2025 BMW X3 Complaints

Rear view camera can be obstructed entirely by other full screen elements when interacting with hard of soft buttons. This 100% reproducible effect results in the need to occasionally shift back into park and then reverse to restart the rvc process and have the video appear on top of other on screen content. This appears to violate fmvss rules for reverse cameras.

My accident on [XXX] with my 2025 BMW X3 VIN [XXX] was avoidable and caused by either failure in design, or in execution in two BMW systems, I'll discuss rear emergency braking here. Pictures and videos (even one of the crash) can be downloaded here: [XXX] . I was driving the car in what I believe to be an assisted parking situation, but the car did not follow the assisted path. I've filled out a safety report on that already. According to page 172 of BMW’s 416 page manual, there is a rear collision mitigation function with audible, visual, and autonomous braking. The system provided no warning of any kind—not audible, visual, or any braking whatsoever to avoid this accident. My husband had installed a trailer hitch on this vehicle. That involved removal of the bumper fascia that houses some sensors that may be involved in rear autonomous braking. However, my husband reports that the fascia was removed and replaced without incident and in exactly the same location as it originally was. We never experienced any error codes of any kind from the vehicle at any time and these sensors were working during parking to note proximity to other vehicles. There is nothing in the owner's manual to indicate any issues with removing the bumper when installing a hitch. The trailer hitch was purchased from [XXX] and they have 2 videos regarding hitch installation on the 2025 BMW X3 and my husband says he installed it consistent with these videos, as well as the PDF from the hitch manufacturer. None note having to readjust the safety system after installation of the hitch. BMW has not specifically claimed that the trailer hitch was involved, but did note that it was installed. They are involved in assessing this accident. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

The contact owns a 2025 BMW X3. The contact received notification of NHTSA Campaign Number: 25V202000 (Electrical System); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

On May 26, 2025, after I arrived home and parked my 2025 BMW X3, the vehicle caught fire approximately 30 minutes later. The fire started due to a known recall issue (NHTSA Recall No. 25V202) related to the electrical/starter-generator connection, which can cause overheating and fire. I contacted BMW multiple times before the incident — on April 19, May 9, and May 25 — requesting help to fix the open recall, but they failed to take action. The fire was sudden and violent, putting my life and property at risk. Firefighters and police responded; case number: 25/200048976. I filed a claim with Progressive Insurance and have photos and documentation available.

When parking, parked or when I put it in drive and turn the wheel to drive off turning Steering wheel there is a deep gridding noise. Comment: This could be due to issues with the steering wheel assembly, suspension component, a sign of manufactory defects in the bearings, bushings, or other parts of the steering system. Driving with this noise that appears only when using the Steering System can put additional stress on other components and potentially lead to more significant damage and is a consistent Safety concern. For this issue the car had 3 service visits and continuous the same problem. Dealer Service said they try fix it changing tie rods but they are no sure solve the issue .

The contact owns a 2025 BMW X3. The contact stated that while driving 1 MPH in stop and go traffic and approaching another vehicle, the vehicle suddenly accelerated and bucked four times. There were no warning lights illuminated. The local dealer was not contacted. The vehicle was not diagnosed or repaired. The manufacturer was not contacted. The failure mileage was approximately 1,000.

I am reporting an unresolved safety recall (NHTSA Recall Number: 25V202) on my 2025 BMW X3 (VIN: [XXX] ). The recall is related to a defect in the electrical connection between the starter-generator and the positive battery cable. This could lead to engine stalling while driving, or in extreme cases, a fire due to overheating and smoldering. The defect creates a serious safety risk to both driver and passengers. I purchased this vehicle under financing, and I am still making monthly payments while being unable to safely use it. There is currently no remedy available, and BMW has not provided a timeline or solution. I am afraid to drive this car due to the potential danger. I am requesting urgent action from NHTSA to escalate the resolution of this safety issue. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

The contact owns a 2025 BMW X3. The contact stated that while reaching into the vehicle, his jacket became snagged. After a visual inspection, the contact observed a "D-ring" metal sticking out a 1/4 inch from the interior C-Pillar, creating a potential laceration risk. No warning lights were illuminated. The vehicle was not taken to the dealer or an independent mechanic. The vehicle was not repaired. The manufacturer was notified of the failure, and a case was opened. The failure mileage was 100.

Car suddenly wouldnt start and gave drivetrain malfunction. Had to get towed to dealer. Car is a 2025 X3 that is less than a month old and 600 miles driven so practically brand new.

While driving away from a stop sign in clear bright daylight weather conditions, the car automatically instituted an emergency stop almost causing the car behind me to rear end my car. I am assuming that it was the "drive off safety feature" and after turning off that safety feature and had no repeat. To be clear, I actually have no idea what software system cause the emergency breaking but there were no obstructions, pedestrians or other things that should have triggered the stop.