2004 NISSAN ALTIMA Complaints

2004 NISSAN ALTIMA. CONSUMER STATES VEHICLE STALLED WHILE DRIVING*TGW THE CONSUMER STATED THERE IS STILL A MAJOR PROBLEM REGARDING THE RECALL FOR THE CRANK ANGLE SENSOR AND THE REPROGRAMMING OF THE ECM. THE CONSUMER STATED THE CRANK SENSOR HAD TO BE REPLACED FOR THE SECOND TIME AND THE CHECK ENGINE LIGHT HAD ILLUMINATED ON SIX SEPARATE OCCASIONS. THE RADIATOR WAS CRACKED AND WAS LEAKING COOLANT. THE PASSENGER SIDE MIRROR WAS LOOSE, THE SUN ROOF HAD A RATTLE AND THE DRIVERS SIDE WINDOW WOULD GO UP, BUT AT TIMES IT WOULD COME BACK DOWN ON ITS OWN. THE DEALER REPLACED THE REGULATOR MOTOR. ALSO, THE ALTERNATOR WAS REPLACED. *JB

MY 04 NISSAN ALTIMA V6 ONE DAY BEGAN TO BUCK WHILE ON THE HIGHWAY. I MADE IT HOME, THEN WHEN I WENT TO START IT WOULDN'T. BASICALLY EVER SINCE THAT DAY IT'S BEEN AN ON GOING PROBLEM W/ NOT STARTING, SHUTTING OFF UNEXPECTEDLY WHILE DRIVING AND COMPLETELY LOCKING UP MAKING IT VERY DIFFICULT TO PULL OVER AND DANGEROUS. AT ONE POINT IT WOULD NOT ACCELERATE. I AM THE MOTHER OF AN INFANT SO UNTIL I FIND A RESOLUTION I NEED TO BORROW CARS TO TRAVEL WITH HIM. I HAVE REPLACED THE CAMSHAFT SENSOR AND THE THROTTLE POSITION SENSOR WHICH WERE THE CODES THAT CAME UP AND STILL I CANNOT DRIVE MY CAR. I THEN RESEARCHED MY MAKE/MODEL/YEAR AND FOUND I WAS NOT ALONE. MANY OTHERS HAVE ENCOUNTERED THE SAME ISSUES AND HAVE YET TO REACH A RESOLUTION AND APPARENTLY NISSAN IS NOT DECLARING A RECALL ON 2004'S BUT HAVE ON "02" AND "03" WHICH HAD THE SAME EXACT ISSUES. I DO NOT WANT TO CONTINUE TO BUY PARTS AND TRY TO FIX SOMETHING THAT IS DEFECTIVE AS I READ MANY OTHERS HAVE DONE. I PLAN ON CONTACTING THE BBB AND TAKING IT FROM THERE BECAUSE I DON'T KNOW WHAT TO DO. SO HERE I AM MAKING PAYMENTS ON A VEHICLE THAT IS EXTREMELY UNSAFE FOR MY CHILD AND I AND NO ANSWERS ON WHY THESE CARS ARE MALFUNCTIONING AND CONTINUING TO READ CAMSHAFT...ETC EVEN AFTER BEING REPLACED???? PLEASE HELP. *TR

2004 NISSAN ALTIMA 5 SPD MANUAL CLUTCH. LAST WEDNESDAY I WAS DRIVING MY CAR AND NOTICED THE CLUTCH WAS GETTING LOWER AND LOWER TO THE FLOOR. I MADE IT TO MY DESTINATION BUT WHEN I RETURNED TO MY CAR TO LEAVE, I PRESSED ON THE CLUTCH AND IT JUST STAY DOWN ON THE FLOOR. AFTER THE CAR COOL IT SEEMED TO WORK PROPERLY THE NEXT DAY BUT NOW IT IS HARD TO GO INTO 1ST GEAR AND THERE IS A GRINDING NOISE TO GO INTO 2ND ALL OTHER GEARS SEEM OKAY. CURRENTLY I HAVE ONLY SEARCHED ONLINE TO SEE IF ANYONE ELSE WAS HAVING THIS PROBLEM AND THERE APPEARS TO BE MANY. I DO NOT HAVE THOUSANDS OF DOLLARS FOR A MECHANIC BILL, ACTUALLY TODAY I ONLY HAVE 15.00 TO MY NAME. THIS IS MY ONLY MEANS TO GET TO MY JOB THAT PAYS HALF MY BILLS AND AT THIS TIME I DON'T KNOW WHAT TO DO. *TR

CAR SHUT OFF WHILE DRIVING. CAR ALSO DOESN'T START UP RIGHT AWAY. TRIED TO BRING IT TO NISSAN BUT THEY SAID MY VIN# WASN'T INCLUDED IN THE WELL KNOWN RECALL (CAMSHAFT SENSOR). BS IF YOU ASK ME! THEY'RE GOING TO PUT PEOPLES LIVES AT RISK. SO I WENT TO ADVANCED AUTO PARTS STORE AND GOT THE CODE READ AND IT WAS A P-03040 WHICH WAS A CAMSHAFT POSITION SENSOR MALFUNCTION. I GOOGLED A BIT AND FOUND OUT THERE'S PLENTY OF PEOPLE OUT THERE WITH THIS PROBLEM. I EVEN CALLED NISSAN AND THEY DIDN'T WANT TO DO NOTHING ABOUT IT. OUTRAGEOUS DIAGNOSTIC FEE ALSO. $105 JUST TO PLUG IN A OBD READER. YOU CAN BUY YOUR OWN OBD READER FOR THAT PRICE. OR JUST GO TO YOUR LOCAL AUTO STORE AND GET IT CHECKED FOR FREE!!! NOT HAPPY. NISSAN ALSO SOUNDED LIKE THEY DIDN'T WANT TO DEAL WITH ME SINCE I DON'T BRING MY CAR TO NISSAN FOR OIL CHANGES/REPAIRS. *TR

2004 NISSAN ALTIMA POWER VALVE SCREW MISSING CAUSING ENGINE TO MISFIRE, STALLING AND SHUTTING OFF IN THE MIDDLE OF TRAFFIC, VERY SCARY SINCE THE WHOLE FAMILY WAS IN CAR, ENGINE HARD TO START. *TR

TL*THE CONTACT OWNS A 2004 NISSAN ALTIMA. WHILE DRIVING AT 5 MPH, THE VEHICLE SUDDENLY LOST POWER. THE CONTACT WAS ABLE TO PULL OVER AND RESTART THE VEHICLE. PRIOR TO THE FAILURE, THERE WAS A RECALL 06V242000 FOR THE ECM SENSOR (ENGINE AND ENGINE COOLING). THE CONTACT CALLED THE DEALERSHIP AND THE DEALER STATED THAT THE SENSOR NEEDED TO BE REPLACED. THE VEHICLE HAD NOT BEEN REPAIRED AT THE TIME OF THE COMPLAINT. THE FAILURE MILEAGE WAS APPROXIMATELY 60,000. THE CURRENT MILEAGE WAS APPROXIMATELY 105,000.

ON MY 2004 NISSAN ALTIMA 2.5, DUE TO SOME ONE CRASHING INTO ME , THE PASSENGER AIRBAG DEPLOYED THEN CAUGHT ON FIRE. *TR

A DEFECTIVE STEERING UNIVERSAL ASSEMBLY. OCCURRED SUDDENLY. I COULD BARELY STEER THE CAR. VERY DANGEROUS . THANK GOODNESS IT HAPPENED IN MY NEIGHBORHOOD AND NOT ON THE HIGHWAY.58,000 MILES ON THE CAR. I WROTE NISSAN CANADA ABOUT THE PROBLEM AND THEY CONTACTED ME BY TELEPHONE. I WAS TOLD THAT NISSAN DIDN'T CONSIDER IT A PROBLEM, THE REPAIR COST ME $539.00. IT'S NOT THE REPAIR COST THAT IS IMPORTANT, IT'S THE DANGER TO THE PUBLIC; NOT ONLY TO THE DRIVER OF THE VEHICLE, BUT TO THIRD PARTIES. I HAVE SINCE L,EARNED OF THE SAME PROBLEM WITH A 2005 NISSAN ALTIMA. IT IS JUST ABOUT IMPOSSIBLE TO STEER THE VEHICLE WHEN THE STEERING WHEEL ASSEMBLY IS DEFECTIVE. *TR

PROBLEM VEHICLE IS 2004 NISSAN ALTIMA WITH 80,000 MILES. NOTICED WHEN PULLING OUT OF DRIVEWAY AFTER CAR HAD SIT OVERNIGHT IN GARAGE THAT STEERING WHEEL WAS BINDING WHEN I TRIED TO TURN THE VEHICLE. DURING THE COURSE OF THE DRIVE THE STEERING WHEEL WOULD BIND BOTH DURING TURNING AND WHEN RETURNING TO STRAIGHT. THE BINDING CAUSED EXTRA EFFORT (REQUIRING BOTH HANDS) TO TURN THE STEERING WHEEL AND ALSO REQUIRED EXTRA EFFORT TO RETURN THE WHEELS TO STRAIGHT BECAUSE THE BINDING PREVENTED THE WHEELS FROM RETURNING TO STRAIGHT ON THEIR OWN. THE BINDING WAS BAD ENOUGH THAT IT COULD HAVE CAUSED AN ACCIDENT BECAUSE OF THE EFFORT REQUIRED TO TURN THE WHEEL AND THE DIFFICULTY IN STRAIGHTENING THE WHEELS TO STOP TURNING. THE BINDING FORCE WAS INTERMITTENT AND SEEMED TO BE RELATED TO CERTAIN PLACES IN THE ORIENTATION OF THE WHEEL. AFTER RESEARCH ON THE INTERNET I DISCOVERED THAT MANY OTHER PEOPLE HAVE HAD THIS PROBLEM WITH SIMILAR YEAR AND MODEL OF CAR AND THEY ALL REFERENCED THE LOWER UNIVERSAL JOINT IN THE STEERING LINKAGE AS THE PROBLEM PART (NISSAN PART 48080-8J000). WHEN I REMOVED THE PART IT WAS RUSTY AND EXTREMELY TIGHT (I WILL HOLD ONTO THE OLD PART IN CASE ANYONE WANTS TO SEE IT OR USE IT AS EVIDENCE). THE REPLACEMENT PART WAS BACK ORDERED BY NISSAN WHEN I ORDERED IT FROM THE DEALER. THE DEALER SAID THAT THEY HAVE BEEN SELLING LOTS OF THIS PART AND THE PART HAS BEEN TAKING A FEW DAYS TO TWO WEEKS TO ARRIVE DUE TO HIGH DEMAND. CLEARLY THERE IS A PROBLEM WITH THE DESIGN OF THIS PART. WHEN I FINALLY GOT THE NEW PART (48080-8J000 LOWER STEERING U-JOINT) AND INSTALLED IT THE STEERING WORKED SMOOTHLY AGAIN. *TR

JUST AS DOZENS OTHERS HAVE ALREADY FILED AS COMPLAINTS I HAVE HAD SEVERAL ISSUES WITH THE CAMSHAFT/CRANK SHAFT POSITION SENSOR. ORIGINALLY THIS SENSOR WENT BAD IN JUNE, 2008 AT 49,000 MILES. I HAD THE SENSOR REPLACED AND THE ECM REPROGRAMMED ACCORDING RECALL 06V242000. I CONTACTED NISSAN NORTH AMERICA AND FILED A COMPLAINT AND AFTER SOME BACK AND FORTH THEY AGREED TO COVER THE COST OF THE REPAIR (APPROX. $500). ON MARCH 3RD, 2010 AT 70,885 THE CAR WOULD NOT START SO I HAD IT TOWED TO A CERTIFIED REPAIR SHOP WHO DIAGNOSED IT WITH A BAD CAMSHAFT POSITION SENSOR AGAIN. THE REPAIR COST ME $265. CLEARLY THERE IS A CONSISTENT PROBLEM WITH THESE SENSORS AND REPROGRAMMING THE ECM IS NOT A PROPER FIX. APPARENTLY EVEN REPLACING THE SENSOR ONCE (BY A NISSAN DEALER) DOES NOT FIX THE PROBLEM. NISSAN NEEDS TO STEP UP AND TAKE RESPONSIBILITY FOR THEIR POOR CHOICE IN COMPONENTS AND PROVIDE A PERMANENT SOLUTION AND COMPENSATION FOR AFFECTED CONSUMERS. I WILL BE CONTACTING NISSAN NORTH AMERICA AGAIN. *TR