2018 BMW X3 Complaints

There were several radiatior hose leaks that happened in the winter due to the outdated plastic housing and lines that seized and cracked with colder temperatures. It has become extremely common historically and not considered affordable part or labor to replace.

The sunroof drains of the vehicle become easily clogged. When this happens, water drains into the battery compartment and interior of the vehicle. Although BMW is aware of this, and the attendant danger of having water pooling in the battery compartment, they have not addressed the issue. There are no warning lamps, messages or other symptoms prior to the problem.

While driving on the interstate lost coolant through the oil cooler housing. I had to quickly get to the shoulder of the road having to cross several lanes of traffic. The car had to be towed. I had it towed to the dealership where I purchased it as I paid for an extended warranty. Warranty company denied the claim. Through research I am finding this is an issue with BMWs as they part is plastic and does not stand up well with the temperature changes it is subjected to. This needs to be a recall. The car is still in the shop, 45 days later. Approximate cost to repair $2,840.00 plus tax.

BMW installed a part that is failing quite a number of vehicles including this vehicle. The oil filter housing was not properly constructed at the factory. Fails.

Oil pump failure due to plastic brittle materials failing prematurely. It is a common problem that is well documented across the owners that have this vehicle.

Vehicle lost coolant and warned me to pull over because of the engine overheating. Later was diagnosed with a leaking oil filter housing. Simply too early for such a component to fail. Left my wife stranded miles away from home in the snow.

This problem has occurred to me now twice. Both occurrences were on very cold days where the temperature was below 20 degrees F. The car starts promptly and runs, but the entire dashboard electronic instrument cluster is non-functioning and dark . In this condition, you cannot tell your speed, engine rpm, fuel level, engine temperature, or any mileage numbers. The turn signals also do not work. The headlights and the iDrive screen and the climate control were all lit properly and functioned. I did not think to check the brake or tailights, unfortunately. Multiple restarts of the car had no effect, and so I drove home without the dash functions. After the car sat overnight in my garage (which is somewhat warmer) the dash lights returned to their proper function.

The Front Passenger Seat Occupancy Sensor Mat (CIS) in my 2018 BMW X3 failed at 56,000 miles. This failure is confirmed by the specific BMW fault code 930A1C (Seat Occupancy Detector Malfunction) stored in the Advanced Crash Safety Module (ACSM). The component is currently installed in the vehicle and available for inspection. This defect poses a severe safety risk: the system fails to consistently detect a seated front passenger. As a result, the passenger airbag may be disabled and fail to deploy in a collision, significantly increasing the risk of injury or death. The dashboard displays a "Passenger Restraint System" malfunction warning, accompanied by an airbag light and chime. The issue is intermittent and load-dependent. It triggers specifically when an adult passenger occupies the seat for extended periods (e.g., highway driving), indicating a physical fatigue failure of the sensor mat grid under compression. I diagnosed the fault using BMW factory-level diagnostics. However, both the local BMW dealership and BMW North America have refused to cover the diagnosis or repair under the existing warranty extension (SIB 72 01 25) for this exact component, stating my specific VIN is excluded despite the vehicle exhibiting the known safety defect.

Part number 17127799184 keeps melting. Over the years I have had multiple components under the hood to melt. I’ve replaced hydraulic lines, coolant reservoirs you name it. Most recently part number 17127799184 keeps melting. I’ve replaced this part three times. My car is currently at Bloomfield hill bmw of Michigan. They did a diagnostic but it states they cannot definitively tell me what’s causing the issue. They advise I start with replacing the heating module but cannot guarantee it will resolve the issue. They stated my car is producing no symptoms. I contacted the corporate office with hopes they would assist with a good will service request. However it appears not only do they not stand behind their products but apparently bmw’s are only meant to last 4-5 years. When questioned if it’s normal for components to continuously melt under the hood he agreed it is not. However refused to offer an equitable solution considering the issues I’ve had over the years and their mechanics currently not being able to state 100 percent what’s wrong with the automobile. When I told him my mother drove a Volvo for 20 years are you saying in 7 years parts on a car should melt? He didn’t offer a response wished me a happy holiday and concluded the call.

The contact owns a 2018 BMW X3. The contact stated that while driving over 45 MPH, the Lane Departure and Blind Spot features deactivated unintendedly. The message that the system was deactivated was displayed. The local dealer was contacted. The vehicle was not diagnosed or repaired. The manufacturer was contacted and referred the contact to the NHTSA Hotline. The failure mileage was approximately 71,000.