2012 TOYOTA PRIUS Complaints
View complaints related to 2012 TOYOTA PRIUS. The complaints found here are submitted by actual consumers with first hand experience. There are more than 700 complaints submitted for the 2012 TOYOTA PRIUS. You can submit your own complaint to the NHTSA or call the Hotline, Monday-Friday 8am to 8pm at (888) 327-4236, TTY: (800) 424-9153.
-
2012 TOYOTA PRIUS- Charlotte, NC
The brake system (accumulator/booster) has failed and reduced stopping ability. Error code is C1391
Source: NHTSA WEB SITE -
2012 TOYOTA PRIUS PLUG-IN HYBRID- Ft myers, FL
The brake pressure pump comes on every 2 seconds. The warning lights on the dash are on for brakes and abs. The car still stops but it reacts slower to pedal pressure. Dealer says it needs master cylinder and actuator pump for 3000$ at least. It is available for inspection, has 155,000 miles now, but pump has been hyperactive for about 12 mo. May be a hazard now, may fail completely ,I don't know. But too expensive to me to fix. Has only been inspected by autonation Toyota, not police etc. Pump was overactive for a year but right after anautomatic car wash the lights came on an the brake pedal got mushy. Then I called dealer. Apparently a common problem that was a recall for 2010 and silent recall after for later model gen 3s.
Source: NHTSA WEB SITE -
2012 TOYOTA PRIUS- Brea, CA
I have a 2012 Toyota Prius that the Toyota dealership has confirmed that I have a failed ABS actuator and is displaying the correct repair codes for the service bulletin but they refusing to cover any of the costs to replace the ABS actuator and boost pump. Since the failure of the ABS actuator I have had 2 close calls where I needed to stop fast and my tires locked up, I lost control of the car and spun out but luckily I did not hit anything. The brake, ABS, and 2 other warning lights have come on and off intermittently on the dashboard of my 2012 Toyota Prius. I summited a good faith request to the repair my Toyota Prius ABS actuator at Toyota of Anaheim on 10/28/2022 and due to it being 20 days past the 10 year limit and slightly over the 150,000 mile limit at 158,000 they say that I'm 100% responsible for the repair costs of $3,231.78. This proven design flaw is not my fault, it did not occur under normal wear and tear and the brake ABS actuator and boost pump should last much longer than it did. Now I'm faced with paying a huge bill for the repair or pick up my Prius from the dealership and drive it home with a defective ABS actuator. This is another example that Toyota is placing profit ahead of safety.
Source: NHTSA WEB SITE -
2012 TOYOTA PRIUS- Lakemont, GA
The contact owns a 2012 Toyota Prius. The contact stated that while driving approximately 50 MPH, the ABS, brakes, and traction control warning lights illuminated. The brakes became inoperable, but the driver was able to regain control of the vehicle and pulled over. The vehicle was taken to the local dealer where it was diagnosed there was a hydro pump motor fault and hydro motor pump relay fault with codes C1252 and C1253 and the hydro boost brake pump kit and brake assembly needed to be replaced. The vehicle was not repaired. The manufacturer was contacted and referred him to the NHTSA hotline. The approximate failure mileage was 97,000.
Source: HOTLINE VEHICLE OWNERS QUESTIONNAIRE -
2012 TOYOTA PRIUS- Allen, TX
During a hard braking, felt brake pedal softer and less responsive braking. Now ABS Icon, Brake Icon, and Traction Icon is on. Confirmed Code P1391 in ABS system.
Source: NHTSA WEB SITE -
-
2012 TOYOTA PRIUS C- Arlington, VA
I was driving on the expressway and experienced a sudden loss of power. The internal combustion engine suddenly stopped and did not deliver any power to the wheels. I immediately received a message on the system that said 'Check Hybrid System Stop Vehicle in a Safe Place'. The electric motor still continued to provide some power with the available battery charge. I was able to make it to the shoulder of the road but it was challenging to get to the shoulder with no power or warning and high speed traffic. My wife and I were in the vehicle. The vehicle had no engine or error codes until the failure on the expressway. The vehicle has the code P0A1A and P0A94. This is consistent with the error codes in the NHTSA 19V491000 recall and Toyota Safety Recalls E0E and F0R.
Source: NHTSA WEB SITE -
2012 TOYOTA PRIUS V- Plantation, FL
The contact owns a 2012 Toyota Prius V. The contact stated while driving at an undisclosed speed and making a stop, there was a rattling sound coming from the brakes while depressing the brake pedal. The vehicle was taken to the dealer for diagnostic testing. The contact was informed that the brake booster needed to be replaced. The vehicle was not repaired because there were no fault codes retrieved. The manufacturer was contacted and stated that the vehicle was out of warranty. The failure mileage was 100,000.
Source: HOTLINE VEHICLE OWNERS QUESTIONNAIRE -
2012 TOYOTA PRIUS- Brooklyn, NY
My breakes failed when driving. I almost got in accident. Code C1391. Brake Actuaror Failure. car has 200,000 miles. Toyota is denying to repair the car. It is well known problem with that but still not fixing.
Source: NHTSA WEB SITE -
2012 TOYOTA PRIUS V- Granite Bay, CA
The brake booster pump has started to run every 30 seconds while the car is operating. When pressing on the brakes, there is an unusual sound and has begun to feel different. There are no warning lights yet, but after consulting with the local Toyota dealership they informed me of the ZJB Customer Assistance Program which addresses this issue. Unfortunately the offer to repair has expired and the dealership has declined coverage. I contacted Corporate Toyota and they are declining to cover the repair. I don't have the $3500 to replace this brake booster pump at this time. This is a safety concern and I don't understand how this is not a RECALL due to the potential safety concern. PLEASE HOLD TOYOTA ACCOUNTABLE TO THIS SAFETY PROBLEM.
Source: NHTSA WEB SITE -
2012 TOYOTA PRIUS V- Dupont, WA
2012 Toyota Prius V, 125k. Sudden loss of braking power accompanied with BRAKE, BRAKE SYSTEM, SLIP INDICATOR, and PCS warning lights. Scan shows codes B2060 (ABS malfunction) and C1931 (Abnormal leak of brake ACC pressure). Brake fluid significantly lower. No signs of external leak. Can hear the brake booster pump running almost constantly. All signs indicate this is the issue identified in Customer Support Program 20TE07. This is a significant safety issue that may lead to loss of braking and serious injury / death. It should be a recall.
Source: NHTSA WEB SITE