2013 MERCEDES-BENZ C300 Complaints

Driving my 300 down the highway at around 70MPH and after lightly pressing the break, the car surved into right and left lane. I could have gotten into an accident, but luckily no other car was on the road. Taking my car to the mechanic it was discovered that My 2013 C300 has a rotted subframe, this was not caused by any damage but due to the part not being protected from rust. Rust caused the subframe to rot from the inside out. Many C300 have reported this issue, and the large number of failures on this subframe across my C300 and multiple models is concerning. This is a gross failure of a major safety component that can cause serious injury or death. My research showed this part has been recalled in Canada; MBUSA feels the need to wait to do so until a serious injury or death has occurred. The defective subframe is known and the new part’s design has been amended to take into account this rust issue. MBUSA’s decision exhibits a lack of accountability for a defective part and this issue needs to be promptly addressed for the safety of its customers.

THE REAR SUBFRAME ON THE CAR IS COMPLETELY RUSTED. I GET AN OIL CHANGE AND A INSPECTION OF THE CAR DONE AT THE DEALER EACH YEAR. NOBODY MENTIONED TO ME THAT THE REAR SUBFRAME IS RUSTED AND IS ABOUT TO CRACK AND FALL APART. WAS DRIVING HOME FROM WORK WHEN I SUDDENLY HAD TO STOP AND THE WHOLE CAR SHIFTED TO THE RIGHT ALMOST CAUSING ME TO CRASH. DROVE HOME AND NOTICED A NOISE EVERY TIME I HIT THE BRAKES. THE NEXT DAY TOOK IT TO A MECHANIC AND HE SHOWED ME THAT THE SUBFRAME CRACKED AND FELL APART. I KNOW THIS IS A BIG ISSUE IN EUROPE AND THE DEALERS CHANGE IT FREE OF CHARGE SINCE IT IS ON A RECALL, BUT NOTHING IN THE USA AFTER SEVERAL COMPLAINTS FROM DRIVERS. DO SOMETHING ABOUT THIS!

The contact owns a 2013 Mercedes-Benz C300. The contact stated while driving approximately 30 MPH, the steering wheel started shaking. The contact then depressed the brake pedal causing the vehicle to drift. There were no warning lights illuminated. The contact took the vehicle to the dealer who diagnosed that the rear-subframe was severely rusted causing a control link to fracture. The contact was informed that the control link and subframe needed to be replaced on the passenger’s side of the vehicle. The vehicle had not been repaired due to the parts being on backorder. The manufacturer was not made aware of the failure. The approximate failure mileage was 120,000.

I had noticed that my car was starting to pull to the side when braking. I took it in to my authorized dealer, where I always have it serviced and maintained, and I was told that the rear sub-frame bracket was broken off at the left rear lower control arm attachment point. The rear sub-frame and left rear lower control arm needs to be replaced. I was told that the car was absolutely not safe to drive. I have always taken great care to maintain the vehicle, and it has always been stored in a garage. There were no warning signs prior to the failure, and I was very surprised to hear that the sub-frame had rusted out since there is no rust anywhere else on the vehicle.

The left rear subframe is torn and severely rusted. The left rear arm also needs to be replaced because it is essentially not connected to anything which makes the car not safe to drive. I took the car to an independent shop and was told not to drive the car any longer. I had to have the car towed to my home. I was made aware that this is a common issue In Mercedes C300 and Mercedes US has refused to issue a recall although in Canada a recall has been issued on this particular part. I was driving on the highway with my 1 yr old in the backseat when my car started to pull side to side. The car felt out of control. There were no warning indicators about this issue so I wasn’t sure what was going on. Im happy I followed my instincts and had the car looked at. I am now faced with purchasing a new car or having the car repaired for several thousand dollars. I have had the car for six years without issue and I’m told that this is a manufacturer defect.

The contact owns a 2013 Mercedes-Benz C300. The contact stated while his wife was driving approximately 30 mph, she was depressing the brake pedal and the rear side of the vehicle shifted to the left independently, causing to impact with another vehicle. The contact stated no warning light was illuminated. The air bags did not deploy. The contact stated no one was injured nor sought medical attention. A police report was filed. The vehicle was drivable and the driver was able to continue driving to her destination. The contact took the vehicle to an independent mechanic and was informed the sub frame was corroded. The vehicle was not repaired. The contact called the local dealer and made them aware of the failure. The vehicle was not repaired. The manufacturer had not been informed of the failure. The failure mileage was approximately 50,000.

I noticed my Mercedes 2013 C300 (approx 89,000 miles) was acting peculiar when braking, it basically fishtailed like i was on ice, especially at a high speed on the interstate. It was very scary. It was also making clunking noises and did not handle on curves very well. Brought it to a local garage as the nearest dealer is over an hour away. Found out the rear subframe is broken on the rear passenger side and the other side very close to breaking. Not only that, but when I called a garage that specializes in German cars, he immediately guessed it was a C Class Mercedes, and when I googled it, this issue came up repeatedly. How this has not been addressed by Mercedes is beyond me, will it take a horrendous crash? Because I was almost a statistic. No warning lamps or messages. This design flaw needs addressed immediately. And now I have no vehicle as it is UNSAFE to drive and will cost me around $3,000 to fix IF they can get the part. Sent an email to Mercedes Benz, they advised recalls and service campaigns are VIN specific and to contact NHTSA. And the email closed with "Best wishes for safe and pleasant driving."

So I took my car to get new tires and the tech told me that my rear subfram was rusted and cracked ,unsafe to drive . I called mercedes and they asked to take it to the dealership and get a quote. I did this and there response was to do nothing .this issue has been recalled in Germany and also Canada. But nothing done in United States. This is a serious safety issue .let's say I never got my tires and never found out and was traveling 70mph down the freeway and had to hit the brakes hard for whatever reason and this part fails and breaks. Everyone in my car and whoever else my car collides into life's would most definitely be in danger

The contact owns a 2013 Mercedes-Benz C300. The contact stated while driving at an undisclosed speed, the steering wheel failed to immediately respond while turning the steering wheel. After stopping the vehicle and attempting to reverse, it was discovered that the front wheels would no longer turn while turning the steering wheel in either direction. The vehicle was later towed to the residence. The cause of the failure was not yet determined. The local dealer and manufacturer were notified and the contact was informed that the VIN was not included in the NHTSA Campaign Number: 17V252000 (Steering). The contact indicated that the vehicle had experienced the failure listed in the recall. The failure mileage was 95,000.

The driver side suspension mount to the rear subframe has rusted through. While applying the brakes the car pulled radically to the left almost causing me to lose control. This is a known issue from what I can determine but Mercedes has refused to issue a recall. The car cannot be driven until this is fixed.