2020 FORD F-250 SD Complaints

The contact owns a 2020 Ford F-250. The contact received notifications of NHTSA Campaign Number: 25V626000 (Steering) and 25V686000 (Back Over Prevention). The local dealer was contacted and determined that parts were not yet available for the recall repairs. The vehicle was not diagnosed or repaired. The manufacturer was not contacted. The contact had not experienced a failure.

2020 Ford F250 with 85,000 miles. We purchased new and all maintenance has been done on time and by Ford Service. Transmission began jerking when going from park to drive (or reverse). Noticeable lunging of the vehicle when putting into gear. This began in December 2025. This is a safety concern if anyone is in front of or behind the vehicle when this happens. The truck jumps. Now the transmission is not shifting gears smoothly when the truck is in motion. This is a known problem with trucks manufactured during this time period with 10R80 transmissions. Ford has been less than helpful in helping me come to a resolution. They tell me there was a TSB sent out. They attempted to reprogram software (at a cost of $424 to me). I will upload the invoice from Ford. This only made the problem worse. They quoted me a "special price" of $8,500 to replace the transmission, however their service department is SIX WEEKS out. For this reason we have chosen to have the transmission replaced at a local transmission shop. Their price is $9,932.41. I have attached that invoice. Ford needs to take accountability for this safety problem and attempt to make these vehicles safe. They should absorb at least some of the cost to fix this design problem. We paid full price to purchase a new, safe vehicle. That is not what we received. Rather than a "Technical Service Bulletin", Ford should be forced to do a recall and make this right for customers who paid top dollar for these vehicles.

The contact owned a 2020 Ford F-250. The contact stated that while driving at 75 MPH, he smelled a burning odor, but assumed it was coming from outside. Two minutes later, smoke filled the cabin. No warning light was illuminated. The contact heard flames coming from the dashboard. The contact pulled over and safely exited the vehicle. The contact saw that the engine compartment had caught on fire before the vehicle was completely engulfed in flames. A police officer was driving behind the vehicle and witnessed the fire. A police report was filed. Firefighters arrived and extinguished the fire. The contact was unsure whether a fire department report had been filed. The vehicle was towed to a tow yard, where it was deemed totaled by the insurance company. The manufacturer was not made aware of the failure. The failure mileage was approximately 98,000.

The contact owns a 2020 Ford F-250. The contact received notification of NHTSA Campaign Number: 24V957000 (FUEL SYSTEM, DIESEL); however, the part to do the recall repair was unavailable. The local dealer was contacted, and it was confirmed that the part was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact stated that while driving, there was a ticking sound coming from the engine compartment. The cause of the failure was not yet determined. The failure mileage was 76,000.

The contact owns a 2020 Ford F-250. The contact received notifications of NHTSA Campaign Numbers: 24V957000 (Fuel System, Diesel), 25V626000 (Steering), and 25V686000 (Back Over Prevention); however, parts to do the recall repairs were not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact stated that the vehicle had experienced PCM failure. The vehicle was not repaired. The failure mileage was unknown.

The contact owns a 2020 Ford F-250 SD. The contact stated while driving at an undisclosed speed, the accelerator pedal was depressed, however, the vehicle failed to accelerate as intended. The vehicle lost motive power and the engine seized. The contact stated that the vehicle failed to restart, and a Police Officer assisted the contact in moving the vehicle to the shoulder of the road. The contact stated that the failure occurred while driving on a busy highway, which could have caused someone to be seriously injured. The contact stated that the incident was significantly scary, and the Police Officer arrived after 21 minutes. The contact stated that there were no warning lights illuminated prior to the failure. The contact stated that the check engine warning light illuminated after the failure occurred. The vehicle was towed to the dealer, where it was diagnosed that the fuel pump had failed, causing metal intrusion in the entire fuel system. The contact was informed that the fuel system needed to be replaced. The contact had received a recall notification of NHTSA Campaign Number: 24V957000 (Fuel system, Diesel), which the contact related to the failure; however the recall remedy parts were not available. The contact stated that the dealer had charged a fee for the repair even though the VIN was included in the recall. The vehicle was being repaired. The manufacturer was made aware of the failure, and a case was filed. The failure mileage was approximately 120,000.

The contact owns a 2020 Ford F-250. The contact stated that while driving 75 MPH, the vehicle made an abnormal knocking sound, and there was excessive smoke coming from the exhaust pipes, before the vehicle shut off. There was no warning light illuminated. The contact was able to pull over to the side of the road. The vehicle failed to restart and was towed to an independent mechanic, where the entire fuel system was replaced due to metal shavings contamination from the high-pressure fuel pump(HPFP). The vehicle was repaired at the owner’s expense. The contact later received notification of NHTSA Campaign Number: 24V957000 (Fuel System, Diesel), which the contact related to the failure. The manufacturer was contacted for reimbursement; however, the manufacturer informed the contact that reimbursement could only be provided once the recall remedy was available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The failure mileage was approximately 45,000.

Sometime sudden decrease of power , f250 truck rpm goes high while parking with engine on and now pitman arm broke off causing no control of steering . Having it push safely off the road , contact dealership but no parts to fix and timely how long it takes to get part to fix problem. 2020 ford f250 start but very unsafe to operate with no control of the steering

when passing another vehicle in a passing zone, with gas pedal fully depressed, there is a 2 or 3 second lag time after releasing the gas pedal before the truck actually stops accelerating. this has happened since I bought the truck brand new from the dealership. first few times it happened it scared the hell out of me. I had to apply the brakes hard in order for it to slow down. I brought it back to the dealer to have it looked at (while having the windsheild wiper recall repaired). the ford mechanic stated that that was just the way it is. he also said others have had this problem as well but there was no factory directive to fix it. The problem still occurs to this day but since i am used to it and expect it It is not as terrifying. but still, this is a obvious safety problem.

door lock actuator on passenger side door has stopped working. cannot unlock or lock the passenger side door from drivers side or outside of passenger side. from inside, driver must reach across vehicle by undoing seat belt, usually with car running, sometimes with transmission in drive, to manually unlock passsenger door for passenger. This has been a common complaint on Ford Forums. It is evidently affecting many trucks. Please put out a recall on this problem. Thanks