2017 FORD MUSTANG Complaints

View complaints related to 2017 FORD MUSTANG. The complaints found here are submitted by actual consumers with first hand experience. There are more than 250 complaints submitted for the 2017 FORD MUSTANG. You can submit your own complaint to the NHTSA or call the Hotline, Monday-Friday 8am to 8pm at (888) 327-4236, TTY: (800) 424-9153.

  • 2017 FORD MUSTANG
    - Abita Springs, LA

    While backing up my rear view camera finally went completely out. I have 3 recalls and it's been way over a year or better all I keep getting is notices that they don't have my parts. Over a year really. Can you help me get my car fixed? I have 4 small grandchildren age 1-9 which 2 of them I pick up daily. I want to make sure I do everything I can to keep them safe. If I was a year late on my car payment they would not wait. I think I have been more than patient.

    Source: NHTSA WEB SITE
  • 2017 FORD MUSTANG
    - Fredericksburg, VA

    See attached document for complaint. There has been no attention paid to this matter. As a result, injuries or death may occur.

    Source: HOTLINE VEHICLE OWNERS QUESTIONNAIRE
  • 2017 FORD MUSTANG
    - San Antonio, TX

    The contact owns a 2017 Ford Mustang. The contact stated that while attempting to reverse, the rearview camera became inoperable. The contact stated that the rearview camera image was intermittently displayed with distorted lines and was unclear. The contact received notifications of NHTSA Campaign Numbers: 25V572000 (Back Over Prevention) and 25V614000 (Seat Belts); however, the parts to perform the recall repairs were not yet available. The local dealer was not contacted. The vehicle was not diagnosed or repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repairs. The manufacturer was made aware of the failure. The contact stated that there had been no failure related to the seat belts. The approximate failure mileage was 200,000.

    Source: HOTLINE VEHICLE OWNERS QUESTIONNAIRE
  • 2017 FORD MUSTANG
    - Baytown, TX

    OVER THE LAST FEW MONTHS MY PASSENGER DOOR COMES AJAR AT HIGHWAY SPEEDS. THIS IS EXTREMELY DANGEROUS. I HAVE NOTED THERE IS A RECALL FOR 2015 MODELS FOR THIS ISSUE ALSO BUILT AT THE FLAT ROCK PLANT. I ALSO NOTE THAT MANY OWNERS OF SIMILAR MODELS ALSO NOT INCLUDED IN THE OPEN RECALL ARE ALSO HAVING THE SAME ISSUES. WHAT IS IT GOING TO TAKE TO MAKE FORD RECALL MORE MODELS? A CHILD FALLING OUT OF A MOVING CAR ON THE HIGHWAY?

    Source: NHTSA WEB SITE
  • 2017 FORD MUSTANG
    - Dallas, TX

    I have being having issues with the doors unlocking not completley but to the second lock, the open door light will show up on the dashboard, at first it was only the passenger side one, then it was both, took it to ford and they did nothing, also for the RECALL 25v572 they told me I had to buy a new camera

    Source: NHTSA WEB SITE
  • 2017 FORD MUSTANG
    - Winter Springs, FL

    The contact owns a 2017 Ford Mustang. The contact stated that while reversing, the rearview camera failed to display an image, compromising the back over prevention system. No warning lights were illuminated. The vehicle was taken to the dealer, who diagnosed a failure with the rear-view camera display and camera. The vehicle was repaired. After investigating the failure, the contact related the failure to NHTSA Campaign Number: 25V572000 (Back Over Prevention). The VIN was included, but parts were not yet available. The manufacturer was not notified of the failure. The failure mileage was unknown.

    Source: HOTLINE VEHICLE OWNERS QUESTIONNAIRE
  • 2017 FORD MUSTANG
    - Searcy, AR

    The contact owns a 2017 Ford Mustang. The contact stated that while reversing, the rearview camera image was distorted. The vehicle was taken to the dealer and repaired under NHTSA Campaign Number: 22V082000 (Back Over Prevention); however, the failure worsened. The contact stated that the rearview camera image was persistently blue while reversing. The local dealer was notified of the failure, but no assistance was provided. The contact later received notification of NHTSA Campaign Number: 25V572000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The local dealer was contacted. The vehicle was not diagnosed or repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the failure, and a case was filed. The failure mileage was approximately 89,000.

    Source: HOTLINE VEHICLE OWNERS QUESTIONNAIRE
  • 2017 FORD MUSTANG
    - Hamilton, OH

    The contact owns a 2017 Ford Mustang. The contact received notifications of NHTSA Campaign Numbers: 25V572000 (BACK OVER PREVENTION) and 25V614000 (SEAT BELTS). However, the parts to do the recall repairs were not yet available. The contact stated that the rearview camera displayed a distorted image while the vehicle was in reverse(R). The contact stated that the failure obstructed the driving visibility, preventing the driver from safely operating the vehicle. The contact stated that a message for the camera failure was displayed on the instrument cluster. The local dealer was not contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The failure mileage was unknown.

    Source: HOTLINE VEHICLE OWNERS QUESTIONNAIRE
  • 2017 FORD MUSTANG
    - Dallas, TX

    Backup camera is showing not available on a 2017 ford mustang with no remedies for 8 years.

    Source: NHTSA WEB SITE
  • 2017 FORD MUSTANG
    - Jersey city , NJ

    I am bringing in my 2017 Ford Mustang EcoBoost Premium due to a serious transmission problem. The vehicle’s 10R60 / 10R80 automatic transmission becomes stuck in Drive/Sport mode and fails to shift properly, which is a significant safety concern since it prevents me from reliably selecting Park or Neutral when needed. I am aware of multiple Ford Technical Service Bulletins (TSBs) and updates related to this transmission family, including but not limited to: - TSB MC-10236680 (May 30, 2023) – 10R60 / 10R80 Automatic Transmission – Harsh/Delayed Engagement And/Or Harsh/Delayed Shift - Identifies PCM/TCM software issues, solenoid strategy concerns, sticking valves in the main control valve body, and axial movement of the CDF clutch cylinder sleeve. - Calls for PCM/TCM reprogramming, adaptive learning drive cycles, and in some cases valve body or clutch component replacement. - TSB 23-2250 (2023) – 10R60/10R80 Harsh/Delayed Shifts / Engagement - Describes corrective procedures including Transmission Accelerated Main Control Break-In routine, adaptive learning cycles, and parts replacement if necessary. - TSB 18-2079 (2018) – 10R80 Harsh/Delayed Shifts, DTC P0711 - Calls for PCM reprogramming to correct transmission shift concerns. Given these official Ford bulletins acknowledge issues with this transmission design, I am requesting that the dealership: 1. Check for and apply all available PCM/TCM software updates as outlined in the above TSBs. 2. Perform adaptive learning drive cycles or Transmission Accelerated Main Control Break-In procedures where applicable. 3. Inspect for valve body or CDF clutch cylinder defects if symptoms persist. 4. Confirm whether this VIN is covered for these repairs under TSB or goodwill consideration, given the clear overlap between my symptoms and Ford’s published bulletins. Because this is a safety issue (vehicle stuck in gear, inability to properly engage Park/Neutral)

    Source: NHTSA WEB SITE