2016 JEEP CHEROKEE Complaints

4WD Service light came on for 2 mins then would turn on off after driving for 3 weeks. Then light came on and would not turn off. Car was taken to independent auto shop and was diagnosed as a bad PTU (power transfer unit). Currently waiting for service at jeep dealership. Service wait is over 3 weeks. Car is stuck in 2wd and has no traction control even if it is stated as being engaged. Front wheels spin on slightest touch from a stop and on turns at speeds over 35 mph.

Approx. 4 weeks ago (6/14/23), the service 4WD service light started to come on/off at random times in my 2016 Jeep Cherokee (upon starting car, putting car in reverse, making a turn and just during driving). On 6/22/23, I took my vehicle to an independent auto shop to see if they could pull a code as to the issue of the service 4W drive light and they could not pull a code to find out what the issue was. I then scheduled an appointment with a Chrysler/Jeep dealership on 7/6/23 to have them investigate the service 4WD light. I was advised that the PTU (Power Transfer Unit) needs to be replaced as metal was found inside. A new PTU has been ordered as of 7/11/23 but was advised that this part is on backorder with no ETA. Upon research, Jeep issued a recall in 2020 for 2016 and 2017 Jeep Cherokees over PTU's affecting 93K vehicles. I believe the internal recall # was 45A and the previous recall # was W47. My 2016 Jeep Cherokee (64K miles) was not a part of said recall. I believe Jeep has a larger problem with the PTU's being used in their vehicles but does not want to admit it. Upon reading the NHTSA Part 573 Safety Recall report - 23V-302 regarding the recall of the PTU's, the safety risk is a loss of motive power which can cause a vehicle to crash without prior warning. My Jeep may not have had the component parts numbers listed in said report but did the recall for the PTU's go deep enough than the part numbers listed? Has Jeep really corrected the issue with their PTU's? At this time, I do not know if I have a safe vehicle to drive. I do not know if I am putting myself and other's at risk for an unknown time period. I am concerned about the safety of driving my vehicle based on the Safety recall report.

I was sitting in park waiting to pump gas and when it was my time to pull forward, I shifted into drive and when I pushed the gas pedal my emergency break was on without me turning it on. About 30 minutes later this happened again. I turned off the vehicle and turned it back on and when I did, the emergency break came on. I am concerned that the emergency break will engage again when put into drive without me knowing.

The contact owns a vehicle 2016 Jeep Cherokee. The contact received notification of NHTSA Campaign Number: 23V338000 (Electrical System, Structure) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was made aware of the issue and confirmed that parts were not yet available. The manufacturer was made aware of the issue and confirmed that parts were not yet available. The contact had not experienced a failure. VIN tool confirms parts not available.

The SRV 4WDR light is still coming on after getting the recall work done on the PTU at the Fox jeep dealership today. A spline was replaced I think. Recall 45A. I believe the whole PTU is bad.

Driving down the road the emergency brake engaged and the car stopped. If there had been a car behind me, this would have created an accident, especially if I had been on the highway. I have read that others have had this problem and there is class action suit.

My "service 4wd" light continues to come on and the shop said my PTU needs replaced but my VIN number isn't part of the recalls so it's going to cost me several thousand dollars.

I just bought my vehicle and I looked it’s been driving funny I took it to the shop they said I need my ptu fixed when I looked it up there is a recall but I don’t understand why my car not involved in the recall when it’s majority jeeps problem right now

My electronic parking brake malfunctioned AGAIN. The vehicle was parked and turned off without activating the parking brake. When I returned to the vehicle and restarted it the parking brake was engaged and would not turn off. In addition, the red ‘brake’ light, and yellow electronic park brake warning light on the dashboard appeared; the odometer was flashing. After several attempts putting the vehicle in D and then R, in effect “rocking it”, the parking brake did disengage. All of the lights remained on. Each time the car was placed back into ‘park’ the parking brake would re-engage, and I needed to go back through the same process to disengage the parking brake.” About the third time, the Parking Brake permanently engaged and could not be disengaged by any means. The car is at the dealer to have the Brake Module replaced for the 3rd time, ALL due to water intrusion. Water is getting in the electrical systems. There’s a recall for a minor water intrusion issue on the lift gate! This is the SAME issue. Please issue a recall before someone is seriously injured or killed. This brake could engage at any moment and easily cause a collision.

I was driving mid day today and I noticed my display on the dash had gone dim as if the headlights had turned on and the dash lights dimmed expecting it to be dark inside. I then got a ding about the auto shutoff when stopped feature not working (this has been dinging for a few years and hasn’t worked since shortly after I got the vehicle in 2018, however it’s been working the last few weeks). I was pulling into a grocery store looking for a spot when all of a sudden the car died. I lost brakes and power steering but luckily was going slow. I turned off the key, put it in park, and it turned right back on. I pulled into a spot and then noticed the engine light on. I’ve read countless forums about this exact issue. Other owners have experienced this since their Jeep was brand new. I’ve had this for 5 years without issues until lately. Prior to the is event, my car was experiencing the same issue with the display dimming. A week prior to the stall today, I was driving around 70 mph when the dash dimmed and I think went completely dark for a bit. I got a ding about the auto shutoff and another stating that 4wd was not available. I tried to turn my headlights on and off but there was nothing. I didn’t have any blinkers either. I pulled over, turned it off and back on and all was fine the rest of the hour-long drive home. I am extremely concerned about it stalling, especially if I’m turning in front of traffic at an intersection. This is not uncommon and other owners are concerned for their safety as well.