GMC Complaints

16,000 miles driven and my replace brake sensor light came on the dashboard. I took it in to get looked at and was told the Front Drivers Side has 1 brake pad showing a life of 5 while my other pads all showed a life of 9/10. I was told that most likely something stuck inside the brake pad itself causing it to wear unevenly but I don't drive anything but highway and paved roads. I looked around other forums and multiple others are complaining of the same issue. I contacted GM and they told me brakes are a wear item. The dealer told me they aren't sure how it happened, but this isn't right to be replacing brakes on a brand new vehicle I've only driven for 10 months. Multiple others are saying the same thing in GM/Colorado forums.

My 2021 GMC Yukon Denali is affected by NHTSA Recall #25V-274. The recall notice states that defects in the engine’s connecting rod and/or crankshaft can cause engine damage and failure, resulting in sudden loss of propulsion and increasing crash risk. The recall status for my vehicle is currently listed as “Incomplete – Remedy Not Available.” My dealership confirmed that no repair is available and further told me that GMC will not authorize a buyback, trade-in, or loaner vehicle until a remedy is developed. This has left me with an unsafe vehicle that cannot be repaired, yet I am still obligated to make monthly payments. This defect creates a serious crash risk because the engine may fail and the vehicle could lose all propulsion without warning. My family is forced to either risk driving a defective vehicle or go without reliable transportation. Dealer Interaction •Dealer confirmed that the recall is active but has no available remedy. •Dealer stated GMC will not authorize a buyback, trade-in, or loaner vehicle until the recall repair is developed. •I am effectively stranded with an unsafe vehicle and no safe options. Remedy I am requesting that GMC be required to: 1.Buy back my vehicle under federal recall and warranty obligations; or 2.Provide a safe, comparable loaner or replacement vehicle at no cost until the defect is remedied. If a loaner is provided, I will continue making my monthly payments on my Yukon Denali.

The contact owns a 2021 GMC Yukon. The contact stated that while the vehicle was started and running, there was a hollow clunking sound coming from the engine compartment. The vehicle was taken to a dealer and was diagnosed with crankshaft bearing failure. The contact was informed that the crankshaft bearings needed to be replaced. The vehicle was not repaired. The contact believed that the failure was associated with an unknown recall. The manufacturer was notified of the failure. The failure mileage was approximately 82,000.

The check engine light is illuminated. Diagnostic information from the OnStar system indicates a fault within the engine cooling system. The engine cooling fan remains engaged continuously, suggesting a possible malfunction with the cooling system components or related sensors.

At 12,018 miles on my 2024 gmc sierra 1500 I experienced a rear wheel lock up. I have 4wheel drive capability but I had the truck in rear wheel drive only. Thankfully I was not going fast at the time. I was going between 35-45 mph when experiencing the lock up. As I was going down a straight away, I experienced a rear wheel lock up of my 10L80 transmission. My tires were squealing like crazy. I pulled off onto the side of the road. After shifting to reverse and then park and then drive the problem corrected itself. When I brought it into the dealership, they could not find anything wrong with it. Additionally my trucks software was up to date and not lacking any updates. I don’t drive this truck very far and only drive about 150 miles a week. A rear wheel lock up of this magnitude at this low of miles is concerning. I’m not rough on the truck by any means. It’s more so a family vehicle than a hauler. I have got the truck serviced 3 times since I bought it for regular maintenance so that’s not an issue either. There were no warning indicators that this problem was occurring when I experienced the rear wheel lock up. This could have resulted in a collision with vehicles around me if I had not been aware of what was occurring.

The contact owns a 2023 GMC Yukon. The contact stated that while driving at an undisclosed speed, the Forward Collision Avoidance sensor failed to function as intended. The contact stated that the failure occurred while exiting a parking space. The contact stated that the images on the screen displayed a wider distance between the two vehicles. The contact stated that because of the failure, the passenger’s side rear bumper crashed into the front driver’s side bumper of another vehicle. The vehicle was taken to the dealer. The vehicle was repaired. The failure reoccurred. In addition, the contact stated that the Forward Collision Avoidance sensor and the back-over prevention camera system were not functioning as intended. The contact stated that the failure had occurred while reversing and while driving forward. The contact stated that the images were displayed at an incorrect distance. The contact stated that the failure was persistent. The dealer was made aware of the failure; however, the contact was informed that the repair was not covered under an unknown recall. The manufacturer was not made aware of the failure. The failure mileage was unknown.

Recently, I just purchased my vehicle from Wally Edgar Chervolet with no open recalls on the vehicle. As of September 29th, 2025 for my very first oil change on the vehicle I was made aware for 4 OPEN Recalls which was told to me at the time of purchase. The dealership closed the all recalls without actually checking my make the vehicle was safe to drive. The Recall Numbers are: N252510321, N222362040, N212356230, N222357620.

Shift to Park light remains on after you’ve put the car in “park” which could potentially run the battery down. Car does not recognize when it is in “park”. Have to “jiggle” the gear a bit, in hopes that it turns off.

Break monitors for front breaks have dislodged and caused damage to rotors and pads. Dealer claims this is normal wear! Breaks shimmy when breaking in all directions and squeak when backing. I travel to my work requiring mountain passes during inclement weather. The most important safety method while traveling on snow and ice is smooth steering, acceleration and breaking. With my font breaks shimmying, I am concerned for my safe control of the vehicle. Thank you in advance for your attention to this matter.

The contact owns a 2016 GMC Canyon. The contact stated that the headlights failed to activate automatically. Additionally, one of the phone charger ports had become inoperable. The contact stated that while driving at various speeds, the vehicle lost power steering functionality. A message advising that the power steering was inoperable and to drive carefully was displayed. The contact pulled over to the side of the road and turned off and restarted the vehicle, and the power steering functionality returned. Additionally, the contact stated while driving 50-55 MPH after the power steering failure, the vehicle was pulling to the right. The dealer was contacted, and an appointment was scheduled for a diagnostic test. The vehicle was not diagnosed or repaired. The manufacturer was notified of the failure and referred the contact to the NHTSA Hotline for assistance. The failure mileage was approximately 105,000.