2022 JEEP WRANGLER Complaints

We took the car in for the death shake and were informed there was a recall on the Jeep (25V741000). The dealership performed the maintenance work. The 12V battery was also inspected and listed as good. Since the repair, the 12V battery has shorted multiple times and finally ceased running yesterday. It has been two weeks since the dealership recall repair. While the recall specifically impacted the HV battery, the 12V is interconnected and the liklihood of that battery being impacted is high. The safety impact is the car temporarily not being able to gain power after stopping at red lights and the battery draining when stopped or turned off. The check engine light appears every time.

Vehicle communication failures. One point unable to start the vehicle. Then the wipers and all warning lights came on without being able to turn the vehile off. Had to disconnect both batteries while the wipers destroyed themselves on a dry windshield. This is also causing a Service Shifter warning light then total loss of power steering while driving down the road at any speed. This includes highway speeds. Dealer replaced power steering system with no resolution. Thousands of dollars in repair. Dealer stated they repaired wiring. Did not fix the issue. Now it is more intermittent. When the communication between modules is not functioning properly it disables the power steering even while driving. This is extremely dangerous and I can no longer trust my vehicle. There are thousands of reports and or reviews about this issue. Someone has to be held accountable. I have spent thousands and my Dealer spent weeks trying to resolve the issue. Jeep has roughly 37000 miles. This is an on going issue since October of 2025.

We have had the death wobble happen several times when driving. It was so violently shaking we tried to stop quick on a 75 mph hiway. Very dangerous and scary. This has happened many times over the last month. Had wheels realignment and new shocks. Still happening

On 3/3/2026, I brought me JEEP 4XE to the Jeep dealership in Paris, Kentucky to have the 68C recall performed. The Jeep dealership used version #7 of the 68C recall instructions to updated all software modules and then to perform a 7 mile test run to engage the electric engine and to stress the vehicle per the instructions documented in the recall instructions. Document is identified as: * High Voltage Battery * Reference: 68C/NHTSA 25V-741 * Revision: 7 * Edition: February 2026 * Details: Additional DTC added to the end of Section B. BPCM software update After picking vehicle up from dealership, I proceeded home via a state highway Route 68 (Paris Pike). The roadway is a 4 lane divided highway and has a speed limit of 55mph. I set my vehicle to HYBRID mode and then placed it on cruise control as I had done numerous times over its 25,000 miles. During the drive there were occasional rolling hills and inclines. I gauged the hills to be about a 1% grade on average but never exceeding 2% grade. During these inclines, the gasoline engine engaged and the RPM gauge on the instrument cluster registered 3000RPM. This excessive engine RPM had NEVER occurred before the 68C factory recall procedure. In all other instances of the engine engaging, the RPM would engage at 2000RPM. I contend that the the engagement of the gasoline engine on these small inclines was NOT warranted and that the excessive RPM's of 3000 is not normal and was never experienced prior to the 68C recall fix. I am submitting this information for review and documentation. Video of the instrument cluster gauge showing the RMP gauage and the display panel showing the engine and battery kW used were taken to document the process. I believe that the engagement of the gasoline engine at 3000RPM will cause excessive wear of the engine and is a direct result of one of the software updates that was used to complete the 68C recall.

Electronic Cabin Heater- EV/ Hybrid component that acts as a heating element when driving in electric mode. Common issue since the Chrysler Pacifica eHybrid plug in vehicle was manufactured. Safety: Extreme temperatures we’ve experienced would prevent heat from dispersing in the engine cabin and potential damage to engine/ EV components due to no thermal regulation. Has been reproduced and replaced. Specific to Jeep Wrangler 4xe (2021+): “Electric mode unavailable; Cabin heating/cooling” Check Engine light with DTC codes P0E80-00 and P0E15-00 present on dash. First appeared October 31st, 2025.

I have experienced what is call "death wobble" multipletimes. This is a 2022 with 30k millage. It has been to a service center three times and the drag link with ends has been replaced twice. The problem continues and only happens at highway speed. This issue has put us in what could have been a serious accident with semi-trucks on 50+ mph multiple times. I feel like this is a possible life threatening situation. I have a dash cam video of this happening and have had multiple servers centers inspect it. They have not been able to reproduce the issue, highly intermittent. To have an authorized agent look at it, I will have to pay a $229 diagnostic fee. When this death wobble occurs, there is no warning at all.

After 68C recall fix in January, the following has occurred:  -Check engine light on immediately -Replaced electric coolant heater  -Sluggish in both hybrid and electric modes -FORM indicators - constant fuel oil refresh mode  -Change oil required indicator on  -Engine revving high at low speeds  -Jumping when putting into drive / idling / shifting issues  --Replaced all 4 shocks And just yesterday on 2/27/26: Complete and total loss of power while driving on the highway. Major safety issue and a near crash.

OUR VEHICLE HAS BEEN. UNDRIVEABLE SINCE RECALL 68C/25V-741 AND HAS BEEN AT THE JEEP DEALER (FRIENDSHIP JEEP CHRYSLER IN FOREST CITY NC) SINCE 1/5/2026 WITH NO GUIDANCE AS TO WHEN TO EXPECT A FIX AND RETURN TO US. BETWEEN CAR PAYMENTS, INSURANCE PAYMENTS, AND ACCELERATED DEPRECIATION WE HAVE LOST THOUSANDS OF DOLLARS AND WE ARE NOT ABLE TO USE THE VEHICLE.

We had a recent recall completed for the hybrid battery/charging sytem where a software update was all that was required. Two weeks after a recall for the hybrid battery/charging system was completed, while traveling, we had a loss of power at 70mph in heavy traffic, and our vehicle stopped operating. We were able to limp our vehicle to the right shoulder, and was stranded on the side of I-75 south in GA, approximately 200 miles from home. The dash lights began flashing on and off, the various systems began flasing warnings and there was a burning smell of plastic. We discovered one of the electric lines attached to the fuse block in the engine compartment had melted at the terminal junction on the fuse block. This rendered us incapable of moving our vehicle. We had to call for a tow truck to have the vehicle taken to a shop. Our daughter had to come from 6 hours away to pick us up. Currently, 02/20/26, the shop that has our vehicle, is trying to get a replacement fuse block and determine if this is part of the recall that should have fixed our original recall issue.

The contact owns a 2022 Jeep Wrangler. The contact received notification of NHTSA Campaign Number: 25V741000 (Electrical System). The vehicle was taken to the dealer, and the contact was informed that the part to do the recall repair was not yet available. The contact stated that when the vehicle was started, the message "Electric Mode Temporarily Unavailable - Fuel and Oil Refresh in Progress" was displayed. The message was more prevalent during colder weather. The vehicle remained at the dealer unrepaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The failure mileage was 14,988.