2001 MITSUBISHI ECLIPSE Complaints

TL*THE CONTACT OWNS A 2001 MITSUBISHI ECLIPSE. WHILE DRIVING AT AN UNKNOWN SPEED, THE CONTACT WAS UNABLE TO SHIFT THE VEHICLE. THE VEHICLE WENT INTO THE NEUTRAL POSITION. SHE HAD THE VEHICLE TOWED TO HER RESIDENCE. THE DEALER STATED THAT THE AUTOMATIC TRANSMISSION NEEDED TO BE REPLACED. THE REPLACEMENT WAS MADE APPROXIMATELY 30 DAYS BEFORE THE LAST FAILURE, THE CONTACT WAS INFORMED THAT THE VALVE WAS STICKING IN THE TRANSMISSION. THE DEALER PERFORMED A FLUSH, WHICH CORRECTED THE FAILURE FOR APPROXIMATELY 800 MILES. THE PURCHASE DATE WAS UNKNOWN. THE CURRENT MILEAGE WAS 71,555 AND FAILURE MILEAGE WAS 71,498. UPDATED 3/18/08 *CN UPDATED 03/18/08 *TR

ENGINE 20 AMP FUSE POPS AFTER DRIVING CAR FOR A PERIOD OF TIME THEN CUTTING OFF AND RESTARTED. IF CAR IS DRIVEN CONTINUOUSLY DOES NOT BLOW FUSE. ONLY AFTER STOPPING AND NOT LETTING ENGINE COOL DOWN DOES IT BLOW FUSES. *TR

I HAVE A 2001 ECLIPSE GT, AND I HAVE BEEN HAVING PROBLEMS WITH THE HEADLIGHTS GOING ON AND OFF UNTIL ONE DAY THEY JUST STOPPED WORKING. IT KEPT SMELLING LIKE SOMETHING WAS BURNING AND IT HAD BEEN THE HEADLIGHT HARNESSES. THE DEALERSHIP I PURCHASED THE VEHICLE FROM CLOSED DOWN SO I BROUGHT IT TO KEY MITSUBISHI OF MILFORD AND THEY SAID THAT THE HEADLIGHT HARNESSES MELTED. THEY IN TURN TOLD ME THAT IT WOULD COST CLOSE TO $300.00 TO FIX. I DIDN'T DO ANYTHING TO MAKE THE WIRES MELT AND IT SHOULD BE MITSUBISHI'S RESPONSIBILITY TO FIX THE PROBLEM. THEY SAID THAT I SHOULD TAKE IT TO CRABTREE IN MILFORD AND SEE IF THEY WOULD DO IT. THEY DID NOT WANT TO COVER THE DEFECT EITHER. I HAVE NO HEADLIGHTS ON THE CAR AND THIS CAUSES A HUGE SAFETY RISK. I NEED TO KNOW WHAT I HAVE TO DO IN ORDER TO GET THE MANUFACTURER TO FIX THIS DEFECT. THIS IS MITSUBISHI'S FAULT AND MISTAKE. MANY OTHER PEOPLE HAVE HAD THE SAME PROBLEM AND IT IS NOT SOMETHING CHEAP TO FIX. I AM CURRENTLY USING A RELATIVES LONER CAR TO GET AROUND BECAUSE I HAVE NO WAY TO PAY FOR THIS. PLEASE ADVISE ON WHAT TO DO. THANKS *TR

ON MY 2001 ECLIPSE SPYDER, HEADLIGHTS BEGAN TO GO OUT, BUT MOVING WIRE CONNECTION ON BACK OF HEADLAMPS WOULD CORRECT THE PROBLEM MOMENTARILY. THE PROBLEM OCCURRED MORE AND MORE FREQUENTLY, AND ONE HEADLAMP STOPPED FUNCTIONING ALTOGETHER, AND NOW BOTH WENT OUT ON ME WHILE DRIVING ALMOST GETTING INTO A ACCIDENT. WHEN I CHECKED THE PROBLEM THE HEADLIGHT BOXES THAT CONNECT TO THE WIRES WERE MELTED AND EVENTUALLY BURNED OFF AND BROKE. *TR

VEHICLE STATED CLEARLY ON WINDOW STICKER THAT VEHICLE INCLUDED A STAINLESS STEEL EXHAUST SYSTEM. THE ENTIRE SYSTEM IS NOW RUSTING. *TR

BODY PAINT ON HOOD AND TRUNK ARE DETERIORATING TO THE POINT THAT THERE ARE HUGE WHITE PATCHES SHOWING THROUGH THE BLACK PAINT. THE VEHICLE HAS BEEN WASHED AND WAXED AT LEAST ONCE A MONTH FOR THE PAST 6 YEARS. THE PAINT WAS OBVIOUSLY DEFECTIVE WHEN IT WAS APPLIED TO THE VEHICLE IN THE FACTORY. I CONTACTED MITSUBISHI AND THEY DECLINED TO TAKE ACTION. *TR

I. THE EVENTS LEADING UP TO THE FAILURE ARE: 1. I WASHED AND WAXED MY CAR ON A REGULAR BASIS. 2. I DROVE MY CAR ON THE HIGHWAY AT A SPEED OF APPROXIMATELY 70 MILES PER HOUR. *TR II. FAILURE AND ITS CONSEQUENCES: 1. THE PASSENGER SIDE MOLDING ON THE FRONT WINDSHIELD OFFICIALLY CALLED THE A PILLAR SEPARATED FORM THE BOLTS WHICH HELD IT TO THE FRAME OF THE CAR AND FLEW OFF STRIKING AND DENTING THE PASSENGER DOOR. 2. THE BOLDS THAT HELD THIS MOLDING TO THE FRAME ARE STILL ATTACHED TO THE CAR SHOWING THAT THERE WAS A BREAKDOWN OF THE ADHESIVE MATERIAL THAT ORIGINALLY HELD THIS PART TO THE BOLTS. III. WHAT WAS DONE TO CORRECT THE FAILURE? NOTHING 1. AFTER GOING TO THE DEALER, THEY CONTACTED THE FACTORY REPRESENTATIVE, NOTHING WAS DONE. 2. AFTER SPEAKING TO A CUSTOMER SERVICE REPRESENTATIVE FROM MITSUBISHI MOTORS OF NORTH AMERICA, NOTHING WAS DONE. 3. AFTER WRITING TO THE PRESIDENT OF MITSUBISHI MOTORS OF NORTH AMERICA ON SEPTEMBER 24, 2007, I HEARD NOTHING. 4. ON OCTOBER 8, 2007, I SENT A SECOND LETTER TO THE PRESIDENT OF MITSUBISHI MOTORS OF NORTH AMERICA AND MEMBERS OF THE BOARD OF DIRECTORS. I COINCIDENTALLY RECEIVED A CALL FROM THE CUSTOMER SERVICE REPRESENTATIVE FROM MITSUBISHI MOTORS OF NORTH AMERICA THE SAME DAY WHO SAID THAT MY SITUATION HAD BEEN REVIEWED AND THE DECISION WAS THE SAME. TO DO NOTHING. 5. I HAVE WRITTEN TO THE PRESIDENT AGAIN ON OCTOBER 10, 2007. AS OF TODAY I HAVE NOT HEARD FROM ANYONE. 6. TO THIS DAY NO ONE, INCLUDING THE FACTORY REPRESENTATIVE, HAS INSPECTED MY VEHICLE TO SEE WHAT CAUSED THIS FAILURE.

I HAVE A 2001 MITS ECLIPSE SPYDER CONVERTIBLE. I HAVE HAD PROBLEMS WITH LEAKS SINCE I BOUGHT THE CAR IN 2005. HAD IT FIXED ONCE NOW THE CAR LEAKS FROM ALL OVER INTO MY FLOOR BOARDS FRONT AND BACK. MY RADIO HAS MALFUNCTIONED. THE CAR IS BECOMING UNDRIVABLE DUE TO THE FLOODING. I HAVE INSURANCE WHICH WILL NOT COVER THIS AND MITSUBISHI WILL NOT FIX IT WITHOUT PAYING MORE THAN THE CAR IS OWED. *JB

ONE AFTERNOON I GOT INTO MY CAR AND STARTED IT UP, WHEN SUDDENLY I SAW SMOKE ARISE FROM THE FRONT OF MY ENGINE AND SMELLED A SWEET SMELL, BUT THE SMOKE AND SMELL SOON DISSIPATED, HOWEVER I THEN NOTICED THAT MY DRIVER'S SIDE HEADLIGHT WAS GOING DIM AND SHORTLY THEREAFTER I HAD NO HEADLIGHTS! I AM CURRENTLY WITHOUT HEADLIGHTS MAKING IT DIFFICULT TO GO TO AND FROM WORK. WE HAVE NOT TRIED TO REPAIR THIS OURSELVES BECAUSE WE DID NOT KNOW WHAT THE PROBLEM WAS. WE CHECKED THE FUSES AND THE BULBS WHICH ALL SEEM TO BE NORMAL. ALL THE OLD PARTS ARE STILL ON THE CAR, HOWEVER, THE CONNECTOR TO THE DRIVER'S SIDE HEADLIGHT HAD PARTIALLY MELTED. *TR

MY WIFE AND I WERE DRIVING ON THE HIGHWAY AND THE RIGHT MOLDING ON THE FRONT WINDOW FLEW OFF THE CAR.(IT IS CALLED THE A PILLAR.) IT SHOT BACK, BANGING AGAINST THE SIDE OF THE CAR DENTED THE DOOR. WHEN WE GOT TO OUR DESTINATION I LOOKED AND THE BOLTS WERE STILL IN THE FRAME, BUT THE MOLDING WAS GONE. THE NEXT DAY I WENT TO THE DEALER (COCONUT CREEK MITSUBISHI IN COCONUT CREEK, FLORIDA) TO ASK IF THIS WAS NORMAL. THEY OF COURSE SAID NO. I ASKED WHAT THEY WOULD DO TO GET IT REPLACED. THEIR FIRST RESPONSE WAS TO SELL ME A NEW ONE AT A COST OF $163.70 PLUS TAX, BUT THEY WOULD INSTALL IT FOR FREE BECAUSE THEY ADMITTED THAT THIS SHOULD NOT HAPPEN. A WEEK LATER I SPOKE TO THE SERVICE MANAGER MICHAEL SEE AT COCONUT CREEK MITSUBISHI AND FIND OUT WHAT THE FACTORY REP TOLD HIM. MICHAEL TOLD ME THAT JOHN HACKWORTH THE FACTORY REP SAID I'M NOT GOING TO DO ANYTHING. THE FACTORY REP NEVER LOOKED AT THE CAR OR INSPECTED THE BOLTS TO SEE WHY THE MOLDING FLEW OFF. HE HEARD THE AGE OF THE CAR AND THE MILEAGE AND THAT WAS THE BASIS FOR HIS FINAL DECISION. THE STORY THAT MICHAEL SEE AND THE ASSISTANT MANAGER OF THE DEALERSHIP STANLY ANDERS KEEP TELLING ME IS THAT THE CAR IS SIX YEARS OLD AND HAS 95,000 MILES ON IT AND THINGS BREAK. FIRST MR. ANDERS SAID THAT IT WAS NORMAL WEAR AND TEAR. THE FACT THAT THE FACTORY REP NEVER CALLED TO LOOK AT THE VEHICLE AND INSPECT THE BOLTS TO SEE WHAT HAPPENED, IN MY OPINION IS UNACCEPTABLE. THE FACT THAT MITSUBISHI MOTORS OF NORTH AMERICA HAS NO INFLUENCE OVER THE DECISIONS OF A FACTORY REP IS ABSURD. IN ADDITION, THE DASHBOARD IS SLOWLY FALLING APART. THE DASHBOARD HAD APPROXIMATELY SEVEN CRACKS IN IT WHEN I PURCHASED THE CAR. THE DEALER SAID THAT THIS IS NORMAL ON CONVERTIBLES AND THAT THEY WILL NOT REPLACE IT. YOUR CAR, YOUR PROBLEM WE DID MORE THEN ENOUGH FOR A USED CAR. TODAY THERE ARE ABOUT ELEVEN OR TWELVE CRACKS AND I SUPPOSE THAT ONE DAY IT WILL JUST FALL APART COMPLETELY, BUT ACCORDING TO THE DEALER, THAT'S NORMAL. *TR