2016 GMC YUKON Complaints

The contact owns a 2016 GMC Yukon. The contact stated that the vehicle was initially repaired under warranty for a bent push rod in cylinder #4; however, the failure recurred. The vehicle was repaired another time at the expense of the contact's son, who previously owned the vehicle; however, the failure persisted. The contact stated that while idling and while driving, the engine was misfiring and running rough. Additionally, there was a significant amount of smoke coming from the exhaust pipe. The check engine warning light was illuminated. The vehicle was taken back to the dealer, where it was diagnosed, and the dealer determined that the engine needed to be replaced. The vehicle was not repaired due to the cost. The manufacturer was contacted and informed that the repair would not be covered because the vehicle was out of warranty. The failure mileage was approximately 27,000.

I was test driving the vehicle after some and as I was test, driving it, the steering lot up on me. Luckily, I was entering a residential area when it occurred down the street from my residency; in which I was able to drive it to my residency, during that short ride, you could smell a burning smell coming out along with some crackling noises. I had to get the vehicle towed a week later to the mechanic shop where they fix one of my engine problems and verified that I needed a new power steering unit and gave me a quote, I couldn’t afford the word and started doing research and came across the recall for the power steering within my vehicle year, make and model. I replaced the power steering unit, but I’m having a difficult time celebrating the system..

Misfire then replaced plugs,coils and wires, then change fuel injector, and problem still there, then started truck and was tossing power and motor started ticking. Every shop told me this is the same common problem they're having with all 6.2L engine and they're all on recall by GM. I know 2016 are not in recall but I think they should be because this problem is in all 6.2L engine

My vehicle has been in 16 times since I bought it the most recent incident is for the engine which started about six months ago. It’s been in since then for other issues concurrently with this one it hesitates like it’s getting stuck in sand before it wants to go first the mechanic told me he didn’t sense it but the thermostat was stuck open so they fix that. Second time it went in they thought it was some sort of a filter and some other components I’m not sure. Again it was not fixed then my son and I were out in Minnesota freezing cold night in November and go and drive and then when again it was the drive train this time that got fixed a month ago about a week ago it starts making a noise like there’s too much snow in the tires. I get my car washed every few days but I got it washed again and that didn’t fix it so it’s in the shop again and I’m paying for a rental again. I have the Walser guard thank the Lord because it’s paid for itself about 15 times over. I’ve gotten two transmissions, an air conditioner, two sensors the arm that other people have complained about I don’t know exactly the name of it the trailer component that you plug into also blew out my seven way and I had to have my seven way wire fixed so I’m nervous about plugging that back in. My dad passed away and I spent $70,000 of my inheritance by this car. I should’ve flushed it down a toilet instead. Everybody makes fun at work that this car is literally gonna kill my kids and I because every other day it feels like we’re stuck on the side of the road.

When making a slow turn in drive or reverse the park assist screen shows it’s not working. Then all screens in the car turn black and the steering locks while driving. Making it impossible to turn or move. This is happening while driving, while parking. Putting my safety and others at risk due to not being able to control the steering. Park assist failure screen pops up then all screens turn black. Car is still on just unable to move. I have not had it checked by a mechanic yet.

Driving after dark on a main street in St George Utah, the engine suddenly surged and then revved down. It felt like someone jamming it into 4WD. Traffic was tailgating me, and I was nearly hit. I could not pull completely out of the right lane. I put on hazard lights. Check engine light came on, and TCS light came on. I decided to get out of traffic & crawled forward about 30 yards into a Sinclair station lot, then backed it into a spot where a tow truck could get it. It was clearly not drivable. Called AAA and a driver was able to get to me within 1/2 an hour. Checked the AAA website for mechanics since I was merely travelling through St. George and had no knowledge of the area. Hawker's Automotive was listed first, with many excellent reviews. Tow truck arrived and driver loaded it on the JerrDan bed. I asked him to take me to the Hawker's garage location. I locked it and put the key in the overnight box with my name, number, and description. Next day the mechanics said lifter arm was collapsed. Needed tearing down, replacing and probably new camshaft. Gave me estimate for "estimated" repair of about $8,000 or new engine at about $12,000! This is a KNOWN GMC failure apparently. Recalls have been initiated on newer models, but every mechanic will tell you that this happens all the time to all the 6.2L, V8 engine at around 150,000. I bought it used at about 156,000 miles and have put about 5,000 miles on it. And changed the oil at purchase, and about 1,000 miles ago. I researched model and year before purchasing. All online reviews I found were positive. Nothing out there on this know manufacturing flaw. But now when I type in 'catastrophic engine failure 2016 Denali XL" many many reviews and videos state that it is a known problem to both GMC and NHTSA. I or someone could have been killed by such a dramatic loss of power! This is a SAFETY issue and NHTSA needs to review ALL THE COMPLAINTS ON FILE ALREADY. Thankyou

There is a hesitation when trying to accelerate. The car will then slam forward and there is a rattling noise that the car also makes. This has almost caused accidents. I was driving in town which is where I do most of my driving.

On [XXX], while idling in my driveway the engine abruptly stopped with a loud clunk and refused to turn over when I attempted to restart it. The vehicle was towed to Bergstrom GMC in Appleton WI. Upon inspection it was determined that a connecting rod and crankshaft bearing had failed requiring replacement of the engine. The vehicle has a 6.2-litre V-8 engine with 106,000 miles on it. The vehicle is currently still at the dealership waiting for the engine replacement at an estimated cost of $18,000. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

The engine is the component that failed and is available for inspection. The issue has been confirmed by an independent service center, and the repair quote is attached. There were no prior warning signs before the failure; the vehicle suddenly began making a knocking noise and experienced a loss of power.

THE fuel pressure line from the fuel pump to the flex fuel sensor chaffed a pin hole leak near the front top of the fuel tank. This caused a significant fuel smell and trace leak at the front of the fuel tank which could lead to a fire or explosion. The new hose has a longer chaffing covering leading me to believe gm knew about this issue. vehicle has 127,000 miles. I feel gm should reimburse me for this repair as a fuel line should not have ever chaffed through and leaked.