2024 GMC YUKON XL Complaints

While driving I had a sudden loss of power. Contacted dealership and was ask for engine code light. Told them no light had appeared on dashboard. Did note intermittent shift changes while driving after this occurrence. Transmission and or engine feels like it has a studder. Concerning.

The contact owns a 2024 GMC Yukon XL. While the contact's wife was driving at an undisclosed speed, the accelerator pedal was depressed; however, the vehicle failed to accelerate as intended. In addition, the contact's wife noticed an abnormal knocking sound before the engine seized. The check engine warning light illuminated. The vehicle was towed to the dealer, where it was diagnosed and DTC: P0305 (lifter on cylinder 5); was retrieved, and the intake valve detached and damaged the camshaft. The contact was informed that the lifters and related parts, camshaft, and the coolant pump needed to be replaced. The vehicle was repaired; however, the failure reoccurred. The vehicle was taken back to the dealer where it was diagnosed with engine failure due to the metal shavings found in the oil. The contact was informed that the engine needed to be replaced. The vehicle was not diagnosed. In addition, the failure had occurred within 2,500 miles of the initial repair. The manufacturer was made aware of the failure ,and a case was filed. The failure mileage was approximately 14,589.

****This complaint is an addendum to ODI Complaint #11715415 **** This report updates the prior complaint to reflect complete engine seizure and pending engine replacement following post-repair loss of propulsion. I respectfully request that NHTSA include my vehicle’s failure in its ongoing evaluations related to L87 engine failures, including Recall 25V-274, Engineering Analysis EA25007, and Recall Query RQ26001. My 2024 GMC Yukon XL Denali experienced progressive internal engine failure beginning at approximately 61, 975 miles. First attempt: The vehicle required camshaft and lifter replacement due to internal mechanical damage. Immediately after 4.5 week repair, the vehicle suffered sudden loss of motive power at highway speed.  The engine shut down without warning at 75 mph with children in the car. (Car was in owners possession for no more than 15 hours, and was driven 25 miles on the highway when it switched to neutral and shut down). Second attempt: The vehicle was towed back to the dealership. Additional electrical repairs were then attempted. (Fuse box) It shut down again during dealer testing. Third attempt: Subsequent internal inspection revealed cylinders 5 and 6 seized, requiring full engine replacement. This represents: • Repeated loss of motive power • Escalation from top-end failure to catastrophic lower-end seizure • Failure occurring immediately after dealer-performed repair(s) • A 2024 model-year vehicle with relatively low mileage Given NHTSA’s ongoing investigations into post-remedy failures (RQ26001) and out-of-scope bearing failures (EA25007), I request that this incident be evaluated as part of the broader defect pattern analysis.

About 4 weeks ago my vehicle began shaking uncontrollably while driving. The check engine light illuminated and multiple warnings appeared including emissions system, variable valve timing system, engine and transmission failures shown on the GMC app. I contacted the selling dealership and was given an appointment 4 days later. Later that day I drove less than 5 miles to pick up my children from school. During that drive the vehicle filled with a strong gasoline odor and exhaust fumes were overwhelming. I feared the vehicle could catch fire. I contacted the dealership again, stated the vehicle was unsafe, dropped it off at approximately 8:00 PM and was required to obtain my own rental vehicle. After one week I was told the engine required a camshaft and lifter replacement. Inspected & approved by extended warranty, parts were ordered and installed. I retrieved the vehicle on 23 days after the initial failure. The following morning (24th day) while driving approximately 75 mph on a major interstate with my children the vehicle suddenly shifted into neutral and would not re-engage. I was unable to shift into any gear and coasted to a narrow shoulder inches from traffic and guardrail.The dashboard stated the vehicle could not shift into gear and instructed me to push the start button. The engine would not restart. We were stranded approximately two hours in 10-degree weather on a major interstate with heavy semi-truck traffic. Roadside assistance was required. 3 days later the dealership stated the failure was a fuse block. After replacement the vehicle was test driven and stated to be operating normally. A second dealership employee test drove the vehicle, it died again and had to be towed back to the dealership. The battery was replaced after draining while disabled. Repeated mechanical and electrical failures resulted in complete loss of power at highway speeds and placed my children and me in immediate danger. I no longer believe this vehicle is safe to operate.

I am filing this complaint regarding a serious and ongoing safety issue with my GMC Yukon Denali that began with a complete engine failure while driving on the highway with my entire family in the vehicle. While driving at highway speed (about 60–70 mph), the vehicle suddenly lost power and shifted into neutral on its own. While still moving, I tried multiple times to shift back into Drive so I could safely get off the road, but it would not engage. I was only able to coast partially onto the shoulder before the vehicle came to a complete stop, still partly exposed to traffic. The engine shut off and would not restart at all. It would not go into Drive or Neutral, and the vehicle was completely dead. And it had to be towed. The dealer later told me the engine had failed and that a new engine was installed. About a week later, I picked the vehicle up. Less than 20 minutes after leaving the dealership and getting back on the highway, smoke started coming from the vehicle and warnings appeared, messages that the engine was overheating and that I needed to stop the engine immediately. The vehicle was not drivable again and had to be towed back. I again had to arrange transportation home. A few days later, I picked the vehicle up again. Since then, I have had serious four-wheel-drive and drivetrain issues. The vehicle became stuck in 4 Low and I could not get it out for over a day. When it finally came out, the drive mode buttons stopped working correctly. Selecting 2 High sometimes puts it into 4 High, selecting Auto puts it into 2 High, and Auto mode no longer appears. Even when it shows 4 High, the steering is restricted cannot steer 100% to the right or left and the vehicle binds, pops, and jumps when turning. I believe this vehicle is unsafe and poses a serious risk.

Transmission appears to be lunging and shuttering. Dealer has indicated that the valve body need to be replaced or the vehicle could leave me stranded or without propulsion while driving. From my research this appears to be related to other safety recall and service campaigns for this type of vehicle and the transmission that I have in my vehicle. Also the camera system doesn't work correctly as it relates to parking assist and collision control. My repair dealership has stated they are having trouble getting GM to cover this repair.

Good morning. It’s about the safety recall for loss of propulsion due to manufacturing defects that can lead to engine damage and engine failure. GM notified me about this in September 2025 . So, I drove my vehicle to the dealership to inspect my vehicle , my SUV passed the examination, they replaced the oil recommending now another one with higher viscosity, new oil cap and an owner’s manual insert free of charge. Ladies and gentlemen; My concern from here on now is, just doing this is going to give me a peace of mind? Meaning the manufacturer defects issue is not longer in my vehicle? I paid a top dollar for this specific unit because I like to travel across the country even to go to Mexico. Right now I’m driving the truck silent, no music at all.driving the vehicle just to go to the store, to buy groceries,very short trips, around my neighborhood Trying to hear any noise, any knocking noise on my engine, observing the dashboard controls constantly, my family and I decided to stop traveling due to my vehicle is not secure to do it with this particular 6.2 engine because my notification letter from GM says that if the vehicle fails during operation will lose control increasing the risk of crash. As a GM customer, using my vehicle with my family I don’t feel safe and comfortable with my vehicle therefore I am asking and expecting for a better solution from General Motors. Not just replacing the oil for another one with a higher viscosity because doing this only is telling me that it’s just a cheap remedy, but the manufacturer defects are still there with my vehicle . I know they extended the warranty to cover this defect if something happens in the future, but isn’t about that , is about the safety, the concerns, the feelings of the family members involved in this insecure situation while driving this vehicle in the highway at 70 miles an hour.Ladies and gentlemen. I am pretty sure you can help us with this petition , GM should be able to do something way better.

My vehicle failed the Picotest that GM is conducting on the engine. It is currently sitting at Romain GMC in Evansville Indiana. I am not sure if I was at risk but the dealership says it's unsafe to drive so my assumption is that my safety was at risk. The dealership states that it will take 3 months before a new engine is installed. There were no symptoms leading up to this recall inspection.

The contact owns a 2024 GMC Yukon XL. The contact stated that while driving at 70 MPH on the highway and attempting to accelerate around a possible drunk driver traveling on the roadway, the vehicle failed to respond as needed. The driver was able to pull over safely. There were no warning lights illuminated. The contact called 911 and called for Roadside Assistance, and the vehicle was towed to a local dealer, where it was diagnosed with an engine failure. The vehicle was not repaired. The vehicle was previously taken to the local dealer to be repaired under NHTSA Campaign Number: 25V274000 (Engine and Engine Cooling). The manufacturer was contacted, but no assistance was provided. The failure mileage was approximately 32,000.

I was driving on interstate and thank God I got off the exit and vehicle suddenly cut off. An indicator came on stating to push start to restart vehicle while the vehicle shifted to Neutral on its own. Then a Low oil pressure sign came up on dashboard. I tried push start again and nothing happened. Lucky by this time I was just off the exit so I was able to come to a stop and shift to Park. I tried push start again and the dashboard just went dark and started making a clicking noise. After some time around 1 min I tried again and it did crank up and I was able to try and get as close the the edge as possible but still in a two lane road on the bridge of an off ramp. I say thank God because 30 seconds sooner I was going around 60mph with my 4 month old in the backseat. Lucky I got to the exit when this happened. From the research I have done apparently this happens a lot to this model I have 2024 GMC Yukon Denali XL. I had a recall for this issues supposedly fixed back in October 2025. Things could of been much worse. Also this all happen coming from just having an oil change done at the dealer. Literally leaving the dealership going home. The dealership loaned me a vehicle they say for 3 days for free after that I may have to pay because it may not be covered by GM which is ridiculous. The vehicle is at the dealer and I will be waiting to hear there analysis.