MAZDA Complaints

I am submitting this report to document a persistent ticking noise in my 2022 Mazda CX-5, which appears to be the same issue outlined in Mazda Service Bulletin 01-002/21 for previous model years. This issue is commonly associated with Hydraulic Lash Adjusters (HLAs), which maintain proper valve clearance. The noise occurs most prominently during cold starts and resembles the previously reported HLA ticking sound. Owners of earlier CX-5 models have attributed this issue to air bubbles or insufficient oil supply within the HLAs, with cold weather exacerbating the problem due to restricted oil circulation. Despite Mazda's claim that revisions to the engine components have resolved this issue in newer models, my experience suggests it remains unresolved in the 2022 model year. I am concerned about the long-term reliability of these engine components and the potential repair costs if the issue leads to premature wear or failure. While Mazda has not issued a Technical Service Bulletin (TSB) for the 2022 CX-5, multiple owners have reported similar ticking noises online, indicating that the problem may persist. I have a video recording of the noise but am unable to attach it to this submission. If further investigation is warranted, I would be happy to provide the footage upon request. Additionally, similar reports and video evidence from other owners can be found on online forums, including the CX-5 subreddit, where searching for “clicking” will yield multiple examples. I urge the NHTSA to review this issue, as it may indicate an unresolved mechanical defect affecting the reliability of the 2022 Mazda CX-5’s engine. Please advise on any potential investigations or next steps regarding this matter.

I've noticed ever since the car was new that it had a poor sense of straight ahead especially at freeway speeds. When the lane departure chime was active it would sound constantly{has since been turned off but lighted markers in gauge cluster still fire all the time}. When I take my attention off road for a second to adjust fan speed or temp, the car is close to going into the other lane. Lots of concentration necessary. I've mentioned this to one dealer who checked and adjusted alignment with no improvement and another dealer said they've had other owners of Mazda CX-90's voice the same complaint. There's also a long term test in Motor Trend on a CX-90 that complained about the same issue. I feel there is something wrong here that could be a potential safety problem.

The cylinder head on my 2019 Mazda CX-5 failed prematurely due to a known defect. The vehicle is currently at Fred Beans Mazda in Mechanicsburg, PA, where the issue has been diagnosed and confirmed. The defective component is available for inspection upon request. This failure created a serious safety risk due to an oil leak, which led to smoking from the engine bay and a potential fire hazard. If the oil had ignited, this could have caused severe vehicle damage or injury. Additionally, the failure could lead to a sudden loss of power while driving, increasing the risk of an accident. The problem has been reproduced and confirmed by the dealership, and Mazda has been contacted regarding assistance. They have acknowledged the issue but have not provided full coverage for the repair. Prior to the failure, there were no warning lights or messages. The only symptom was an oil leak, which led to smoke coming from the engine. This issue appears to be a common problem with this model, and Mazda should take responsibility for addressing it properly before it causes serious harm.

I own a 2022 Mazda CX-5 Carbon Edition and have recently noticed a persistent noise coming from the left headlight. The noise resembles a fan or vibrating sound. Coincidentally, this issue started only a month after I bought out the vehicle following the lease expiration. Component/System Failure and Inspection: The issue appears to be caused by a malfunctioning auto-leveling or adaptive headlight motor. The component is still installed in the vehicle and can be inspected upon request by a dealer or manufacturer. Safety Risks: While this issue has not yet caused immediate driving hazards, a malfunctioning headlight system could pose a safety risk if the auto-leveling function fails, leading to improper headlight beam alignment. This could impact nighttime visibility or cause glare for other drivers, increasing the risk of accidents. Reproduction and Confirmation: The problem has not yet been confirmed by a dealer or independent service center in my case, but many other customers have reported similar issues, some of whom have had the component replaced under warranty. Inspection Status: As of now, the vehicle has not yet been inspected by the manufacturer, police, insurance representatives, or other parties. Warning Signs or Symptoms Prior to Failure: No warning lamps, messages, or dashboard alerts appeared before the noise started. The issue began suddenly and has been persistent ever since. I have a video, but it cannot be uploaded in this report.

I motor fan is constantly on when driving. It is 32F to 40F here in Hampton Roads. There is no reason the fan should be on. I have video of the fan running at 29 degrees F. I reported it to my local mazda 3 times. A person I know in another area reported the same problem and her local mazda dealer fixed it.

The front passenger seat warmer caught fire as i was driving the vehicle. No fuse tripped or anything when it over heated. The seat not just melted but actually caught fire and filled the vehicle with smoke.

Rear differential failed at roughly 80,000 miles. Depending on failure, unexpected loss of traction or a locking up of the drivetrain could occur. We were lucky to catch it before then. Dealer confirmed issue with no clear cause. No warning lamps/messages/etc indicated that the part was failing. The only thing we noticed was increased highway noise, which could easily be ignored by someone who is not as aware of good/bad car noises.

During the incident, the vehicle exhibited an uncontrollable malfunction—the steering wheel suddenly jerked sharply to the right while accelerating violently, leaving me unable to steer or brake effectively, the car was looking forward. The car ultimately came to a stop upon colliding with a truck parked diagonally in front of me. After impact, I observed that the front tires remained stuck in a turned-right position, with the steering wheel also locked in that position. This was not an isolated event. Multiple reports from Mazda owners describe similar experiences with their vehicles unexpectedly veering to the right and accelerating without driver input. Given these recurring reports and my own experience, I strongly suspect that a manufacturing defect—whether mechanical, electronic, or software-related—may have contributed to this accident.

The rear camera dose not always display on the LCD screen, likely due to the ghosting issue with the infotainment system which randomly cuts in and out. This poses a safety hazard when backing up. Despite repeated complaints from other owners as well regarding the LCD screen, Mazda will not cover cost of replacing the LCD screen. I had a 2014 Mazda 3 for which there was a recall for the same issue and they covered it. So I don't understand why they won't do it for this vehicle. Being able to see what is behind the vehicle when backing up is a safety concern. I provided date of most recent occurrence, but this has happened multiple times before.

Car was making popping noise, got it checked out at mechanic. Said rear differential had metal in the oil.