2016 JEEP CHEROKEE Complaints

The contact owns a 2016 Jeep Cherokee. The contact stated while driving at 30 MPH, the vehicle was stopped however, the odometer remained operational providing incorrect vehicle information. The contact stated that while accelerating the speedometer kept running and would not stop. The vehicle was taken to the dealer and the mechanic stated that vehicle was experiencing the failure listed in NHTSA Campaign Number: 20V343000 (Power Train) however, the VIN was not included in the recall. The manufacturer was contacted and confirmed that the VIN was not included in the recall. The failure mileage was 75,000.

I have owned my 2016 Jeep Cherokee Limited for a little over two years. I have had it to a dealership twice now for the service shifter light coming on. The first time it was covered under warranty, the second time it was covered by the dealership because it was only a couple months later. It is now coming back on again and the dealership said that if it happened again I would have to pay for it the next time.

Drove car a few minutes and while accelerating the vehicle slowly stopped and all the electrical warning signals went off simultaneously. I was able to push down on the gas pedal, but my car would not accelerate, nor did it sound like engine was running. Car would not power off, but would not move in reverse or drive. Every possible vehicle warning light flashed on the dash, all 5 lights lit up on the gear shifter at the same time, and the windshield wipers turned on even though they were turned off. I have a video of this. Power locks would not lock or unlock car. Power windows would not roll up or down. My media screen flashed an error message. State patrol and our local police department had stop traffic to safely move my car off the roadway to a safe location. My car was towed and the battery had to be disconnected, so vehicle would power off.

I brought in my vehicle for the power train update recall and it triggered my shifter light to come on which now they are saying is the shifter bezel and harness and I have to pay out of pocket for. It was not on prior to the recall software update for the power train

The SVC 4WD (service 4WD drive ) light came on in my 2016 Jeep Cherokee. The Jeep dealership performed diagnosis and the drivetrain control module (DTCM) stored C14A7-97-PUT motor and the component or system operation is obstructed or blocked. They attempted to update the software of the DTCM and it is up to date. The condition persists and their further testing indicates that the internal power transfer unit (PTU) has failed and the vehicle is stuck in 4WD. The vehicle has not been inspected by anyone other than the local jeep dealership, which was on 8/12/2022. The warning message began the week of August 1st and I scheduled the first available service appointment. After some initial research, Jeep had a recall of the PTU for my model year back in 2020. For 2014-2017 Jeep Cherokees where the PTU has not been previously replaced, the auto maker’s recall number is W47 and the National Highway Traffic Safety Administration (NHTSA)’s recall campaign number is 20V343. However, when I checked my VIN number, it stated that I had 0 outstanding recalls against it. It is my understanding that if the power transfer unit (PTU) fails to engage with the transmission, the Cherokee could lose all power while being driven which could result in a crash or injuries.

The contact owns a 2016 Jeep Cherokee. The contact stated that while his daughter was starting the vehicle, the gear shifter was shifted to drive(D) however, the intended gear was not recognized and the vehicle was unable to drive forward. Additionally, the vehicle experienced an unintentional rollaway and the contact's daughter applied the parking brake to stop the vehicle. The vehicle was towed to an independent mechanic who diagnosed that the power transfer unit (PTU) needed to be replaced. The vehicle was not repaired and remained at the independent mechanic. The manufacturer was made aware of the failure. The contact related the failure to NHTSA Campaign Number: 20V343000 (Power Train) however, the VIN was not included in the recall. The failure mileage was approximately 63,000.

January 4, 2022 I was in and accident. My vehicle was in the repair shop for 90 days. The car was repaired and was in good working order. The other person involved in this accident was a 17 year old female. She was not injured.’ On 4/12/22 I took a trip, stopped for gas, attempted to make a left turn in the station but the car malfunctioned ( like a standard transmission) and ran over the center divider. I filled the tank and no problems afterwards. May 31, 2022 as I approached A left turn the car malfunction, (bucked like a stick shift.) I was struck by another vehicle, my car was hit with such force it overturned, spun around the opposite direction and struck a pole. However, it was not a head on collision because my vehicle had no front damage. The airbags deplored and I had serious injuries and a concussion. According to bystanders, the other vehicle speed was approximately 50 miles per hour; the speed limit on this roadway is 35 MPH. It is a dangerous rode with many fatalities this year. The driver in this accident was an 18 year old male. He was not injured. There are no traffic signals for more than one mile. It is a heavily traveled rode and the on and off ramps to I95. I have complained many times to our 911 operator about people speeding, running the red light and stop signs.

While I was at a stand still at a railroad crossing, the rear windshield shattered independently without impact. I did not see any warning lights prior to the incident. I had called the police department and filed a police report as I did not know what happened at the time. No one was injured nor needed medical attention. I was able to drive the 2 minutes home. I had hired an independent mechanic, Safelite, to come to my house and fix the windshield. As he was fixing it he made me aware that my rear defroster on the windshield had overheated and burned the cables which had caused the failure. My grandfather contacted the local dealership and made them aware of the failure. The manufacturer had not been informed of the failure.

1. UNKNOWN component/system failure. It is available for inspection on request. 2. My vehicle will randomly flash an error message while driving "Shift to park and then select desired gear." As this error message is displayed, the engine stops while driving. The car is seemingly forced into neutral. Sometimes it will start again immediately. Sometimes it takes several minutes. It happens completely randomly. It is incredibly dangerous, especially when driving on the highway. I have been lucky that no one has crashed into me yet. 3. I have not had my own vehicle checked for this issues as I am not confident that the solution will be found. I have found hundreds of other Jeep owners (various years/models) in online forums complaining about the same issue. The dealerships and service centers have not been able to find a fix, or even identify what the problem is. 4. No 5. Warning message reads something like: "Shift to park and then select desired gear." This has been appearing randomly while driving. This is an obvious issue with the Jeeps that I am certain Chrysler must be aware of. I have spent a lot of money on this car, and I am terrified to drive my young children to daycare. I am terrified to drive to work. I need this issue investigated, and I need a resolution. Hundreds, if not thousands, of Jeep owners need a resolution.

The contact owns a 2016 Jeep Cherokee. The contact stated that while driving at an undisclosed speed, the Service 4-Wheel Drive message displayed. The vehicle was taken to the dealer where it was diagnosed with powertrain transfer unit (PTU) actuator failure. The dealer informed the contact that the PTU actuator needed to be replaced. The vehicle was not repaired. The manufacturer was made aware of the failure. The failure mileage was approximately 37,000.