AND ENGINE COOLING); however, the part to do the recall repair was not yet available. The contact stated that while the vehicle was stopped, the vehicle idled intermittently. In addition, an abnormal sound was coming from the left side of the engine. The vehicle was not diagnosed or repaired. The local dealer was not contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The failure mileage was unknown. VIN tool confirms parts not available.