MAZDA Complaints

Screen has delamination causing it to have a "ghost touch" it will randomly change stations, change volume, try to make calls and click random buttons. It does all this without having been touched, this has occurred multiple times while driving causing a distraction that could eventually result in a wreck.

The infotainment screen in my Mazda3 developed a large spider crack in the corner. It's available for inspection upon request. It affects my ability to read information on the screen, and partially obstructs my backup camera's image. The problem has been confirmed by both the dealer, who saw the issue firsthand, and Mazda (see Service Alert No.: SA-008/18, issued 02/20/2018 - please note, the spider crack I have is much larger than the ones in the pictures in the Service Alert). There was no warning this issue was going to affect my car, it just happened one day.

I was in the drive thru at a restaurant and had my foot on the brake. After a couple of minutes of sitting with my foot on the brake, I gently pressed the accelerator to slowly move forward. All of a sudden the car sped up on its own like I had floored it. The speed of acceleration threw my head back and the car whipped around the front of the building as that's where I was steering. I braked and it thankfully stopped, but if a car had been in front of me I would have slammed into it. I could have hit a pedestrian. This was very scary and its an obvious safety concern. Mazda needs to look into this issue as I see there are other reports on this website and on the internet by numerous people for the same issue of sudden acceleration by the vehicle on its own.

This began on 10.19.24 and as of 11.03.24 is ongoing and not repaired. On 10/19/24, while I was at a red light, the RPMs on my vehicle went up and down repeatedly. After I arrived at my destination, which was about a half mile away, and put the car in park, the RPMs repeatedly went up and down between 1,000 and 2,000 RPMs and the check engine light came on, and a message displayed saying malfunction - have the vehicle inspected. I spent $100 at my mechanic who could not pinpoint the issue. After I picked up the car, I stopped to get gas and then my battery died. I then decided to take my car to the dealer where I purchased it, Mazda of Roswell. After I put the car in park at the Mazda of Roswell service department, the RPMs started going back and forth between 1,000 and 2,500 RPMs. My car spent 6 days at Mazda of Roswell, where the service dept was unresponsive and my car was never inspected. I then spent $1600 at North Roswell Automotive, only to have the issue appear again after driving less than two miles. I am not sure it is safe to drive a vehicle in which the RPMs are unstable. So far this has only happened when the car is idling or in park. If it happens when the car is in motion I hope I am able to control the vehicle. My car needs service at a Mazda dealer but I need the dealer to be honest with me about what to expect in terms of how long it will take to address the issue. Since this is an engine issue, this issue could be something that causes the car to stall or fail at any time, including while I am in traffic; it could also be electrical, since the battery suddenly died without warning. This would place myself and others on the road in danger. I purchased the battery just over one year ago, so I do not know if there is an issue there.

Mazda call this “ghost touch” it happens when the screen starts to act up like crazy, jumping from different audio sources, Bluetooth lose connection, making unwanted phone calls. Almost like a ghost is touching the screen over and over again.

when driving on the highway in a turn with nobody around with the adaptive cruise set the car it will brake depending on how sharp the turn sometime 5 mph sometimes up to 12 mph like someone just stomped the brake pedal

The engine makes a tapping noise during the cold weather that will only go away after the engine has been fully warmed up. This a known issue for with a TSB sent out. However, the issue persist even after repair. The repair is extremely costly and can reach the thousands. This issue also causes worry there is no knowing if the problem will lead to issues further down.

I am experiencing sharp edge on the Driver Side window up button. The Nicle plating is wearing off and causing safety concern. I have images of the concern. Will send upon request. Mazda is suggesting that I take the vehicle in for diagnostics and service. Their diagnostic cost is extremely high, and I am trying to avoid paying the diagnostic fee. Copy of the contents of my email sent to Mazda. I am experiencing sharp edge on the Driver Side window up button. I am wondering if this can be repaired under warranty or, should I report the abnormally to NHTSA to pursue a possible recall to have this switch replaced. I recall NHTSA had a recall on Hyundai vehicles a few years ago for the same issue. Can you please advise.

I was driving my 2024 CX90 PHEV when a warning about an electrical leakage in the hybrid system was detected. I brought it home and parked in my garage. I called the dealership and they told me to bring it in. When I started to leave, the car would not shift out of park and bricked up. A towing service had to drag it out of my garage. My concern is that there is no limp mode or any way to switch to the gasoline engine when this happened. Had there been a fire in the battery, I would not have been able to get it out of my garage, putting our house and children at risk. Also, had it locked up on a highway, an accident could easily happen. After the dealership dragged it off of the rollback, they couldn’t even get the car to move. They told me that they would have to order special tools to be able to get the car to move. Along with the steering recall that worked for about a month, the steering rack had to be replaced, and the failure of the electrical system, I feel like this car is unsafe to drive. Thank you.

The contact owns a 2018 Mazda Mazda3. The contact stated while reversing, the rearview camera image was flickering and occasionally failed to display an image. The vehicle was taken to the dealer several times. The dealer recommended that the rearview camera be replaced. The vehicle was not repaired. The contact received notification of NHTSA Campaign Number: 23V487000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the failure. The failure mileage was approximately 25,000. VIN tool confirms parts not available.