2024 MAZDA CX-90 Complaints

Steering wheel is sticking at highway speeds. When going around a curve at highway speeds, steering becomes stuck, requiring additional effort to turn and keep vehicle centered in lane. Steering wheel has to be 'broken loose' by pulling it to the direction opposite of the curve. This results in the vehicle bouncing around lanes which is unsafe. The vehicle is currently at the dealer being inspected. No warnings were present.

There is a potential safety risk with the 2024 Mazda CX-90 power steering/lane keep assist. When traveling at moderate speeds steering left into a turn the vehicle jerks to the right. I do not believe this is a direct problem with the lane keep assist as the problem only occurs when in the center of the travel lane and not while on the edge of the road. Lane keep assist works as intended when on the edge of the road or on the center stripped line as I feel a gentle assist again as intended. The hard pulling to the right problem only occurs when steering left into a turn. There are no warning lights on the instrument cluster. The authorized dealer has not been able to reproduce the issue. The issue has been ongoing for at least the past six months.

The steering is inconsistent. Sometimes it requires more or less effort to turn. The steering has been sticking around turns lately. This issue started over a year ago. They applied grease and it made the sticking go away but it has came back after 9 months.

The steering is notchy during turns when the steering wheel is off center, making fine turning adjustments very difficult especially during turns. If any bumps are encountered during a turn or any turning adjustments need to be made, the steering will catch and release and move in a different direction than expected. It requires constant adjustment but the adjustments are not smooth, there is a binding/notchy feeling. When the car is stationary, the it is clearly observed by turning the wheel slowly and feeling the vibrations or observing the continuous jumps in steering wheel. I took the car into the dealer for repair under warranty and they said the steering wheel turns side to side so it's not a problem and refused to further diagnose or make any repairs. I told them it was unsafe to drive the car as is and they said there was nothing wrong with the car so they wouldn't be doing anything more. I asked to show them what was wrong and they said they had done enough and refused to do any more diagnostics. I asked them to look into Safety Recall 6524A and said it feels a lot like what other people describe was wrong with that recall, they said the recall has already been done to this vehicle it doesn't apply, and furthermore that the recall was not an actual issue but just Mazda wanting stiffer steering feel. I now have an appointment with a different dealer to see if they will fix it since the car feels very dangerous to drive as is.

My 2024 Mazda CX-90 continues to have a malfunctioning fuel gauge despite multiple dealer visits and the recall repair (Recall 25V568). The dealer confirmed the issue was fixed, but it is not. The digital fuel gauge does not update in real time. It remains stuck for long distances and only partially recalibrates after restarting the car. For example, on November 5, 2025, I drove more than 60 miles, but the gauge dropped by only about 10 miles. After turning the ignition off and on, the gauge adjusted slightly but still did not reflect the true fuel level. Photos from that day are attached. I have serious safety concerns. The recall notice states: “If the vehicle incorrectly indicates an inaccurate fuel level, there is a chance of unexpectedly running out of fuel while driving. This would result in an engine stall and vehicle being unable to restart, increasing the risk of a crash.” This issue persists even after the recall service was completed, suggesting that the current fix may not fully resolve the defect. This has been an ongoing issue. I visited the dealership again on Nov 5th, 2025.

Upon starting the vehicle, on the dash there was a message "hybrid system malfunction" as well as "engine malfunction have the vehicle inspected". Upon driving it home, the same message appeared 10/24/25 as of today when the car starts now the only message that remains is "engine malfunction have the vehicle inspected" I have an appointment at Mazda on 10/30/25 for the vehicle to be inspected. This vehicle has already been taken to this location for two recalls. Today 10/26/25 I looked up my vin for any new recalls and there is an additional recall. Manufacturer Recall Number7825I NHTSA Recall Number25V-568 Summary When fuel containing ethanol is used, it may react with materials on the sending unit circuit board in the sub-tank. This reaction can create a buildup that interferes with the gauge function that may cause the display on the instrument cluster to read an incorrect fuel level. Safety Risk If the vehicle incorrectly indicates an inaccurate fuel level, there is a risk of running out of fuel while driving. This would result in an engine stall and the vehicle cannot be restarted, increasing the risk of a crash.

The chrome/metal lining/coating on the Parking Break Switch peels off leaving a very sharp metal edge that cuts the finger (with bleeding) when owner tries to enable the parking break.

Steering wheel is very still. I checked online and noticed there is a recall for this problem. I am requesting a recall on my vehicle so that the problem can be resolved.

The steering rack catastrophically failed at highway speeds with no warning or signals from from the car that anything was wrong. I was driving on a curvy highway at 60mph when the steering started to feel a bit weird when turning to the left. At first it felt like irregularities in the road surface or something of that nature. A few moments later, it was clear that something was completely broken as the car would turn to the right completely normally, but had a wildly different amount of feeling and effort required to turn left at highway speeds. When taking a left curve at highway speeds, the steering inconsistently switched from taking several times more effort to turn the wheel (feeling as if components were grinding together) to being lighter than normal, oscillating back and forth between these feelings randomly. I distinctly remember that recall 6524A and the associated stop sale was for "2024 Mazda CX-90 vehicles that have a sudden increase in steering effort while driving" due to "A worm gear in the steering gear assembly may have excessive friction, leading to a sudden increase in the effort required to turn the steering wheel while driving" which said that "This sudden change in steering effort could increase the risk of a crash". I'm suspicious that the failure that I experienced is related to this original issue despite the recall being "resolved" for my 2024 CX-90. I can say with certainty that I'm lucky that I did not crash due to the issue. I'm extremely concerned that this failure poses an imminent safety risk for drivers in other CX-90s. I'm also concerned that Mazda created a new steering rack for later model years unaffected by recall 6524A and provided an ineffective fix to the original problem.

The tires are listed with the manufacturer and were sold by Mazda on a brand new car to me as 65,000 mile tires I was at a little over 17,000 when Mazda said they were “wearing” oddly and this past Monday they said I needed replacement tires. The pros at the dealership stated they are seeing all CX-90 and CX-70 hybrids need tires before 25,000 miles. It is all over the internet that people are being told the extra weight and torque from the motor are wearing tires to quickly leading to needing to replace them well before time and or some folks are having tire failures. The couple at 16,000 miles needing tires was horrible to watch. It is my belief that the issue is a Mazda and falken failure due to a tire being used that is not suitable for the performance for the vehicle leading to a failure in safety. The dealership also stated the mileage had been removed from the tire sheet by Mazda for this particular tire in the last couple weeks so consumers can no longer request the printout for the VIN of their vehicle, but the mileage still remains for CX-5 options at 65,000. Mazda knows it is an issue and needs to find a solution quickly before lives are lost.