2020 CHEVROLET SILVERADO 1500 Complaints
View complaints related to 2020 CHEVROLET SILVERADO 1500. The complaints found here are submitted by actual consumers with first hand experience. There are more than 670 complaints submitted for the 2020 CHEVROLET SILVERADO 1500. You can submit your own complaint to the NHTSA or call the Hotline, Monday-Friday 8am to 8pm at (888) 327-4236, TTY: (800) 424-9153.
-
2020 CHEVROLET SILVERADO 1500- Mobile, AL
The contact owns a 2020 Chevrolet Silverado 1500. The contact stated that while driving at approximately 40 MPH, the vehicle shuddered and downshifted independently. No warning lights illuminated. Additionally, an OBD2 diagnostic scan retrieved diagnostic trouble codes: U0146, U0101, and U0100. A local dealer was contacted; however, the vehicle was not diagnosed or repaired because the VIN was not included in any recall. Additionally, the contact related the failure to NHTSA Campaign Number: 24V797000 (Power Train). The manufacturer was not made aware of the failure. The failure mileage was approximately 84,000.
Source: HOTLINE VEHICLE OWNERS QUESTIONNAIRE -
2020 CHEVROLET SILVERADO 1500- Hanover, MI
The contact owns a 2020 Chevrolet Silverado 1500. The contact stated while driving at 35 MPH, the engine started knocking, and the sound grew louder while making a turn. The Electronic Stability Control and check engine warning lights illuminated. The vehicle was taken to a local dealer, where one diagnostic trouble code was displayed, but the vehicle was not repaired. The vehicle was then taken to a second local dealer, who retrieved a code for fuel injector number eight and diagnosed that the engine needed to be replaced; however, the vehicle was not repaired. The vehicle was taken to a third dealership, Knapp Chevrolet, where it was diagnosed that the engine needed to be replaced. The vehicle remained unrepaired. The manufacturer was contacted and opened a case, but no additional assistance was provided. The failure mileage was approximately 94,000.
Source: HOTLINE VEHICLE OWNERS QUESTIONNAIRE -
2020 CHEVROLET SILVERADO 1500- PIERCEFIELD, NY
I have a Trial Boss and it wont shut off when the key is off, KEEPS RUNNING. Did some research and it gave a couple of thing to check.
Source: NHTSA WEB SITE -
2020 CHEVROLET SILVERADO 1500- Tekamah, NE
while driving pulling a trailer with my kid in the car engine began knocking and lost power. upon investigation it was a failed lifter causing bent pushrod
Source: NHTSA WEB SITE -
2020 CHEVROLET SILVERADO 1500- Northwood, NH
The rear camera view is skewed resulting in inaccurate reference angles of the vehicle. When used to assist in reversing results in improper placement of vehicle and can cause collision of vehicle with objects.
Source: NHTSA WEB SITE -
-
2020 CHEVROLET SILVERADO 1500- Newman, CA
I am filing this complaint regarding a major engine failure in my 2020 Chevrolet Silverado 1500 equipped with the 5.3L V8 engine. At approximately 56,000 miles, my vehicle experienced a failed valve lifter, resulting in loud engine ticking, a check engine light, loss of power, and unsafe driving conditions. The vehicle was no longer operating properly and required immediate repair. Although the vehicle had been regularly maintained and had relatively low mileage for such a significant engine issue, I was informed that the failed lifter damaged the camshaft and related engine components, requiring extensive repairs. The total cost of the repair was $6,180, which I paid out of pocket. My Silverado was just outside Chevrolet's 5-year/60,000-mile powertrain warranty period by time, despite having only 56,000 miles. A major internal engine failure should not occur on a well-maintained vehicle with such low mileage. After researching this issue, I discovered that lifter failures involving the Active Fuel Management (AFM) and Dynamic Fuel Management (DFM) systems in GM's 5.3L engines have been widely reported by other Chevrolet Silverado owners. This indicates a potential design or manufacturing defect rather than normal wear and tear. I am requesting that General Motors provide reimbursement or goodwill assistance for all or a substantial portion of the $6,180 repair cost. I believe customers should not be responsible for paying thousands of dollars to repair a known issue on a low-mileage vehicle. I respectfully request that this matter be reviewed and resolved promptly.
Source: NHTSA WEB SITE -
2020 CHEVROLET SILVERADO 1500- Killeen, TX
Engine light came on and off and June 10, 2026 The truck just stole and no power to go
Source: NHTSA WEB SITE -
2020 CHEVROLET SILVERADO 1500- Springfield, MO
I'm experiencing all the documented issues with the 10L80 10 speed transmission. Identical to all the recalls. It's shifting poorly, torque converter shudder, lose of power, unreliability, and serious safety concerns. I've tried to communicate and find a resolution to these issues through the dealership and GM. Of course getting nowhere. I don't feel a 60k dollar truck should be in this kind of condition. Recently the ac compressor went out. Conveniently after the 6.2 was considered faulty and was replaced but transmission denied. Which the dealership GM expressed in no way was any factors the warranty companies claims of a taller tire being on the truck. Being the issue at all for the transmission failure. Also the dealership didn't check a box. One that I can not physically check. Which they put on me. They swapped the stock tires to the taller brand new set I'd just bought for my trade in. Never stating anything about the tires being taller voiding the warranty I just paid for. Why would I deny the part of the extended warranty that I wanted. Cause of the suspension and drivetrain. Either way this truck is not safe to be on the road. It struggles to maintain speed on the highway. Eventually leading to the torque converter free spinning and making all kinds of noises and vibration. Of course once I've assisted it to violently shift through the gears and hopefully into 10th. On occasions it never makes it that far. Either way I feel this falls directly into the recalls with the same model and year. They replaced the 6.2 cause of cylinder failure and oil consumption. Well the next in line for the drive train is the junk 10 speed. Not sure how it can't be related. The long and stressful time. I've put into finding a solution with the dealer or manufacturer. They blow me off or just don't give me any info. I feel that's their way of dismissing not only the failure of the salesman not properly doing his job. Which the GManager also stated mistakes happen. Not OK
Source: NHTSA WEB SITE -
2020 CHEVROLET SILVERADO 1500- Mitchell, SD
The contact owns a 2020 Chevrolet Silverado 1500. The contact stated that while driving at 25 MPH, the vehicle suddenly made knocking sounds. The Check Engine warning light illuminated. Additionally, the vehicle experienced rough idling and a decrease in motive power. The vehicle was taken to an independent mechanic, who determined the lifters had collapsed and bent the push rod. The push rod was replaced, but the newly installed part instantly bent. The mechanic informed the contact that the cam needed to be replaced. The local dealer was contacted, but the vehicle was not diagnosed or repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 107,800.
Source: HOTLINE VEHICLE OWNERS QUESTIONNAIRE -
2020 CHEVROLET SILVERADO 1500- Panama City Beach , FL
GM has a known recall and special coverage N242454441 to cover the exact same issue I experienced on my way home from work. However, I am informed my model is not included in this special coverage. The issue I experienced while attempting to turn into my apartment complex on a busy road [XXX] my rear wheels locked up mid turn no warning signs, no lamps, no messages or other symptoms were present. Almost causing me to get into an accident had traffic not stopped. I was able to shift it into park and then to drive to immediately pull off to the side into a parking lot and put my OBD reader I have P0747 solenoid 1 failed locked on. I was informed by GM that they could attempt to reprogram the transmission control model, however based on research this is not the root cause of the issue it is due to the soft aluminum bores causing the transmission module to ware and fail. I have a service appointment on 6-12-26 at 10 am at Bill Cramer GM in Panama City, FL INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Source: NHTSA WEB SITE