2017 JEEP WRANGLER Complaints

The first time happening I was driving on the interstate going about 70 miles an hour in the dark, the car completely shut down with no warning I was able to coast then tried to restart the vehicle and it started. I was able to get off the road and to my destination. The second time this happened, it was 5am in the morning getting on the interstate going about 40 miles an hour I got to the end of the ramp and merged into traffic again no warning the car shut down. This time the vehicle would not restart. I was able to coast to the shoulder with traffic approaching on me. Had to wait for a tow in the dark by myself.

ABS system module has failed and the manufacturer has it on indefinite backorder. I read reports of some customer waiting over 400 days for this part. It compromises the effectiveness of the antilock braking system. How do they get away with this?

My ABS module is confirmed faulty resulting in an unsafe car to drive. The ABS module is extremely hard to come by, on an indefinite backorder, and I cannot get the part anywhere. Maybe people waiting over a year for the part. This is resulting in aftermarket or refurbished parts, which are risky and unsafe. I am out of a vehicle because I cannot get the part and no one wants to buy a faulty car.

During a routine maintenance visit, a pre-purchase/general inspection was performed on my 2017 Jeep Wrangler, which documented the front axle and differential housing as intact and in one piece. Subsequent to that inspection, while the vehicle was undergoing service, it was discovered that the front axle housing bracket on the driver’s side had fractured and separated from the frame mount. Upon inspection of the fractured surface, the break exhibits oxidation (rust) at the fracture point itself, indicating the crack had been forming and propagating over time rather than resulting from a single acute impact or event. This suggests a pre-existing metal fatigue or corrosion-related structural weakness in the front axle housing bracket assembly that was not visually detectable during a standard inspection prior to full separation. Given that this is a structural component connecting the front axle/differential to the vehicle frame, a full separation of this type could result in loss of vehicle control, particularly under steering or load stress, and poses a significant safety risk. The vehicle is approximately 9 years old with 90,000 miles, and this type of structural failure at this age/mileage is a concern for other owners of similar model year Wranglers. I am filing this report to make NHTSA aware of this failure mode in case it represents a broader pattern in 2017 (and potentially adjacent model year) Jeep Wranglers.

ABS MODULE HAS FAILED VIN [XXX] No ABS and no cruise control The ABS module is on back order and cannot be purchased by OEM. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

Oil cooler split due to warming up and cooling down in winter and being made of plastic All brake calipers needed to be replaced on it too

The contact owns a 2017 Jeep Wrangler. The contact stated that while traveling at 60 MPH, the vehicle struck a deer. The airbags failed to deploy upon impact. No injuries were reported. No police report was filed. The vehicle remained operable and was driven to the residence. Two days later, the airbag warning light illuminated. The manufacturer was notified and confirmed there were no open recalls or active warranties for the vehicle. The contact was then referred to the NHTSA Hotline to file a report. The vehicle had not been repaired. The failure mileage was approximately 140,000.

Front brake caliper became loose, moved away from the rotor, resulted in the caliper grinding against the inner wheel. Inspection by mechanic revealed missing caliper mounting bolts on both driver and passenger side of brakes. Front caliper mounting bolts were replaced with OEM-spec hardware, torqued to spec, with blue Loctite added to threads of fasteners. The mechanic noted many well-documented failures of the same nature on Jeep JK, JL, and Gladiator models, although no formal recalls have been issued.

The battery terminals will stop tightening, which made me think it was fully tightened. I wiggled them from side-to-side and they didn't move. As I was driving, the vehicle died, which almost caused an accident because the steering wheel locked. I was able to get the vehicle to a safe stop and hook up a jump pack to it. I then discovered that my negative battery terminal wasn't even on the battery post. It slipped off when lifted UP but didn't move AT ALL when wiggled side-to-side. I am unable to find the proper OEM replacement battery terminals at this time.

My 2017 Jeep Wrangler experienced repeated brake system failures beginning shortly after purchase. After extensive brake repairs, the vehicle was ultimately diagnosed with a failed ABS control module. The vehicle is unsafe to operate due to loss of ABS/stability safety systems. Jeep/Stellantis has the required OEM module on national backorder with no repair timeline (some other jeep owner reports say it has been on backorder for up to 18 months), reportedly under engineering review. Dealerships and mechanics indicate this issue is widespread among Jeep Wranglers. The inability to obtain a safety-critical brake component leaves the vehicle effectively unusable and unable to be safely repaired (has been undriveable since Feb 11 2026).