2020 GMC YUKON Complaints

We just purchased our Yukon from a dealership in February (2/7/26) and it was diagnosed with premature failure of at least one AFM valve lifter as it is causing engine misfires, shaking and stalling on 7/30/26. We just hit 67,000 miles on the odometer so we are just beyond the warranty coverage. The lifters were replaced previously by the previous owners on 12/16/24.

The vehicle has an unpredictable and random tendency to hesitate when the gas is pressed. This has been happening at some level since the vehicle was new. The dealership service department was never able to get the vehicle to do what I was concerned about, so they never helped resolve the issue. Now that it is out of warranty, the issue is getting worse. It is to the point that I believe it is unsafe for anyone but me to drive it. I have to make sure that when I turn onto a new road, that there is absolutely noone coming because I cannot depend on my vehicle to accelerate quickly enough, even at a normal rate. It may lag and take its time speeding up, or it may accelerate normally with no issues. I stopped going to the dealership for oil changes and checking the issue because they no longer give loaner vehicles and they take a minimum of three hours for an oil change. So I recently took it to my trusted mechanic. He replaced the knock sensors, which helped slightly. He could still detect issues, but was concerned it would require a whole new engine built to bypass the DFM system and repair the cams and lifters. So I nw have to drive a vehicle that needs $20,000 worth of repair, has the potential to be dangerous or leave me broken down on the side of the road. It has 106,000 miles and I still owe $12,000 on it. From my research, I understand that this is a known issue and that there are several lawsuits regarding the issue. That does not help the average person who doesn’t care about a lawsuit, but is justifying st trying to live their average life with a dependable vehicle. Please help!

My family drove from [XXX] to [XXX]. Upon arrival check engine light came on, we proceeded to a local shop, by the time we arrive check engine light was flashing and engine was knocking and was clearly malfunctioning. Shop owner recommended we transport the vehicle back home as service shops in the area were experiencing high volume and parts shortages. We had vehicle towed to a local shop in [XXX]. The engine is giving diagnostic codes P0300, P050D, [XXX] with internal knocking and tapping. Vehicle has been kept current on all oil changes and has no external leaks. GMC wants at least $12,000 to replace the engine. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

The contact owns a 2020 GMC Yukon. The contact stated that while driving at various speeds, the vehicle jerked and the transmission malfunctioned, causing the wheels to lock up and the check engine warning light to illuminate. The vehicle was driven to a local dealer who diagnosed that the transmission clutch and pressure control solenoid had failed. The contact was advised that the transmission needed to be replaced. The vehicle was not yet repaired. The manufacturer was notified of the failure, but no assistance was offered. The contact was informed that the VIN was not included in NHTSA Campaign Number: 26V289000 (Power Train). The contact stated that the vehicle experienced the same failure listed in the recall. The failure mileage was 118,000.

Complete transmission failure at 82,000 miles. Well maintained vehicle, not used for towing or heavy hauling. Required complete replacement. Traveling at highway speeds and-according to repair facility- valve failure caused transmission to overheat a stripped gears, causing complete failure. Vehicle was unable to shift into any gears and was left inoperable. Required towing assistance and replacement.

Issue with the trailer brake system keeps coming up on my dash. I know a lot of other people have had the same issue keeps dinging will not stop causes me to get distracted while driving. Unable to use other features because of this distraction and safety issue. The safety issue needs to be fixed this is an effective product with so many people having an issue you need to do a recall. I did let Graff Chevrolet in Mount Pleasant Michigan no and I took a picture and showed them.

The contact owns a 2020 GMC Yukon. The contact stated that while depressing the accelerator pedal, there was an abnormal popping sound coming from the engine compartment, and the vehicle hesitated while accelerating. The cause of the failure was not yet determined. The manufacturer was notified of the failure, but no assistance was provided. The local dealer had not yet contacted. The failure mileage was 44,000.

Without any indications of a problem our transmission began making a loud whining noise. The evening before it was fine and the next morning on startup the noise just began. The Vehicle only has 45,000 miles on it and the transmission had been serviced at the recommend manufacturer interval. Took it immediately to my auto repair shop where it was diagnosed as a transmission failure (they has seen this before) and told not to drive until replaced due to safety issues related to the failure. Unfortunately, due to a shortage of these needed 10 speed transmission I waited over a month for the vehicle to be repaired. The shop contacted GM to inquire about any warranty help but was told there was none.

The engine light came on and started making noise. We drove it to a mechanic shop, and they said the code stated camshaft and other component issues, but the engine ended up failing completely and was rebuilt. We initially checked for recalls and our VIN did not show any; however, we recently became aware that our engine (6.2L) might be part of the ongoing current problems associated with a recall. We are hoping that GMC will cover any remaining repairs and/or reimburse us for the thousands it has cost us.

My vehicle torque converter repair on my 2020 GMC Yukon is shuddering. Why is this not a recall when there are various Yukons that are experiencing shuddering related to torque converter repair. This should be a recall. The problem has been confirmed by a GMC dealer. There were not warning lamps, no messages, or other symptoms.