2010 MAZDA MAZDA3 Complaints

The AT light came on the dash, added transmission fluid because it was a little low but the light still has not gone off. I think there is an electrical problem within the transmission. It's had shifting issues since purchasing this vehicle. I also have a small child that comes with me to work and I do not want my car to catch on fire while we are in this vehicle.

my girlfriend had bought a car from a dealership in Pennsylvania and the car is registered in Pennsylvania at a dealer called premier world wide auto sales. when she had bought the car all four of the tires i believe should have failed pa safety inspection and the owner of this shop keeps telling me that they pass one hundred percent even though the tires have signs of dry rot all the way around all four tires and would not stop giving me problems and trying to prove me wrong the dot codes show that the tires in the front were 10 years of age and the rear tires at 8 years of age and showing signs of dry rot the tire size all around is 205/55r16 and this is completely unacceptable for a business that has been operating for as long as its been operating because all i can think about is how many other cars has this dealership sold with dry rotting tires nor did they show my girlfriend when she bought the car any of the work that had been done by the shop that had done the inspection prior she was told that everything on this car was great and that there weren't any issues when infact that was not the case i found a leak coming from an engine oil pressure sensor and a cv axle boot torn and flinging grease along with the tires with none of this being disclosed to my girlfriend who bought the car shortly after

NHTSA Complaint Narrative I am filing this complaint regarding a 2010 Mazda 3, VIN [XXX] . The vehicle experiences intermittent transmission control failures, including difficulty shifting out of first gear and warning indicators triggered by vibration. The transmission and transmission control module have already been replaced. The dealership has identified the wiring harness as the cause of the remaining failure. Mazda North American Operations has confirmed that the required wiring harness (BBM9-67-020H) is discontinued and unavailable. However, Mazda has not provided a written determination of whether the known wiring harness recall (engine wiring harness chafing affecting control systems) applies to this VIN, nor confirmed recall completion history. Mazda has advised the customer to seek aftermarket or salvage parts, but has not provided an approved repair remedy or goodwill assistance despite the issue affecting drivability and safety. I am requesting that NHTSA review whether Mazda has met its obligations regarding: 1.recall applicability determination by VIN, and 2.providing an adequate remedy when OEM repair parts are no longer available for a safety-related defect. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

I have reason to believe the dealership I bought my vehicle from rolled back my odometer. Upon checking my carfax information, 12/01/24, the odometer read 161,142, which the dealership did own my vehicle at this time. When I bought this car in April of 2025, the odometer was reading 130,000.

On August 15, 2025, my 2010 Mazda 3 began displaying the ABS warning light intermittently while driving. The ABS system is a critical safety feature, and when the light comes on, I am unsure if the braking system will function properly in an emergency. I scanned the vehicle using a Foxwell diagnostic tool and retrieved the following ABS-related fault codes: C0020:1C-2B – ABS Pump Motor Control Circuit U0425:62-60 – Invalid Data Received from IPC/ABS Control Module U0140:00-28 – Lost Communication with Body Control Module These issues are consistent with Mazda Technical Service Bulletin 04-002/13 (July 17, 2013), which documents ABS pump motor failures caused by poor motor brush contact. This is a serious safety concern because the ABS system fails without warning, leaving the driver and passengers at risk of brake loss in critical conditions. Why this should be investigated: The defect occurs intermittently, making it difficult to predict or reproduce. It matches a known documented defect acknowledged by Mazda in TSB 04-002/13. Other owners have reported similar ABS pump failures in Mazda vehicles of this generation. The failure compromises safe braking and should be treated as a safety defect warranting investigation and possible recall. Action Requested: I am requesting that NHTSA investigate this recurring ABS pump/motor failure in 2010 Mazda 3 vehicles and determine whether a recall should be issued to address this known defect.

The a.b.s pump module is defective in these vehicles. There are tons of people having issues with them. When they fail it happens suddenly resulting in brake failure, power steering failure, the car does not like to shut off, the vehicle will go into "limp mode" and every light on the dash comes on. The part itself is costing close to $1000 u.s.d . With all of tge effected things tgat go with it i believe it can be very dangerous and should be recalled

This vehicle is subject to recall #: 17V-082 referring to a drivers seat lifter link than can break. My car has a broken lifter link, was brought to the dealership and instead of replacing the entire seat adjuster unit like the recall states, they simply installed a reinforcement bracket. When brought back to Med Center Mazda they state it has already been repaired and therefore cannot be repaired again. The vehicle still has a broken seat lifter link.

I purchased two tires from Les Schwab in Molalla, OR on 1/15/25 in which upon them changing the tires they damaged one of my TPMS sensors and they did not replace it. I didn't have a warning light before I went in and now I do and they knowingly did not replace it when TPMS sensor service was part of purchasing the new tires. Instead they quoted me $451.96 to replace the sensors in all 4 tires other than replaced the one they broke. A set of TPMS sensors online cost $28, this is unethical of them to take advantage of consumers like this and they should be held accountable. If I'm not mistake it says in "49 USC 30122(b)" that "Prohibition.-A manufacturer, distributor, dealer, rental company, or motor vehicle repair business may not knowingly make inoperative any part of a device or element of design installed on or in a motor vehicle or motor vehicle equipment in compliance with an applicable motor vehicle safety standard prescribed under this chapter unless the manufacturer, distributor, dealer, rental company, or repair business reasonably believes the vehicle or equipment will not be used (except for testing or a similar purpose during maintenance or repair) when the device or element is inoperative." 205/55 R16

Transmission control module issues. Car was driving on the expressway and wouldn’t shift out of second gear. Engine light and AT light came on. Had to drive slowly on the expressway and get off on the closest exit. Cars were speeding past me and I had to be careful not to get hit. Research and shop shows the 2010 Mazda 3 vehicles have lots of issue with the TCM because they get hot due to there location.

Tha dashboard is melted causing glares on very sunny days and makes driving difficult.