2001 GMC SIERRA 1500 Complaints

BRAKE LINES UNDER DRIVER'S SIDE DOOR BURST, SPILLING FLUID IN DRIVEWAY WHILE PARKING TRUCK. UPON INSPECTION, ALL BRAKE LINES HAVE RUSTED/ROTTED. TRUCK IS SITTING IN DRIVEWAY, UNDRIVEABLE. THANK GOD IT HAPPENED IN DRIVEWAY, NOT ON HILLS WE LIVE ON. USED E-BRAKE TO STOP. *TR

I AM WRITING TO COMPLAIN ABOUT A 2001 GMC SIERRA. IT HAS A SAFETY RECALL FOR THE WHEEL SPEED SENSOR WHICH CAN ALSO DAMAGE THE HUB ASSEMBLY, BUT THE DEALERSHIP STILL WANTS TO CHARGE A WHOPPING $550 REPLACEMENT FEE. THEY SAY THEY CAN NOT REPLACE THE WHEEL SPEED SENSOR WITHOUT REPLACING THE HUB ASSEMBLY EVEN THOUGH IT HAS BEEN RECALLED. THE BAD SPEED SENSOR IS CAUSING THE ABS TO MALFUNCTION AT LOW SPEEDS AND IT IS ALSO SMELLING LIKE ELECTRICAL FIRE, THE PROBLEM HAPPENS EVERY TIME WE DRIVE HE TRUCK AND I AM WORRIED THAT IT WILL SOON CATCH FIRE. WE WERE TOLD ONE DAY THAT THE PROBLEM WAS THE WHEEL SPEED SENSOR, AND THE VERY NEXT DAY, AFTER INFORMING THE DEALER THAT IT WAS UNDER A SAFETY RECALL, THEY TOLD US WE HAD TO REPLACE THE ENTIRE HUB ASSEMBLY. I HAVE NO DOUBT THAT THE ENTIRE HUB BEARING IS BAD, BUT I BELIEVE IT PROBABLY WENT BAD AS A RESULT OF THE MALFUNCTIONING WHEEL SENSOR. NEEDLESS TO SAY, I AM DISAPPOINTED IN MY DEALER AND GMC. *TR

SIXTY MILES INTO RETURN TRIP HOME WHILE BRAKING FOR STOP LIGHT FROM ABOUT 55-60 MPH, BRAKE PEDAL WENT STRAIGHT TO THE FLOOR AND TRUCK WOULD NOT STOP. BRAKES WORKED FINE EARLIER AND FAILED WITHOUT WARNING. LUCKILY I APPLIED THE BRAKES EARLY MISSING A VEHICLE THAT WAS ALREADY STOPPED FOR THE LIGHT BY LESS THAN ONE FOOT. BRAKE FLUID IS LEAKING FROM SEVERELY CORRODED BRAKE LINES UNDERNEATH THE DRIVER'S SIDE DOOR. ALL BRAKE LINES ARE BADLY CORRODED AND ALL NEED REPLACING. ALL OF THE TRUCK'S METAL BRAKE LINES ARE RECOMMENDED TO BE REPLACED. *TR

SAFETY ABOUT GMC SIERRA TRUCK ABS BRAKING SYSTEM. THERE IS A RECALL ON THIS TRUCK FOR ABS ACTIVATION WHEN STOPPING AND COULD CAUSE A CRASH. I EXPERIENCED THIS AND THEY DID REPLACE OR CLEAN THE WHEEL SENSOR AND TEST FOR PROPER OPERATION. NOW I HAVE THE SAME PROBLEM BUT THEY WILL NOT CORRECT IT. THIS IS NOT ACCEPTABLE TO ME FOR I WILL BE TOWING A TRAILER AND DEPEND ON MY BRAKES TO STOP. THEY WANT ME TO TAKE IT TO THE DEALER AT MY EXPENSE. I TOLD THEM THAT I DISCONNECTED THE SENSOR AND THE BRAKES WORK FINE. I BELIEVE THAT THEY CORRECT THIS AND ALSO I DID HAVE A BRAKE LINE FAILURE WHERE I HAD TO PAY THEM $700.00 FOR THE REPLACEMENT OF MY BRAKE LINES. I AM FURIOUS ABOUT THE BRAKING SYSTEM AND CHEAP BUILDING OF OUR CARS AND TRUCKS. DO INVESTIGATE THIS AND REPLY. *TR

TL*THE CONTACT OWNS A 2001 GMC SIERRA C1500. WHILE DRIVING AT SPEEDS OF 3 MPH AND ATTEMPTING A U-TURN, THE BRAKES LOCKED. HE ATTEMPTED TO APPLY THE BRAKES BUT THEY WOULD NT ENGAGE AS HE PROCEEDED TO CRASH INTO A NEARBY TREE. HE WAS NOT INJURED AND THE VEHICLE SUSTAINED SUBSTANTIAL FRONT END DAMAGE. THE CRASH WAS REPORTED TO HIS INSURANCE COMPANY. THE VEHICLE WAS NOT REPAIRED. THE FAILURE MILEAGE WAS 117,323 AND THE CURRENT MILEAGE WAS 117,357.

TL*THE CONTACT OWNS A 2001 GMC SIERRA 1500. WHILE DRIVING AT APPROXIMATELY 20 MPH, THE CONTACT APPLIED THE BRAKES BUT THE VEHICLE DID NOT SLOW DOWN. THE VEHICLE WAS TAKEN TO AN AUTHORIZED DEALERSHIP WHERE THE ENTIRE BREAKING UNIT WAS REPLACED. THE FAILURE HAD NOT OCCURRED SINCE THE REPAIR. THE FAILURE MILEAGE WAS 95,722. THE CURRENT MILEAGE WAS APPROXIMATELY 96,320

CORRODED BRAKE LINE ON MY 2001 GMC PICK UP TRUCK. THE REPAIR SHOP SAID THEY HAVE SEEN ALOT OF THIS. I JUST READ IN THE BOSTON HERALD ABOUT THIS PROBLEM. I WAS GOING DOWN A HILL AND THE BRAKE PEDDLE WENT ALL THE WAY TO THE FLOOR AND THE TRUCK DID NOT STOP. THIS REPAIR WAS $350.00. *TR

DO NOT KNOW IF IT WAS THE FRONT OR REAR BRAKES THAT WERE LOST WHEN DRIVING. DROVE CAREFULLY TO DEALERSHIP AND HAD A CORRODED BRAKE LINE REPLACED THAT HAD A HOLE OR HOLES IN IT. *TR

I OWN A 2001 GMC SIERRA 1500 PICKUP TRUCK. DURING EARLY MARCH OF THIS YEAR, MY BRAKES FAILED DUE TO RUST AND CORROSION ON THE BRAKE LINES. TWO OF THE STEEL BRAKE LINES UNDER THE TRUCK WERE SO CORRODED WITH RUST THAT THE BRAKE FLUID RUPTURED THE LINES WHEN I APPLIED THE BRAKES, AND POURED OUT ON THE GROUND. MY BRAKED PEDAL WENT TO THE FLOOR. I HAD ZERO BRAKES WITHOUT WARNING. IT WAS ONLY BY SHEER LUCK THAT I WAS TRAVELING VERY SLOWLY WHEN THIS OCCURRED, AND I WAS ABLE TO STOP USING THE EMERGENCY BRAKES. I WAS IN THE TOWN OF RENOVO, AND COULD HAVE KILLED SOMEONE DUE TO THIS MISHAP. WE LIVE ON A MOUNTAIN, AND TOW A TRAILER WITH HORSES. THIS COULD HAVE BEEN A COMPLETE DISASTER UNDER OTHER CIRCUMSTANCES. THERE WAS ABSOLUTELY NO WARNING THAT THE BRAKES WOULD SOON COMPLETELY FAIL. IT COST OVER ONE THOUSAND DOLLARS TO REPLACE ALL OF THE BRAKE LINES ON OUR TRUCK. I HAVE THE RECEIPT. *TR

I JUST WANT TO LET YOU KNOW ABOUT A LITTLE PROBLEM I'M HAVING WITH MY 2001 GMC 4X4 TRUCK. THERE ARE TWO CERTAIN GROCERY STORES I GO TO AND WHEN I START MY TRUCK BACK AT THESE STORES THE GAS GAUGE GOES TO EMPTY AND THE GAS PEDAL LOCKS UP AND CAN NOT BE PUSHED DOWN.THEN I HAVE TO TURN OFF THE ENGINE , THEN WHEN I GET THE GAS PEDAL FREED THEN START THE TRUCK BACK THE GAS PEDAL IS OK. I'M THINKING MY TRUCK'S COMPUTER IS GETTING CONFUSED WITH SOME KIND OF MICRO WAVES OR SOMETHING COMING FROM THE STORES ELECTRICAL DEVICES. I'M WONDERING IF ANYONE ELSE HAS THESE PROBLEMS. *TR