2006 JEEP LIBERTY Complaints

Two of my sons were involved in a rollover accident. Thankfully, they are ok with minor injuries and bruising. However, none of the airbags deployed.

ball joint recall was issues and done on paper in August 2006 on the Jeep liberty. Both ball joint have failed on this vehicle at different times this year while driving the vehicle and Jeep has declined to take any responsibility in any way. This is a major safety concern as any kind of speed while this occurs would be catastrophic. I suspect that Jeep submitted that the recall was fixed when in fact it was not and documents were falsified.

The contact owns a 2006 Jeep Liberty. The contact stated that while driving at an undisclosed speed, the steering wheel was loose, with a clunking sound coming from the steering wheel. The vehicle was taken for inspection and failed the inspection. The vehicle was diagnosed by a certified mechanic, and the contact was informed that the driver's side ball joint was detaching and needed to be replaced. The vehicle was taken to another certified mechanic to be repaired. Two years later, the steering was loose again. The vehicle was taken for inspection, and it failed the inspection again. The vehicle was not repaired. The contact researched and found information about NHTSA Campaign Number: 06V288000 (Suspension); and associated the failure with the recall. The dealer was contacted and confirmed that the VIN was not included in the recall. The manufacturer was not made aware of the issue. The failure mileage was 87,803.

Odometer Fraud. The contact purchased a 2006 Jeep Liberty on January 16, 2026, from a used car dealer. While attempting to obtain insurance for the vehicle, the insurance company discovered a mileage discrepancy. The insurance company informed the contact that the vehicle could not be insured due to the mileage discrepancy. The dealer was contacted however, while attempting to retrieve a Carfax report; Carfax could not provide the report. At the time of the purchase, the mileage was 143,000; however, the insurance company discovered that the mileage was 168,000 in 2020.

The front lower ball joints have repeatedly failed under recall. The dealer says I now have to pay to have it repaired properly, under recall

Vehicle: 2006 Jeep Liberty VIN: [XXX] Summary: The front lower ball joint on my 2006 Jeep Liberty failed while the vehicle was in normal use. This failure matches the defect described in NHTSA Recall 06V288000 (Chrysler F23), which involves corrosion and separation of the front lower ball joints. My VIN does not currently show this recall as open, but the failure occurred exactly as described in the recall documentation. Details: In November 2025, the front end of the vehicle collapsed due to a lower ball joint separation. The joint failed without warning, causing loss of steering control. The vehicle had to be towed home by AAA. The failure is consistent with the recall condition involving water intrusion, corrosion, and separation of the lower ball joint from the steering knuckle. The vehicle still has other open recalls (fuel tank and rear lower control arms), but the front lower ball joint recall does not appear as open in the NHTSA VIN lookup. I believe the recall may have been incorrectly marked as completed in the past, or the original repair was not performed or not performed correctly. The defect has clearly recurred. Safety Concern: This is a serious safety hazard. The ball joint separation caused sudden loss of steering and could have resulted in a crash. The defect is identical to the condition described in Recall 06V288000. Requested Action: I am requesting that NHTSA review this case and require Chrysler/Stellantis to perform the recall repair for the front lower ball joints, as the defect has reoccurred and the recall never expires. I also request verification of whether the recall was ever properly completed on this VIN. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

The contact owns a 2006 Jeep Liberty. The contact stated that while driving approximately 20-25 MPH, the front control arm fractured. The front wheel seized, and the vehicle drove into a driveway. There were no warning lights illuminated. The vehicle was towed to the residence. The local dealer was contacted and suggested an appointment, and that the rear control arm was not covered under warranty. The contact was informed about NHTSA Campaign Number: 13V252000 (Fuel System, Gasoline, Structure) and NHTSA Campaign Number: 18V278000 (Suspension). The vehicle was not diagnosed or repaired. The manufacturer was contacted and referred the contact to the local dealer for assistance. The approximate failure mileage was 180,000.

Every time I pump gas it spits back out at me. No matter what I do. This is completely unacceptable and dangerous

The contact owns a 2006 Jeep Liberty. The contact stated that while reversing, the contact noticed an abnormal sound before the vehicle stopped. The contact stated that upon inspecting the vehicle, the front of the vehicle had lowered unintendedly. The contact noticed that the front lower ball joint had detached and separated from the spindle. The vehicle was not diagnosed or repaired by an independent mechanic or the dealer. The dealer was made aware of the failure. The contact referenced an unknown recall; however, the VIN was not included in the recall. The manufacturer was not made aware of the failure. The failure mileage was approximately 214,564.

The contact owns a 2006 Jeep Liberty. The contact stated while driving on the highway at 55 MPH, there was an abnormal popping sound coming from the front passenger’s side, and the vehicle started to skid. There was no warning light illuminated. The contact pulled over onto the side of the road to park and inspect the vehicle and became aware that the front passenger’s side lower ball joint was fractured. The vehicle was towed to a local independent mechanic where the vehicle was diagnosed, and the contact was informed that the lower ball joint was fractured and needed to be replaced. The vehicle was repaired. The manufacturer was notified of the failure. The approximate failure mileage was 213,000.