2020 JEEP WRANGLER Complaints

When driving down the road, 55mph, I drove across some bumps in the road, and my steering, tires and the front of my Jeep started shaking violently. Couldn't hardly control it. Please help.

At approximately 58,000 miles I discovered that the rear upper coil spring mounts on my 2020 Jeep Wrangler JL Unlimited Rubicon are separating from the frame. The factory welds attaching the upper coil perches to the frame rails have cracked and torn, and the mounts are no longer securely attached. I found this condition only incidentally, while inspecting the vehicle for a separate ongoing steering issue. The coil mount separation was not what I was looking for, and I would not have found it otherwise. These mounts carry the rear vehicle load. If one separates completely, the coil spring can unseat and the rear of the vehicle can drop on that corner, causing loss of ride height, brake line displacement, and loss of vehicle control. I consider this an imminent safety hazard and I have stopped driving the vehicle. The fracture surfaces are heavily rusted, indicating the welds failed a considerable time before I discovered the condition, most likely years earlier and within the warranty period. The vehicle was taken to Jeep dealers for service and inspection multiple times during that period, and no Jeep inspection ever identified or reported this failure.

The contact owns a 2020 Jeep Wrangler. The contact stated that while driving at an undisclosed speed, the instrument panel cluster started flickering and went from blue to black. The contact associated the failure with NHTSA Campaign Number: 24V652000 (Electrical System); however, the VIN was not included in the recall. The dealer was not contacted. The vehicle was not diagnosed or repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 50,000.

The 2.0L Turbo engine suffers from premature failures. Jeep issued a TSB over leaking around the water pump, but did not notify owners. My engine overheated due to low coolant (there's no low coolant warning), and the temperature gauge proves to be unreliable. My engine suffered a head gasket failure due to overheating, while within the factory warranty period, and Jeep would not honor their warranty. My Jeep only has 33,700 miles on it, and the failure initially happened in 2024. I spent over a year going back and forth with Jeep, and in the end, they simply stopped responding. BTW, tried to upload 2 small .JPG files, but repeatedly said "upload failed".

Absolutely terrible gasoline vapor filling the inside cabin of the vehicle causing burning eyes, nausea and feeing ill. Checked for fuel, leak, leakage recall, while there was one it wasn’t including our VIN, however, after inspection and repair, it is the exact same damage as what was indicated in the recall. Looking for a full refund for repair and compensation for danger, discomfort, safety and inconvenience of vehicle not being included in the original recall. I am appalled and insulted that JEEP dealerships aren’t more more proactive in having to appeal these dangerous situations.

The contact owns a 2020 Jeep Wrangler. While the contact’s daughter was driving at an undisclosed speed, the engine temperature gauge became extremely elevated. The vehicle was towed to an independent mechanic, where it was discovered that the coolant reservoir was empty and no leak was found. The coolant reservoir was refilled, and the vehicle operated normally. The dealer was not contacted. The manufacturer was made aware of the failure. The failure mileage was approximately 64,000.

While driving on the highway, the check engine light illuminated. Approximately 5 to 10 minutes later, the battery warning light came on. Upon exiting the highway and coming to a stop at an intersection, the automatic engine Start/Stop system engaged and shut down the engine. When attempting to safely proceed, the vehicle suffered a complete electrical failure due to the 48V mild-hybrid eTorque system failing to restart the engine. The vehicle refused to crank, would not shift, and became entirely disabled and stranded in the middle of a live intersection, creating an extreme safety and collision hazard. The vehicle was towed to an authorized dealership, where technicians officially confirmed the failure. The dealer diagnosed the root cause as an internal electrical failure of the Motor Generator Unit (MGU / Belt-Driven Hybrid Starter Generator Assembly), which completely disabled the vehicle's charging and hybrid restart capabilities. The failed component is available for inspection.

These new Jeep Wrangles came from the factory with an aluminum steering box and Jeep has made 8 new steering boxes to try to fix the "wondering" steering issue but has not made any recalls. This is a safety issue because while driving down the road if you hit the smallest of bumps the Jeep will be sent into oncoming traffic in cases. They are impossible to drive on little 2 lane roads that has a lot of semi traffic as the semis naturally put low spots on the edge of the road and cause the Jeep to jolt to the right if you don't have death grip on the steering wheel. Something needs to be done to keep Jeep accountable for yet again putting these Wrangles on the road with steering issues.

While driving, the Instrument Cluster Display completely blanked out and ceased functioning. This sudden failure immediately disabled the digital speedometer, fuel gauge, engine temperature readings, oil gauge, and critical safety warning lights. In order to check my fuel levels, I have to log into an app on my phone, which is both unsafe and illegal to do while driving. The panel beeps a warning when I start my car, however I cannot see what the issue is because the display is black. Other 2020 Jeep Wranglers share this identical, well-documented cluster failure and are covered under an active recall. However, my specific VIN is currently excluded despite suffering from the exact same manufacturing defect. This issue presents an unreasonable risk to motor vehicle safety and requires immediate investigation to expand the recall scope.

The contact owns a 2020 Jeep Wrangler. The contact stated that while reversing at an undisclosed speed, the instrument cluster flickered, the infotainment screen was inoperative, the vehicle shuddered, and then stalled. No warning lights were illuminated. The vehicle was taken to a dealer, where it was initially diagnosed that the auxiliary battery needed to be replaced; upon further inspection, the dealer discovered that the vehicle was equipped with a mild hybrid battery and that the battery needed to be replaced. The vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 98,000.