2020 JEEP GLADIATOR Complaints

Instrument cluster gauge panel. It doesn't work, and other gladiator models have been recalled for the same issues. Issues with radio, have taken it in many times for same issues and nothing changed, wiring doesn't work properly under seats and on driver door. The green busbox was faulty from factory, can't have glove box in due to interfering with wires behide it.

The contact owns a 2020 Jeep Gladiator. The contact stated that while driving at 30 MPH, the instrument panel turned black. The contact stated that the failure persisted upon restarting the vehicle. The vehicle was not diagnosed or repaired. The manufacturer was not notified of the failure. The failure mileage was 125,000.

The instrument panel cluster has gone blank. It was slowly going bad and eventually went out alltogether.

Our dash board has gone black and we can not see how fast we are going how much fuel we have or the milage or anything else on the dash. The radio still works but nothing else on the dash is working. there are 32,000 other vehicles with recalls on this same issue our truck does not fall under the recall batch but obviously should. this is a major safety issue

My jeep has 140,000 mile engine oil has been changed on time every time. And the engine has cylinders that are missing and it's using antifreeze and riddles like a diesel from time to time. I looked it up and it seems to be a common problem with these engine and there has not been a recall for this. But funny thing is they make a repair kit for this issue. Why has this not been recalled yet it's on all the jeep forms. Even wright ups of fires after a while of driving in this condition.

The instrument panel cluster (IPC) failed. The speedometer, fuel gauge, and other driver information displays no longer function. The vehicle and failed instrument cluster are available for inspection upon request. The failure resulted in loss of critical driving information, including vehicle speed and fuel level. This creates a safety risk because I cannot accurately monitor speed, receive warning indicators, or assess vehicle operating conditions while driving. The issue has been diagnosed by ASE certified shop No warning lamps or messages were displayed prior to the failure. The instrument cluster failed suddenly and without warning.

The contact owns a 2020 Jeep Gladiator. The contact stated that while driving at various speeds, the messages "Gear Shift Reset", and "Loss of Stability Control" were displayed, and the check engine warning light, the brake system warning light and other unknown warning lights were illuminated. Additionally, the power steering feature suddenly failed to operate as designed. The vehicle was taken to the dealer, where it was diagnosed and determined that a wiring harness needed to be replaced. The vehicle was not repaired by the dealer; however, the contact completed the repair himself. The manufacturer was not informed of the failure. The failure mileage was approximately 100,000.

I am submitting a complaint regarding my 2020 Jeep Gladiator, which has exhibited persistent and dangerous steering issues since shortly after I purchased it. The issue is commonly referred to as the "death wobble." Despite 5 separate repair attempts performed by an authorized Jeep/Stellantis dealership, the safety defect continues to occur. This issue is very commonly know to Jeep. I have even been told my the Service Agent I worked with at the dealership that the steering damper is known to be inadequate, but still continually put on the Jeep. The issue started at approximately 25,000 miles, and upon the 5th time bringing it in for the same safety defect, the car is at 92,000 miles. At highway speeds, if the vehicle hits any uneven pavement, the car will begin to shack violently and the vehicle becomes difficult to control. On multiple occasions, the vehicle felt uncontrollable. This creates an extremely unsafe driving condition for me, my family, and other drivers on the road. I have to be hyper focused to avoid any pothole or other change in pavement in order to try and prevent the steering defect to happen. Even when the steering damper has been replaced, the new one can break at any point again, creating a danger every time this vehicle is driven on the highway. I have opened a formal complaint with Jeep as I can no longer use the vehicle in good conscious with my 4-month old daughter. The defect-steering damper breaking can happen anytime, as the exact same part is replaced each time with no successful remedy. I am asking the NHTSA to investigate the steering defect, determine whether a broader safety recall is necessary, assist in compelling Stellantis to provide an appropriate remedy for a vehicle that has undergone multiple unsuccessful repair attempts for a safety-critical defect. I have included all service documents and my communication with Jeep/Stellantis.

The digital instrument cluster in my 2020 Jeep Gladiator has failed. The center display (LCD) went completely black, even though the backlight still glows faintly. This screen typically displays critical information such as vehicle speed, warnings, messages, and alerts. Without this display, I cannot monitor key safety information while driving. The analog gauges still function, but the central digital panel remains blank regardless of ignition mode (RUN or ON). After diagnosing the issue myself, I confirmed power was present at the fuse terminals. I inspected and replaced fuse F36, which was damaged and likely contributed to the display losing power or shorting. I also inspected related fuses F43 and F57 (BCM and IOD power supply), which were intact. This is not an isolated problem. Research shows that other Jeep Gladiator owners (especially 2020 models) are experiencing identical symptoms — black instrument displays, “Push Brake to Start” messages that stay on after shutdown, and modules not entering proper sleep mode. These issues align with the symptoms listed in TSB 08-002-21A, which relates to software and communication faults between the BCM and IPC. Jeep dealership confirmed the failure and quoted $700–$1,000 for full cluster replacement, stating there are no DTC codes and no reflash updates available, and that the cluster must be replaced outright. Jeep has not issued a recall, yet this is clearly a widespread failure affecting visibility and safety of vehicle operation. The problem poses a safety risk to myself and others. I cannot see alerts or diagnostic messages while driving. If this happened at night or during highway travel, it could increase accident risk. Jeep should issue a recall or warranty coverage extension for the instrument cluster failure in affected 2020 Gladiators.

My vehicle has a 3.6 pentastar engine. Around 75,000 miles the check engine light came on. I took it to the dealership to run diagnostics and find the problem. After completing the diagnostics the service tech informed me that is was an issue related to a TSB 09-011-25. This is a major manufacturing issue that causes engine failure. My engine needs to be replaced. This issue affects many vehicles in the Stellantis lineup and should be a recall. They have not made any effort to inform customers of this issue to have it inspected