2013 RAM 1500 Complaints

I TOOK MY TRUCK IN FOR THE RECALL ON THE OCCUPANT RESTRAINT CONTROL MODULE, THE LIGHT WOULD COME ON ALL THE TIME. IT WAS TOOKEN CARE OF ON 07/16/ 2018, AND THE LIGHT WENT OFF. 9 MONTHS L;ATER IT CAME BACK ON.I TOOK MY TRUCK BACK IN ON 04/29/2019. THE ADVISOR FOR HOBLIT CHRYSLER, BY THE NAME OD MARIO PORTILLO 017155 CALLED ME AND SAID IT WOULD COST $550 TO REPAIR AND HE SAID IT WAS NOT THE SELT BELT RESTRAIN.I SAID NO I'AM NOT PAYING, AND THAT I WAS COMING TO GET MY TTRUCK. I NOTICE THAT THE LIKE WAS OFF AND HE DIDN'T STATE IN THE REPORT. I CAME BY AND ASKED HIM TO PUT IT IN THE REPORT THAT THE LIGHT WAS NOT ON, HE DID AND HE ALSO STATED THAT THE LIGHT WILL COME BACK ON, BUT HE WOULD NOT SAY WHY THE LIGHT IS OFF NOW. I BELIEVE THESE ARE DISHONEST WOULD PLEASE GIVE ME SOME INFO AS TO WHAT SHOULD I DO IF THIS LIGHT COMES BACK ON.

ENGINE CHECK, TRACTION CONTROL, ANTI-SKID LIGHTS COMES ON WITH A MESSAGE THROTTLE CONTROL REQUIRES SERVICE. THE ENGINE LOSSES ALL POWER OR STALLS MAKING VEHICLE DIFFICULT TO CONTROL, STOP AND GET OUT OF TRAFFIC. I HAVE REPLACED THE THROTTLE CONTROL WHILE THE CHECK ENGINE LIGHT WAS ON , IT DID NOT CORRECT THE PROBLEM. AFTER THE TRUCK SITS FOR A DAY OR TWO ALL PROBLEMS CLEAR. 4-23-2019 IS MY THIRD INCIDENT IN 4 MONTHS.

THE SERVICE AIRBAG SYSTEM WARNING KEEPS RANDOMLY BEEPING AND FLASHING ON DASHBOARD.

LOSS OF POWER AND HESITATION ACCOMPANIED BY THE ENGINE LIGHT LED ME TO BRINGING MY TRUCK INTO THE DEALER. AT FIRST I ASSUMED IT WAS ANOTHER SENSOR BUT AFTER 3 DAYS OF INVESTIGATING THE REAL PROBLEM WAS FOUND TO BE THE LIFTERS AND CAM SHAFT. MUCH LIKE MANY MANY OF COMPLAINTS I'VE SEEN ON THIS AND OTHER FORUMS. AND MUCH LIKE THEM I HAD TO WAIT FOR IT TO BE REPAIRED, WASN'T UNDER WARRANTY AND COST ME OVER $4K WITH NO PROMISE THAT IT WON'T HAPPEN AGAIN. PLEASE TELL ME AND SO MANY OTHERS WITH THIS SAME EXACT ISSUE WHY THERE HASN'T BEEN A [XXX] RECALL WITH THIS!? PARTS OF THIS DOCUMENT HAVE BEEN REDACTED TO PROTECT PERSONALLY IDENTIFIABLE INFORMATION PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6).

FIRST EXPERIENCED MALFUNCTION OF THE REAR DRIVER'S SIDE AUTOMATIC DOOR LOCK NOT CYCLING WITH THE OTHER LOCKS. I HAD TO MANUALLY OPERATE THE LOCK BY REACHING AROUND FROM THE FRONT DOOR. THIS WENT ON FOR ABOUT A MONTH, THEN THE DRIVERS DOOR LOCK STARTED DOING THE SAME THING. DOING SOME RESEARCH ONLINE IN RAM FORUMS, THERE WERE SEVERAL OTHER PEOPLE WITH THE SAME COMPLAINT AND ISSUES. OTHER PEOPLE HAD WENT THROUGH THE PAINSTAKING PROCESS OF PAYING THE DEALER TO TROUBLE SHOOT AND REPLACE VARIOUS OTHER PARTS UNTIL THE ISSUE WAS TRACED TO THE BODY CONTROL MODULE (BCM, PART NUMBER 68200252AF FOR MY MODEL). WHEN I CALLED MY LOCAL SERVICE DEPARTMENT, THEY EXPLAINED THAT PART WAS ON BACK ORDER WITH NO ETA. VEHICLE WAS STATIONARY, HAPPENS WHETHER USING THE KEY FOB, OR DOOR HANDLE CONTROLS, OR INSIDE CONSOLE BUTTONS.

I TOOK MY TRUCK IN TO GET LOOKED AT JANUARY 2019 THEY THOUGHT IT WAS THE MANIFOLD OR LIFTERS SO THEY REPLACED THE MANIFOLD AND THAT WAS NOT IT FOUND OUT THAT IT WAS THE LIFTERS THEY TRIED ORDERING LIFTERS FOR MY TRUCK AND THEY WERE NOT ABLE TO GET THEM BECAUSE THEY WERE ON BACK ORDER SO I HAD TO REPLACE THE MOTOR WITH A USED MOTOR I TALKED WITH SOMEBODY A DODGE AND THEY WERE NOT EVEN WILLING TO HELP ME OUT SO I HAD TO PAY OUT OF POCKET FOR THE WHOLE THING NOT A VERY HAPPY DODGE CUSTOMER BUT OBVIOUSLY WITH LIFTERS BEING ON A BACK ORDER TELLS ME THAT MY TRUCK IS NOT THE ONLY ONE I BELIEVE THERE SHOULD BE A RECALL OR SOMETHING DONE ABOUT THIS

OIL LIGHT NEVER CAME ON TO INDICATE THAT MY TRUCK WAS LOW ON OIL NOW MY ENGINE IS BLOWN AND I CAN'T DRIVE MY TRUCK ANYMORE AND I STILL OWE $20,000 ON IT. MY WIFE WAS DRIVING THE TRUCK WHEN IT HAPPENED.

AS I WAS DRIVING TO WORK THIS MORNING I HAD MY CRUSE CONTROL SET AT 65MPH. I REACHED THE NORMAL POINT IN WHICH I TURN THE CRUSE CONTROL OFF EVERY MORNING DUE TO AN APPROACHING INTERSECTION AND THE CRUSE CONTROL BUTTONS ON THE STEERING WHEEL WOULD NOT FUNCTION. I HIT THE BRAKE PEDDLE AND THE CRUSE STILL WOULD NOT SHUT OFF. I WAS ABLE TO GET OUT OF THE TURN LANE AND PROCEED THROUGH THE INTERSECTION, WHICH WAS LUCKILY GREEN, AND SHIFTED THE VEHICLE INTO NEUTRAL AND SHUT IF OFF. UPON STARTING THE VEHICLE BACK UP THE CRUSE CONTROL BUTTONS WILL NOT FUNCTION. I TRIED AGAIN THIS AFTERNOON AND THEY ARE WORKING JUST FINE. EVER SINCE THE WIRE HARNESS WAS REPLACED A FEW YEARS AGO THERE HAVE BEEN ISSUES WITH THE VOLUME CONTROLS FOR THE RADIO BUT THIS IS THE FIRST TIME I HAVE HAD ANY ISSUE WITH THE CRUSE CONTROL. WHAT IF THIS WOULD HAVE HAPPENED AT A BUSY INTERSECTION WITH A RED LIGHT?

I BOUGHT THIS TRUCK IN AUGUST 2016 IN MISSOURI AT A USED CAR DEALER. WHEN I WAS NOTIFIED I HAD A RECALL ON MY VEHICLE I TOOK IT TO THE DEALER. THE DEALER REFUSED TO FIX ANY RECALLS ON THE VEHICLE BECAUSE I WAS BUILT IN CANADA. I WAS NOT TOLD THE VEHICLE WAS FROM CANADA WHEN I BOUGHT IT, NOR DID I KNOW I WOULDN'T BE ABLE TO DO RECALLS. SO BASICALLY I HAVE TO DRIVE AROUND IN A UNSAFE VEHICLE BECAUSE OF THIS.

TURNED THE IGNITION ON AND THE "SERVICE POWER STEERING " LIGHT CAME ON AND WHEN I STARTED THE TRUCK THERE WAS NO POWER STEERING. THE TRUCK HAD 38000 WHEN THIS HAPPENED.