2006 NISSAN ALTIMA Complaints

INSPECTION ON AUGUST 5, 2013 REVEALED RUSTED HOLES IN 2006 NISSAN ALTIMA DRIVER AND PASSENGER SIDE FLOOR BOARDS. THIS IS EXTREMELY UNACCEPTABLE FOR A 7 YEAR OLD VEHICLE. I HAVE BEEN A NISSAN BRAND FAMILY SINCE 1989 AND HAVE TAKEN EXTRA MAINTENANCE MEASURES TO GET MY VEHICLES PAST 200,000. AFTER RESEARCHING THE WEB, MANY FORUMS SHOW NISSAN IS REFUSING TO ADDRESS THIS MAJOR COMMON PROBLEM. I WILL CONSIDER REPAIRING MY VEHICLE AND TRADING IN TO ANOTHER MANUFACTURER. *TR

HANDLING OF THE NISSAN ALTIMA CRANK SHAFT SENSOR RECALL IS COMPLETELY UNACCEPTABLE. NO NOTICE OF THE RECALL WAS EVER SENT, WHICH MEANT WE FOUND OUT THE HARD WAY: WHEN THE CAR STALLED OUT IN THE MIDDLE OF A MAJOR HIGHWAY, WITHOUT WARNING (EXACTLY AS DESCRIBED IN THE RECALL THAT WASN'T SENT) I ONLY FOUND THE RECALL AFTER A LOCAL NON-NISSAN MECHANIC TOLD ME ABOUT IT, AND THEN WHEN I BROUGHT IT INTO THE DEALER, THEY DIDN'T UNDERSTAND THE NATURE OF THE RECALL. PLEASE HELP! *TR

TL* THE CONTACT OWNS A 2006 NISSAN ALTIMA. THE CONTACT STATED THAT THE PASSENGER'S SIDE FLOOR BOARD WAS CORRODED. THE VEHICLE WAS NOT REPAIRED AND THE MANUFACTURER WAS NOTIFIED. THE APPROXIMATE FAILURE MILEAGE WAS 52,000.

PROBLEM BEGAN WITH ENGINE JERKING AT HIGH SPEEDS. THEN CHECK ENGINE LIGHT CAME ON. CODES INDICATED CRANK SHAFT SENSOR AND CAM SHAFT SENSORS. REPLACED BOTH. WITHIN 6 MONTHS PROBLEM STARTED ALL OVER AGAIN WITH THE SAME CODES AND THIS TIME THE CAR STARTED LOSING POWER WHILE DRIVING AT LOW SPEEDS AND SOMETIMES DOESN'T START. ALSO STILL HAVING THE ENGINE JERKING AT HIGH SPEEDS. VEHICLE JUST DOESN'T SEEM TO HAVE MUCH POWER AT ALL. EVEN THOUGH THERE HAS BEEN A RECALL FOR THESE VERY THINGS, APPARENTLY OUR VIN # INDICATES OUR CAR IS NOT PART OF THE RECALL EVEN THOUGH IT WAS MANUFACTURED DURING THE DATES SPECIFIED ON THE RECALL LETTER. OUR 16 YEAR OLD SON DRIVES THIS VEHICLE AND I AM NOW VERY SCARED TO LET HIM DRIVE IT. WE ARE HAVING TO PAY FOR THESE REPAIRS OUT OF POCKET. NISSAN BETTER BE VERY THANKFUL THAT NOTHING TRAGIC HAS OCCURRED DUE TO THIS. IF IT HAD, A MAJOR LAWSUIT WOULD BE IN ORDER. *TR

THE VEHICLE HAS BEEN VERY WELL MAINTAINED AND I NOTICED TODAY THAT THE FLOORBOARDS ON BOTH SIDES IN THE FRONT ARE RUSTED RIGHT THROUGH. BY SEARCHING THE INTERNET, I SEE THAT THIS SEEMS TO BE A RECURRING ISSUE FOR OTHER CONSUMERS. *TR

FOUND THAT THE PASSENGER SIDE FLOORBOARD IS RUSTING OUT ON MY WIFE'S 2006 NISSAN ALTIMA. THERE WAS A MUSTY SMELL BUILDUP IN HER CAR. ON INSPECTION, FOUND THAT THE PASSENGER SIDE CARPETING WAS DAMP. THE FLOORBOARD HAD 2 LARGE SPOTS WERE IT WAS STARTING TO RUST AWAY. WE HAVE ALWAYS KEPT THE CAR WASHED AND CLEANED THROUGHOUT OUR OWNERSHIP OF THIS VEHICLE. WE ARE THE ORIGINAL AND SOLE OWNERS OF THIS VEHICLES. *TR

TL* THE CONTACT OWNS A 2006 NISSAN ALTIMA. THE CONTACT STATED THAT THE VEHICLE HESITATED, JERKED AND STALLED SPORADICALLY WHILE DRIVING AT ANY SPEED. THE FAILURE WAS EXPERIENCED NUMEROUS TIMES. THE VEHICLE WAS TAKEN TO THE DEALER AND A DIAGNOSTIC WAS PERFORMED, WHICH LOCATED THE FAILURE AT THE SPEED SENSOR AND THE CRANK SHAFT POSITION SENSOR. THE MANUFACTURER ADVISED THAT THE VEHICLE WAS NOT INCLUDED IN NHTSA CAMPAIGN NUMBER 07V52700 (ENGINE AND ENGINE COOLING). THE VEHICLE WAS NOT REPAIRED. THE APPROXIMATE FAILURE MILEAGE WAS 104,000 AND THE APPROXIMATE CURRENT MILEAGE WAS 107,000.

THIS IS ABOUT THE 15TH NEWER ALTIMA THAT HAS NO FLOORBOARD IN IT AND I DONT SEE HOW THE CARS WILL FARE WELL IN A CRASH. I DECIDED TO COMPLAIN BECAUSE OF SHE SHEER VOLUME OF PEOPLE SAYING THEIR CARS ARE AFFECTED THE SAME WAY. YOU HAVE TO DO SOMETHING ABOUT THIS ! *TR

VEHICLE STALLED WHILE DRIVING IN HEAVY TRAFFIC WHILE ON MY WAY HOME. AFTER SEVERAL MINUTES, VEHICLE STARTED AND I WAS ABLE TO DRIVE HOME. SEL CAME ON AND ERROR CODE SAID "CRANKSHAFT POSITION SENSOR". TOOK IT TO MY LOCAL GARAGE AND WAS TOLD THIS WAS A VERY COMMON PROBLEM ON NISSAN ALTIMA. CONTACTED DEALERSHIP AND WAS TOLD THERE WAS NO ISSUE WITH THIS CAR OR SENSOR BUT THEY COULD REPROGRAM THE ECM TO FIX IT. WENT ONLINE AND I SEE NUMEROUS ISSUES WITH THIS SENSOR. NISSAN MECHANIC ADMITTED THE SENSOR WAS FAULTY AND THAT THE REPLACEMENT PART WAS REDESIGNED TO CORRECT THE ERROR AND INCLUDES A CAM SHAFT POSITION SENSOR AS WELL SINCE THEY GO OUT FREQUENTLY AS WELL. IF NISSAN IS AWARE OF ISSUE AND HAS REDESIGNED THE REPLACEMENT PART, WHY NO RECALL. I AM OUT $150 WHICH IS NO BIG DEAL, BUT A VEHICLE STALLING ON A HIGHWAY WHEN NISSAN KNOWS THE PART IS FAULTY IS EXTREMELY CONCERNING TO ME. *TR

WHILE ENTERING MY 2006 NISSAN ALTIMA WHILE IT WAS PARKED ON JUNE 15TH 2013, I ATTEMPTED TO START THE CAR ONLY TO FIND MY CLUTCH PEDAL WAS PRESSED UP ALL THE WAY INTO THE UNDERSIDE OF THE CAR GIVING THE APPEARANCE OF NOT HAVING A CLUTCH PEDAL. I HAD TO USE MY HAND TO PULL THE PEDAL BACK DOWN AT WHICH POINT IT FELL TO THE FLOOR OF THE CAR. AFTER REPEATEDLY PRESSING DOWN ON THE PEDAL AND PULLING IT BACK UP, THE PEDAL EVENTUALLY GAVE RESISTANCE. I PURCHASED THIS VEHICLE IN JANUARY 2010 AND FOR THE YEAR FOLLOWING I HAD TO BRING THE CAR BACK TO KOEPPEL NISSAN IN JACKSON HEIGHTS MULTIPLE TIMES TO HAVE THE CLUTCH PEDAL REPLACED. THEY FINALLY REPLACED THE ENTIRE CLUTCH SYSTEM ROUGHLY THE SUMMER OF 2011. AND I AM NOW HAVING THIS PROBLEM WITH THE PEDAL BARELY GIVING RESISTANCE WHEN PRESSED AS WELL AS THE PEDAL FALLING TO THE FLOOR OF THE CAR. *TR