2020 JEEP WRANGLER Complaints

I am getting an error message to "service shifter", and "service stability". The cars goes into a limp mode. The dash board alarms every error possible. Driving the car is unsafe, as it is unpredictable. When the car is off and the keys are not in it, the car will run in some way because the windshield wipers will start working. The vehicle has been brought to the dealership 4 times now with the same problem. They have not yet been able to permanently correct the issue. At most, I have gone 50 mile until the issue comes back. The warning messages will "ding" and appear on screen and the steering wheel will prevent driving any other way than straight forward. There were no other symptoms in the car, the car has been serviced regularly and on schedule by the dealership, and has approx 32K miles at this time. I have been researching the issue in different forums, and it appears that this has been reported as an issue since 2018. Unfortunately, I have yet to see a solution posted on the matter.

RECEIVED FCA NOTICE FOR EMISSIONS RECALL Y68 ON MY JEEP WRANGLER. WHY DOES THIS NOT SHOW UP ON YOUR WEBSITE?? CODE IS LW142704 FOR PCM SOFTWARE UPDATE - Y68

MY HUSBAND AND I HAVE HAD 4 INCIDENTS OF SHAKING OF THIS VEHICLE AFTER TURNING SLIGHTLY WHEN HITTING A BUMP IN THE ROAD WHETHER TRAVELING 45 OR 65 MILES PER HOUR. INITIALLY WHEN LEASED HAD SOME STEERING ISSUES WHICH WE ATTRIBUTED TO TIRE PRESSURE. 1ST INCIDENT OCCURRED 11/20 SENT TO GARAGE AND HAD A STEERING ADJUSTMENT DUE TO RECALL. IN MARCH OF THIS YEAR TWO OTHER INCIDENTS. COMPLAINTS HAVE BEEN SENT TO THE COMPANY, A CASE MANAGER ASSIGNED. CURRENTLY IN THE GARAGE, THE DIAGNOSTIC WAS NEGATIVE AND THE CAR HAD TO BE BROKEN DOWN AND A NEW STABILIZER APPLIED. DID NOT WORK ACCORDING TO TECH, SHAKING WAS WORSE. I AM WAITING TO HEAR FROM CM NO VERBAL CONTACT AT ALL. THE CAR IS UNSAFE. I AM NOT SURE IF ANYONE HAS REPORTED HOWEVER ON LINE REPORTS ON ELECTRONIC MEDIA ARE NUMEROUS. I FEEL IT NEEDS TO BE INVESTIGATED DUE TO THE LAST INCIDENT ON A 4 LANE ROAD PASSING A TRUCK WAS SCARY. I DO THINK DEATH SHOULD BE A REASON AND I THINK IT IS SAD TO HAVE TO CONTACT AN ATTORNEY TO DRIVE SAFETY. LET ME KNOW IF YOU NEED FURTHER DETAILS.

When you try to accelerate on to highway or try to accelerate to change lanes the engine losses power or the power shuts down. Trying to pass and losing power I had to return to my previous lane and forced several vehicles to slam on their brakes in my previous lane so I could return. Loosing power trying to enter the passing lane forced the vehicle to slam on their brakes that I had just merged into. On another 2 other occasions vehicle looses power when trying to merge onto freeway. First occasion I was able to pull off to shoulder to avoid flowing traffic. Second incident there was no shoulder when merging onto freeway. Semi truck changed lanes to avoid my vehicle because I could not accelerate to speed. These incidents seem to happen with altitude and freeway driving speeds. There are no engine codes showing. This recent incident happened in the Shasta pass area.

The contact owns a 2020 Jeep Wrangler. The contact stated that the wife was driving the vehicle at 20 MPH when the vehicle's rear-wheel lock activated without any warning. The vehicle was driven home. The vehicle has not been repaired but the dealer was notified. The manufacturer was notified of the failure. The failure mileage was 24994.

Fuel line ruptured above fuel tank causing diesel fuel to pour out while driving. Driver was unaware of the issue. Rear of vehicle and spare tire were covered In diesel fuel. No impact caused this issue and could have caused a fire.

The rear camera/head unit freezes with an image of what was behind the vehicle when placed in reverse. This recently caused an issue where a group of people walked behind my Jeep while pulling out. Both myself and the group were fortunate enough that I caught one of the people walking behind my Jeep and stopped before backing into them with the backup camera still showing a clear path. This issue has been documented with Jeep and was serviced November of 2021. They replaced the unit but after a few months the new head unit started crashing and I am still having this intermittent issue where the screen shows a static image for the rear view upon placing the Jeep in reverse. No warning lamps or messages are shown. Eventually the watchdog timer times out after about a minute and the system reboots. The head unit will also crash randomly at other times while driving but this is the only instance it puts safety at risk. I would estimate it occurs 2-5% of the time I back out. Before I took the Jeep in for service I documented, in detail, each time the unit crashed and gave it to the service tech, I will send it to you as well when I locate the file. I also attached links to video showing a 2 examples at various different times this occurred, including an instance today. https://photos.app.goo.gl/pvrpoP44CjFHHfvN6 https://photos.app.goo.gl/ALu3dAw6Sarz3jzJ6

Our jeep has smelled of gas since our first week. We were told is was normal, when the tank is just filled or nearly empty, However It happpens all the time and I see that 14,000 2020 jeep wranglers were recalled. Not mine as I guess I have the larger engine. We do not smell it when the windows are up, but in good weather with windows down or top off, is it extremely disconcerting at stop lights. And we cannot park in a garage to be safe,

Steering is very loose. Large dead and makes it nearly impossible to maintain straight line in lane above 50 mph. Constant micro adjustments whenever vehicle is in motion. Jeep says nothing wrong. Something is very wrong! Recall is needed for this steering safety issue.

The contact owns a 2020 Jeep Wrangler. The contact stated while driving 75-80 MPH, the temperature gauge indicated “HOT” indicating that the engine was overheating. The contact pulled over to the emergency lane and looked up possible causes for the failure in the Owner’s Manual. The Owners Manuel instructed the contact to turn off the vehicle and wind the windows down which she performed. The Owner’s manual also suggested waiting for 15 minutes before restarting the vehicle. The contact performed the functions as instructed and started the vehicle and proceeded to drive however, the failure recurred. The contact stated that there was smoke coming from the engine and the vehicle lost all of the electronic functions. The brake and steering were the only functions that the contact was able to control. The contact engaged the hazard light and pulled over. The contact lifted the hood, rolled the windows down, and waited for the vehicle to cool down. The vehicle was towed to the local dealer where it was diagnosed. The contact was informed that the engine needed to be replaced. The vehicle was not repaired. The manufacturer was notified and informed about a refund on towing. The approximate failure mileage was 30,791.