2009 TOYOTA TACOMA Complaints

The contact owns a 2009 Toyota Tacoma. The contact stated while driving at an unknown speed, the vehicle started shaking abnormally. The vehicle was taken to the dealer to be diagnosed. The contact was informed that the subframe needed to be replaced. The contact stated that she had received a recall in the past for the subframe however, the vehicle was not repaired. The dealer and manufacturer were notified of the failure but informed the contact that the recall had expired. The vehicle was not repaired. The failure mileage was approximately 95,000.

Never received notice for XX Warranty Enhancement Program and found out in March 2022 as vehicle cannot pass inspection due to rusty on frame. BRAND ENGAGEMENT ADVOCATE March 09, 2022 at 12:18 PM Dear [XXX], Thank you for contacting Toyota Motor Sales, U.S.A., Inc. regarding your frame concern in your 2009 Tacoma. We are sorry to learn you're experiencing a concern with your vehicle. We were able to further look into your frame concern and have verified your vehicle is beyond the parameters of the Warranty Enhancement Program for this concern. This warranty enhancement program was an extension of the vehicle's Basic Warranty. Primary coverage for this program expired on 01/31/19 and Secondary coverage for your vehicle expired 12 years after the date of first use: 06/30/20. Once the vehicle is outside of the program parameters, the cost of repairs becomes the owner’s responsibility, as the component is now outside of all factory coverage. We have also verified that one letter was sent to you at the mailing address we have on file. The remedy letter for the XX Warranty Enhancement Program was sent on 11/08/2018. We hope this provides clarity to your inquiry. Your comment has been documented at our National Headquarters under your case number. If we can be of further assistance, please feel free to contact us. Sincerely, [XXX] Toyota Brand Engagement Center INFORMATION Redacted PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6).

The chassis of my truck is rusting through. I took it to the dealership and was told that the recall for the vehicle chassis expired in 2019. I told them I was not aware of the recall. They then told me the recall was extended until 2021. I told them I brought the vehicle in for a recall repair in 2020 and asked that they check for all recalled repairs. They said they couldn't help me and directed me to the manufacturer. I called Toyota and they claimed that I was ineligible for a recall. Every repair shop I've gone to told me that this is a very common defect with Toyota and everyone gets it resolved through recall. Please assist me.

The contact owns a 2009 Toyota Tacoma. The contact stated while driving approximately 60 MPH, the tire hit the wheel well and the frame was ripped apart. The dealer sent a technician to the contact’s home to inspect the vehicle. The contact was informed that the sub frame needed to be replaced however, the vehicle was not repaired. The manufacturer was informed of the failure. The manufacturer informed the contact that the vehicle was out of warranty. The failure mileage was approximately 250,000.

The contact owns a 2009 Toyota Tacoma. The contact stated that while the vehicle was at an independent mechanic for routine maintenance, the mechanic informed him that there was a hole in the sub-frame and that the sub-frame was severely corroded. The vehicle was not repaired. The manufacturer was made aware of the failure but informed the contact that there was no recall associated with the VIN. Additionally, the extended warranty had expired. The vehicle had previously been serviced in 2017 when the dealer applied an undercoating to the subframe. The failure mileage was 65,136.

I own a '09 Toyota Tacoma (VIN: [XXX]) that I purchased 5/15/18 from Long Subaru, Webster Ma. On 9/1/21 we noticed a rot hole in the frame. We then learned there was a recall/warranty extension on rotted '09 Tacoma frames. On 9/2/21 we brought the truck to Toyota of Nashua, NH. We were told the warranty extension expired in May and the frame would not be covered. We were sent on our way as if this vehicle is safe to drive. I brought the vehicle to a mechanic to see if he could weld a plate over the hole. He said the frame was so rotted and nothing to weld it to. He also detected movement in the frame due to all the rot. He said it was unsafe to drive. On 9/23 I called Toyota corporate customer service to understand why I was never notified. They said they sent notification to the previous owner, then tried to backtrack and say they also sent it to me. Several days later we learned from a Toyota dealership employee (off the record) that the notification was never sent to us and only sent to the previous owner . Their failure to notify us of a safety recall (which some articles state was masked as a warranty extension) has put us at risk. This rot didn't happen over the summer! They need another recall to save lives before someone gets injured! 10/19/21 I called Toyota customer service again. I tried to get this issue escalated to a supervisor. They put me on hold. After 1 hour I hung up. 10/19/21 I filed a claim with the Massachusetts AG. They pointed me in your direction I am so baffled how this vehicle passed yearly inspections. During Mass inspections we don’t pass vehicles with dark tinted windows, lift kits that are too high, aftermarket headlights/brake light, yet, we pass a vehicle with a rotted frame that had a recall on it and a class action lawsuit. There are so many failure points here. INFORMATION Redacted PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6).

I had my mechanic take the passenger door panel off to investigate a rattle in the door. What he found was the seat belt anchor bolt for the front passenger had come loose and was rattling around inside the access door ( a rear door where the front passenger seatbelt is mounted). This is a serious safety problem as the seatbelt would not have worked properly in an accident, not being properly bolted/anchored to the vehicle. My mechanic stated he has never seen a bolt like this come loose before, usually they are so tight they are very difficult to remove. I have never received a recall notice for this problem and have always taken this vehicle in for all recalls. I am really upset as I now see Toyota has an informal recall for this problem, yet I had to pay a mechanic to fix it. The consumer did have the recall repair performed.

The contact owns a 2009 Toyota Tacoma. The contact stated while the vehicle was at a local dealer they informed the contact that their vehicle frame was rusted and needed to be replaced. Upon investigation, the contact associated the failure with, NHTSA Campaign Number: 14V604000 (SUSPENSION) however the VIN was not included. The manufacturer was informed of failure and told the contact that they were unable to assist. The failure mileage was approximately 75,000.

The vehicle has an excessive frame rotten. The car was inspected by Toyota dealer confirming the issue. The issue appeared the first week of August 2021.

The daytime driving lights are too hot causing the plastic housing to melt, crack and, in some cases, break. My research has found that this is a common problem in Toyota Tacoma trucks from 2005-11. In April 2015, Toyota replaced the headlight assemblies with a supposed "redesigned" assembly to address this issue. However, now in April 2021, the "redesigned" assemblies have again melted, cracked and broken due to the daytime driving lights being too hot and too close to the light assembly. Nothing was redesigned in 2015. Whatever safety or fire hazard in the owner or operator that caused Toyota to replace the headlight assemblies in 2015 still exists today. I have contacted Toyota and my dealer and they have offered no assistance or remedy.