2015 GMC YUKON XL Complaints

The contact owns a 2015 GMC Yukon. The contact stated that while driving at 35 MPH to work, the vehicle shifted into neutral and into low and failed to drive at about 20 MPH. The check engine light was flashing. The front collision was unavailable. The contact left the vehicle at a gas station. Upon research, the contact located NHTSA Campaign Number: 14V374000 (Power Train), which was similar to the failure. The local dealer was contacted, who confirmed there were no open recalls. The vehicle was not diagnosed or repaired. The manufacturer was contacted via chat, who referred her to the local dealer and manufacturer service center. The contact informed her to confirm the coverage with the dealer. The failure mileage was approximately 283,000.

The contact owns a 2015 GMC Yukon XL. The contact stated while driving at various speeds, the vehicle shuddered. The contact stated that upon pulling into a parking lot, the vehicle stalled. The vehicle was pushed into a parking space with assistance. Additionally, the contact stated that while her husband was test-driving the vehicle in the driveway by driving forward and reversing several times, the transmission locked up while depressing the brake pedal the thirteenth time. A mobile mechanic diagnosed the vehicle and determined that the transmission control module had failed. The vehicle was not repaired. The manufacturer was notified of the failure and informed the contact that the VIN was not included in a related recall. The failure mileage was approximately 177,000.

Yes, that case number would be 91762225 (With GM). You are most welcome. Thank you for contacting Chevrolet Customer Assistance and have a nice day! Please don’t hesitate to reach out if you need anything else. VIN1GKS2HKC8FR165487 Special Coverage Adjustment N182180270 Tail Lamps Inoperative Having issues described by NTSA and vehicle has 62,000 miles but falls after the expiration date. I contacted GM and they were very nice but they were unwilling to help in any way. Any help would be appreciated.

The contact owns a 2015 GMC Yukon XL. The contact stated that while driving 70 MPH and exiting the highway, the brake pedal was depressed but the brake pedal was stiff and stuck, requiring that the transmission be shifted to neutral(N), and to stand on the brake pedal with both feet. The contact continuously pumped the brake pedal, but the vehicle slowly responded and almost crashed into other vehicles. There was no warning light illuminated. The contact's wife and daughter were also inside the vehicle during the failure and were frightened and concerned for their safety during the failure. The dealer was contacted and was provided a description of the failure over the phone. The dealer informed the contact that the vacuum pump and an unknown part had possibly failed. The contact was advised that the failure was possibly related to NHTSA Campaign Number: 19V645000 (Service Brakes, Hydraulic); however, the VIN was not included in the recall, and there was no warranty coverage on the vehicle for the failure. Additionally, the check engine warning light was illuminated. The vehicle was not diagnosed or repaired due to the cost. The manufacturer was notified of the failure and referred the contact to the NHTSA Hotline for assistance. The failure mileage was approximately 143,000.

While driving back home from my trip the truck all a sudden made a squealing noise and the engine just stopped. I was on the high way . I was able to coast the vehicle off onto the exit ramp. The vehicle was towed home. The following day it was towed to the repair shop. The shop has confirmed engine failure. Will need to replace the engine . Still waiting for warranty approval.

The contact owns a 2015 GMC Yukon XL. The contact stated that when the vehicle was started, the vehicle started shaking with a tapping sound coming from the engine compartment. The contact stated that there were no warning lights illuminated. The contact stated that while driving at an undisclosed speed around the block, the failure persisted. The vehicle was parked at the residence. The vehicle was taken to a dealer, where it was diagnosed and determined that the lifters in the engine were loose, and the lifters and the right side of the engine needed to be replaced. The vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 100,000.

The transmission shifts hard in low gears. I have done research, and it seems like this is a common problem that a vast amount of these vehicles have. I honestly think that this is has to be looked into for a recall. There is countless information on the web with videos, other owners, and transmission businesses explaining about it.

The contact owns a 2015 GMC Yukon XL. The contact stated that upon starting the vehicle, the transmission shifted hard from first to second gear while depressing the accelerator pedal. There was no warning light illuminated. The contact stated that while driving 80 MPH, the vehicle independently decelerated while depressing the accelerator pedal, and the vehicle started shaking abnormally. The vehicle was taken to an independent and several internal parts of the transmission were replaced, and the Transmission Control Module (TCM) was also replaced; however, the failure persisted. The vehicle was then taken to a dealer, where the contact was informed that the repairs had not addressed the cause of the failure. The contact was informed that the failure was likely related to the transfer case. The vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 161,000.

The Active Fuel Management (AFM) system malfunctioned causing not all engine cylinders to fire at critical times, thus causing a safety issue when the vehicle has insufficient power traveling at highway speed. The AFM is intended to transition from 8 cylinder power to 4 cylinder power to save fuel. However it malfunctioned so that it couldn't transition back from 4 cylinder power. The malfunction occurred while driving at highway speed, approximately 70 mph and towing a trailer. There were no warning messages or other symptoms prior to the failure. This malfunction necessitated removal and replacement of the engine. A certified mechanic completed the repair work.

Service Box appears indicating - "Trailer Brake System" with a loud BING, BING, BING Alert sound. It continues every few minutes... Please note: we aren't using a trailer... I have googled/youtube it and found that this is an issue with many owners. They indicate that the wire harness in between two of the body control modules is defective. It is known to have faulty wire connection. This is intermittent, goes for months and stops for months, and then starts up again. Starting the vehicle, while driving slow or fast, it doesn't matter.