2021 JEEP GLADIATOR Complaints

The vehicle auto starts when the defrost is turned on below the max or full setting. The owner’s manual specifies that “the engine will start automatically when” the “HVAC is set to full defrost mode”. The vehicle is operating in direct conflict with owner’s manual. This auto start issue poses a serious safety hazard as the vehicle will unexpectedly start and may begin to roll when the driver is not ready. Additionally, if someone is operating on or under the vehicle, it will result in a serious injury or the loss of a finger when the vehicle auto starts in violation of the driver’s intent. The unexpected / wanted start could cause a collision with another vehicle or pedestrian leading to serious injury or death. The malfunction was reproduced and confirmed by multiple service personnel, who expressed safety concerns. The malfunction was also recreated by 4 independent mechanic shops and documented as a safety concern. However, an FCA Technical Advisor (TA) claimed that the vehicle is “operating as designed“. This portion of the vehicle’s Auto Start / Stop System is NOT operating as designed and documented in the owner’s manual. I feel unsafe driving the vehicle, as this is one of numerous hardware / software malfunctions plaguing the vehicle. The vehicle is available for inspection upon request.

The vehicle auto starts when the brake pedal is pressed. The owner’s manual does not list this as one of the “Conditions that will cause the engine to start automatically”. The vehicle is operating in direct conflict with owner’s manual. This auto start issue poses a serious safety hazard as the vehicle will unexpectedly start and begin to roll when the driver is not ready. Additionally, if someone is operating on or under the vehicle, it will result in a serious injury or the loss of a finger when the vehicle auto starts in violation of the driver’s intent. The unexpected / wanted start could cause a collision with another vehicle or pedestrian leading to serious injury or death. The malfunction was reproduced and confirmed by multiple service personnel at 2 Jeep dealerships, who expressed safety concerns. The malfunction was also recreated by 4 independent mechanic shops and documented as a safety concern. However, an FCA Technical Advisor (TA) claimed that the vehicle is “operating as designed“. This portion of the vehicle’s Auto Start / Stop System is NOT operating as designed and documented in the owner’s manual. I feel unsafe driving the vehicle, as this is one of numerous hardware / software malfunctions plaguing the vehicle. The vehicle is available for inspection upon request.

The vehicle auto starts when opening the driver’s door. This is not listed under “Conditions that will cause the engine to start automatically while in STOP/START AUTO STOP ACTIVE mode” in the owner’s manual. Other Jeep models do not auto start upon opening the driver’s door. This auto start issue poses a serious safety hazard as the vehicle will unexpectedly start and begin to roll when the driver’s door is open and the driver is not properly secure in the driver seat. The unexpected / wanted start could cause a collision with another vehicle or pedestrian leading to serious injury or death. The malfunction was reproduced and confirmed by multiple service personnel at 2 Jeep dealerships, who expressed safety concerns. The malfunction was also recreated by 4 independent mechanic shops and documented as a safety concern. However, an FCA Technical Advisor (TA) claimed that the vehicle is “operating as designed“. This portion of the vehicle’s Auto Start / Stop System is NOT operating as designed and documented in the owner’s manual. I feel unsafe driving the vehicle, as this is one of numerous hardware / software malfunctions plaguing the vehicle. The vehicle is available for inspection upon request.

The vehicle auto stops when the defrost is turned off, in direct conflict with owner’s manual. The owner’s manual specifies that “HVAC is set to full defrost mode” will prevent an auto stop, but preventing the auto stop is the opposite of initiating the event. Additionally, this issue occurs when the HVAC is operating at less than full defrost mode. Furthermore, the instrument cluster never presents a “STOP/START READY” message which is the first necessary condition for an auto stop. This issue creates a serious safety hazard, as the vehicle presents incorrect information to the driver and the vehicle unexpectedly stops in traffic which confuses and distracts the driver. The unexpected / wanted stop in heavy traffic could cause a rear-end collision leading to serious injury or death. The malfunction was reproduced and confirmed by multiple service personnel, who expressed safety concerns. The malfunction was also recreated by 4 independent mechanic shops and documented as a safety concern. However, an FCA Technical Advisor (TA) claimed that the vehicle is “operating as designed“. This portion of the vehicle’s Auto Start / Stop System is NOT operating as designed and documented in the owner’s manual. I feel unsafe driving the vehicle, as this is one of numerous hardware / software malfunctions plaguing the vehicle. The vehicle is available for inspection upon request.

The vehicle auto stops when the steering wheel is turned, in direct conflict with owner’s manual. The owner’s manual specifies that “Steering angle beyond threshold” will prevent an auto stop, but preventing the auto stop is the opposite of initiating the event. Furthermore, the instrument cluster never presents a “STOP/START READY” message which is the first necessary condition for an auto stop. This issue creates a serious safety hazard, as the vehicle presents incorrect information to the driver and the vehicle unexpectedly stops in traffic which confuses and distracts the driver. The unexpected / wanted stop in heavy traffic could cause a rear-end collision leading to serious injury or death. The malfunction was reproduced and confirmed by multiple service personnel, who expressed safety concerns. The malfunction was also recreated by 4 independent mechanic shops and documented as a safety concern. However, an FCA Technical Advisor (TA) claimed that the vehicle is “operating as designed“. This portion of the vehicle’s Auto Start / Stop System is NOT operating as designed and documented in the owner’s manual. I feel unsafe driving the vehicle, as this is one of numerous hardware / software malfunctions plaguing the vehicle. The vehicle is available for inspection upon request.

The failure of the vehicle’s safety condition check for an empty driver’s seat for an auto stop indicates that the “Occupant Restraint Controller (ORC)” and/or the “Advanced Front Air Bag system” are not receiving proper information. This creates a serious safety hazard as the front air bags may not deploy or may not “adjust the inflation rate of the Advanced Front Air Bags” as specified in the owner’s manual. For driver safety, these systems and their associated sensors should be fully examined and tested. The vehicle auto stops when the driver’s seat is not occupied, in direct conflict with owner’s manual. The owner’s manual specifically states that if the “Driver’s seat is not occupied” that the “engine will not stop.” Note that this system safety check is separate and distinct from the “Driver’s seat belt is not buckled” check. The vehicle fails to properly check for the empty driver’s seat safety condition before initiating an auto stop. The associated auto stop malfunction was reproduced and confirmed by multiple service personnel at 2 Jeep dealerships, who expressed safety concerns. The malfunction was also recreated by 4 independent mechanic shops and documented as a safety concern. However, an FCA Technical Advisor (TA) claimed that the vehicle is “operating as designed“, despite the vehicle operating in violation of the owner’s manual. I feel unsafe driving the vehicle, as this is one of numerous hardware / software malfunctions plaguing the vehicle. The vehicle is available for inspection upon request.

The vehicle auto stops when the driver’s seat is not occupied, in direct conflict with owner’s manual. The owner’s manual specifically states that if the “Driver’s seat is not occupied” that the “engine will not stop.” Note that this system safety check is separate and distinct from the “Driver’s seat belt is not buckled” check. Furthermore, the instrument cluster never presents a “STOP/START READY” message which is the first necessary condition for an auto stop. The vehicle fails to properly check for the empty driver’s seat safety condition before auto stop. This auto stop violates Jeep’s published safety check condition and poses a serious safety hazard. This issue poses additionally serious safety hazards as the vehicle will shut off with the driver outside the vehicle, leaving the driver with an incorrect understanding that the vehicle is properly locked out from an auto start condition. Therefore, if the driver is operating on or under the vehicle with it auto stopped, the passenger can unintendedly auto start the vehicle resulting in a serious injury or the loss of a finger. Additionally, in thinking that the vehicle is off the driver may leave the vehicle unattended in their garage and after 5 minutes the vehicle will auto start filling the garage / house with toxic fumes and presenting a serious life-threatening fire hazard. The malfunction was reproduced and confirmed by multiple service personnel, who expressed safety concerns. The malfunction was also recreated by 4 independent mechanic shops and documented as a safety concern. However, an FCA Technical Advisor (TA) claimed that the vehicle is “operating as designed“. This portion of the vehicle’s Auto Start / Stop System is NOT operating as designed and documented in the owner’s manual. I feel unsafe driving the vehicle, as this is one of numerous hardware / software malfunctions plaguing the vehicle. The vehicle is available for inspection upon request.

The vehicle auto stops when the hood is closed and the driver remains in the seat with the seat belt buckled. The owner’s manual specifies that an open hood will prevent an auto stop, but preventing the auto stop is the opposite of closing the hood initiating the event. Furthermore, the instrument cluster never presents a “STOP/START READY” message which is the first necessary condition for an auto stop. This issue creates a serious safety hazard, as the vehicle presents incorrect information to the driver and the vehicle unexpectedly stops which confuses and distracts the driver. Additionally, after jump starting another vehicle, the vehicle’s battery may be sufficiently depleted. Upon closing the hood, the vehicle could auto stop, and with the numerous other malfunctions impacting the auto stop system the vehicle may not be able to restart possibly leaving the driver stranded. The unexpected / wanted auto stop could cause a rear-end collision of the stranded vehicle leading to serious injury or death. The malfunction was reproduced and confirmed by multiple service personnel, who expressed safety concerns. The malfunction was also recreated by 4 independent mechanic shops and documented as a safety concern. However, an FCA Technical Advisor (TA) claimed that the vehicle is “operating as designed“. This portion of the vehicle’s Auto Start / Stop System is NOT operating as designed and documented in the owner’s manual. I feel unsafe driving the vehicle, as this is one of numerous hardware / software malfunctions plaguing the vehicle. The vehicle is available for inspection upon request.

The vehicle auto stops when turning down or turning off the climate controls, in direct conflict with owner’s manual. This condition is not listed as one of the three conditions to activate an auto stop in the owner’s manual. This condition is also not listed as one of the conditions that will inhibit the vehicle from an auto stop in the owner’s manual. Furthermore, the instrument cluster never presents a “STOP/START READY” message which is the first necessary condition for an auto stop. This issue creates a serious safety hazard, as the vehicle presents incorrect information to the driver and the vehicle unexpectedly stops in traffic which confuses and distracts the driver. The unexpected / wanted stop in heavy traffic could cause a rear-end collision leading to serious injury or death. The malfunction was reproduced and confirmed by multiple service personnel at 2 different dealerships, who expressed safety concerns. The malfunction was also recreated by 4 independent mechanic shops and documented as a safety concern. However, an FCA Technical Advisor (TA) claimed that the vehicle is “operating as designed“. This portion of the vehicle’s Auto Start / Stop System is NOT operating as designed and documented in the owner’s manual. I feel unsafe driving the vehicle, as this is one of numerous hardware / software malfunctions plaguing the vehicle. The vehicle is available for inspection upon request.

The vehicle auto stops when putting on the driver’s seat belt, in direct conflict with owner’s manual. The owner’s manual specifies that if the “Driver’s seat belt is not buckled” it will prevent an auto stop, but preventing the auto stop is the opposite of the act of buckling the seat belt initiating the auto stop. Furthermore, the instrument cluster does not present a “STOP/START READY” message which is the first necessary condition for an auto stop. This issue creates a serious safety hazard, as the vehicle presents factually incorrect information to the driver and the vehicle unexpectedly stops creating driver confusion and distraction. Additionally, this creates a serious safety hazard as the issue inhibits the driver from attempting to flee an emergency situation, wherein the driver hops into an idling vehicle, plugs in their seat belt, and the vehicle turns itself off. The malfunction was reproduced and confirmed by multiple service personnel at 2 different dealerships, who expressed safety concerns. The malfunction was also recreated by 4 independent mechanic shops and documented as a safety concern. However, an FCA Technical Advisor (TA) claimed that the vehicle is “operating as designed“. This portion of the vehicle’s Auto Start / Stop System is NOT operating as designed and documented in the owner’s manual. I feel unsafe driving the vehicle, as this is one of numerous hardware / software malfunctions plaguing the vehicle. The vehicle is available for inspection upon request.