WINNEBAGO Complaints

the blind spot monitoring system has never worked correctly. Originally when a vehicle appeared in the left hand (driver side) blind spot, the right hand warning light (indicating vehicle in passenger side blind spot) would illuminate - then vice versa. A vehicle in the passenger side blind spot would result in the driver side warning light illuminating. This would cause the driver to think that there was a vehicle in a blind spot on the wrong side of the vehicle. if acted on the driver could maneuver in a way that would cause rather than avoid an accident. The dealer from whom I bought the vehicle (National Indoor RV Center of Lawrenceville GA) has tried twice without success to rectify the issue. The last time the unit stopped working completely (which is better than it working in reverse) On the owners facebook group failures of the blind spot monitoring system are a common occurence, as such I believe NHTSA should be informed. For me personally no actual accident occurred although shortly after taking delivery of the vehicle I did have a near miss.

According to recall No. 20V-695 Trailers were built with undersized axles with Production Dates : AUG 06, 2020 - AUG 27, 2020. Undersized axles were installed in error. After inspecting my unit I found that my axle size was 2,500 lb. and the unit should have a 3,000 lb. axle. My manufactured date is Sept. 2020 and was not included in the recall. Undersized axles may not support the weight of the vehicle and could break and cause serious injury. See uploaded Docs.

I kept having issues with the drivers seat belt not retracting properly (since purchased new) after use creating a tremendous amount of slack in the belt the next time it was used. I actually had to drive it several times with an extremely slack belt basically just hanging on my lap. Since this is a tri-point seat belt, in the event of a crash the entire belt would fail to keep the seat occupant safely belted to the seat including the chest strap AND lap belt. On further inspection by myself, I was able to determine the cause and keep it from happening again or at least correct the issue each time prior to driving the vehicle. I have recently seen this on 2 other Winnebago Forza's. 1 with the same floor plan (38W) and the other with a different plan. I have not mentioned this safety defect to either the manufacturer or any of their dealerships for fear they would simply fix mine and not look into all the other motorhomes they have made they may have the same issue. What is happening is that the seat belt was clearly installed prior to the interior finishing. When they installed the wood veneer that surrounds the place where the belt is attached to the sidewall (not floor). They didn't trim a large enough opening in the wood causing this pivot point on the belt to stick. When the driver pulls on the belt to attempt to free it, the belt twist and becomes bound up leading to slack in the belt. It's an easy fix to trim away some of the wood freeing this pivot up to operate normally.

We bought Winnebago Revel RV from La Mesa RV center at Davis, CA in May 2023. We took a trip from San Jose, CA to San Luis Obispo in June, the brake fluid was total running out during our driving on Hyw 1! We contact a local Mercedes-Benz shop, they found out the issue was caused by an aftermarket suspension installed improperly. This incident is a life threaten one, luckily we were driving at 35 Mph zone, otherwise we couldn't imagine what could happen to us! BTW, we went back to the dealer last week, we found out the same model RVs all had the same aftermarket suspensions installed! This could cause very server accidents in future!!!

Balmar Regulator creating sparks under hood eventually blowing a fuse. Shows signs of a shorted wire somewhere in the vehicle.

The Blind Spot Warning system on my 2022 Winnebago Ekko has completely failed two times. Both failures occurred after driving in wet weather. The system components appear susceptible to shorting out when exposed to water. Anecdotal evidence via social media posts from other Ekko Owners suggest this is a very common issue on Winnebago Ekkos.

The Balmar alternator gets very hot and emits very loud high-pitched whine. Others who have reported this heat/sound without further action have reported the alternator has caught on fire.

When we purchased our EKKO in Sep 2022, the blind spot monitoring system worked, notifying us by beeping & lights on the sides of the cab if cars were in the blind spot areas. Approximately 2-3 months after we took EKKO possession, the notifications from the blind spot monitoring system stopped. Winnebago has acknowledged the problem, changing the BSM system in some newer models. We have an upcoming dealer appointment for attempted repair.

The balmar regulator/ 2nd alternator is failing and presenting a fire hazard based off of Winnebago’s own reports and other owners who have experienced fires to their Ekkos. Because of this we have had to spend a considerable amount of money getting another safe charger option (dc - dc charger wired properly and safely unlike winnebagos 2nd alternator/balmar regulator) from the primary alternator installed since we cannot rely on or use the 2nd alternator with the balmar regulator without threat of fire, serious injury, or possible death. We have not been advised on what to do to prevent this and Winnebago is not providing an actual remedy in a timely fashion (or financially reasonable to us as a owner, as we have to pay out of pocket to travel 3000 miles round trip for this repair when it is available). They need to provide guidance immediately as this is a life threatening hazard and remedy it as soon as possible, while not putting the owners lives at risk and providing compensation for owner traveling thousands of miles for the fix.

The solar panels ceased to charge the batteries. I found a 40A Fuse holder behind the solar controller in the coach, that had melted and looked like it could have caught on fire.