MAZDA Complaints
View complaints related to MAZDA. The complaints found here are submitted by actual consumers with first hand experience. You can submit your own complaint to the NHTSA or call the Hotline, Monday-Friday 8am to 8pm at (888) 327-4236, TTY: (800) 424-9153.
-
2018 MAZDA CX-5- Philadelphia , PA
I took my car to the dealership because it was leaking oil and coolant. Upon verification, I was informed that my vehicle had a cracked cylinder head. They told me that the repaired will cost me $5500. Unfortunately this is an amount that I do not have. So I reached out to the Mazda Corporate and they told me that there is no repair assistance can be provided and that I should reach out to Mazda Dealership and see if they may accept to put the cost of the repair towards the Good Will Repair. Unfortunately I haven’t been successful with that either. My Mazda Corporate case number is 00450563. This issue is created safety issue with burning engine oils and fume entering the vehicle. This is well known issue with this car model and unfortunately Mazda has made a recall on any of them. While I understand that this may cause Mazda Millions if a recall is put out, it will great to assist with the ones experiencing this issue. Any assistance regarding this matter will be truly appreciated.
Source: NHTSA WEB SITE -
2019 MAZDA CX-5- Elk Grove, CA
The contact owns a 2019 Mazda CX-5. The contact stated while driving at an undisclosed speed, the instrument panel independently switched between features. The contact stated that the failure was persistent. The vehicle was taken to the dealer, however the vehicle was not diagnosed. The contact was requested to pay a diagnostic fee, the contact declined. In addition, the contact was informed that the failure was a known failure with the vehicle. The manufacturer was not made aware of the failure. The failure mileage was approximately 35,000.
Source: HOTLINE VEHICLE OWNERS QUESTIONNAIRE -
2024 MAZDA CX-90- Allen, TX
There is a recurrent steering wheel issue. The issue was first addressed during the national recall campaign 6524A / NHTSA 24V-022 where it received the recall repair. The exact same dangerous issue has returned. The issue currently, is best described as having to wrestle with the steering wheel at all speeds when minor corrections are needed. That is, the steering becomes binding, catching, and creating a ratcheting sensation in both low speed maneuvers and at minor corrections during highway driving. This constant position "sticking" of the steering wheel requires me to physically pull and jerk the wheel to break it free from its position; hence the "wrestling" analogy. The vehicle was not received immediately at the dealership due to "work backlog". It is pending current review of the recurence of this symptoms.
Source: NHTSA WEB SITE -
2024 MAZDA CX-90- Cambridge, OH
The contact leases a 2024 Mazda CX-90. The contact stated that on two separate occasions while stopped and the ON/OFF feature was activated, the vehicle shut off. The contact stated that several warning messages including the "Engine Malfunction ", "Charging System Malfunction", and "Eye Active Sense System Malfunction" appeared on the instrument panel. The contact then stated that she had received a recall notice for NHTSA Campaign Number: 24V816000( Electrical System, Power Train). The vehicle was taken to the dealer and the vehicle was serviced. The contact stated that while driving at a 20 MPH, the vehicle shut off as the previous warning messages appeared on the instrument panel. The contact managed to restart the vehicle; however, an audible beeping sound persisted. Due to the failure, the contact pulled over and had the vehicle towed to the dealer. The dealer kept the vehicle for nearly two weeks where they replaced the mild hybrid battery. Despite the latest repair, the contact expressed concern about the vehicle being that the failure occurred while her two young children were in the vehicle. The manufacturer was notified of the failure in a letter and requested to have them replace the vehicle under her lease. The manufacturer denied the contact's request and closed the case. The failure mileage was approximately 31,000.
Source: HOTLINE VEHICLE OWNERS QUESTIONNAIRE -
2011 MAZDA CX-7- CARBONDALE, IL
My wheel on front driver's side is wobbly and I just decided to look up for any recalls and I'm lucky we didn't have a major accident I drive the interstate almost daily also I want to report that my door handles have had to be replaced 6 times since we've bought the car in 2019
Source: NHTSA WEB SITE -
-
2024 MAZDA CX-90- Pharr, TX
Vehicle steering issues. Steering wheel binds, jerks, increased effort while turning.
Source: NHTSA WEB SITE -
2025 MAZDA CX-5- Medford , MA
Description of Safety Defect: The driver-side exterior rearview mirror vibrates excessively, escalating into a violent shake depending on vehicle speed, crosswinds, and road surfaces. The issue is highly pronounced at highway speeds (65+ mph) and deteriorates aggressively as speed increases, particularly on open, wind-swept highways with like MA-3. ?The resulting violent vibration causes severe visual distortion, creating a blurred, "low-resolution" image that makes it incredibly difficult to accurately judge the distance, speed, and presence of overtaking vehicles. When checking the driver-side blind spot, this rapid blurring induces sudden, brief physical dizziness and vertigo, posing an immediate safety hazard during high-speed lane changes. The passenger-side mirror remains perfectly stable and clear under identical driving and road conditions. ?Attempts to Correct / Dealer History: The vehicle has been taken to an authorized dealership (Tulley Mazda, Nashua, NH) twice for this specific issue: ?On 03/18/2026 (Mileage: 5,862), Repair Order #XXX/1 noted the complaint. The technician verified the vibration on a road test but dismissed it as a "normal characteristic of the vehicle". ?On 04/21/2026 (Mileage: 6,846), Repair Order #XXX was opened because the condition worsened and began occurring at lower speeds. A ride-along was conducted, and the Shop Foreman confirmed the defect. Upon mirror disassembly, the technician found "loose internal components causing the issue". ?Current Status: Under warranty, the dealership replaced the body door mirror assembly (Part KJL1-69-181C) and the mirror glass/holder (Part TK71-69-1G7). However, the violent shaking remains completely unresolved and continues to worsen at high speeds. The dealership is now refusing further diagnostic or repair work, claiming the vehicle is "within spec," despite the persistent visual distortion and subsequent driver vertigo. No crash yet, but the defect is serious safety concern.
Source: NHTSA WEB SITE -
2018 MAZDA CX-5- San Francisco, CA
Like many other complaints. My 2018 Mazda cx5 GT is having the same issue with the cracked cylinder head. I only have about 36-38k mileage on it ( I forgot the exact). Mazda dealership will not cover the cost. NEVER had an accident to the front and only one accident to the back when I got rear ended in 2019. If this is a wide spread issue, why is this not a recall? and why is it only the turbo engine gets extended warranty? The repair cost right now approximately $9,500. I never do any maintenance at Mazda so I doubt they will give me the good will assistance but I am still waiting for an answer. I hope NHSTA will do something because this issue will continue with all other owners that have the same year model.
Source: NHTSA WEB SITE -
2025 MAZDA CX-70- Norfolk, VA
The steering wheel on the car will often get stuck and not return to the normal position when turning. Happens at low speeds on on/off ramps and at interstate speeds when the road slightly shifts. “Jerking” the steering wheel is often required to get the car to drive straight and return to normal driving position.
Source: NHTSA WEB SITE -
2024 MAZDA CX-30- Greer, SC
[XXX] fuel door assembly has come loose from body. It looks like the clips that hold it in place have become worn or loose by the weight of the gas nozzle or by the fact that the gas door will not close correctly and car wash machine has made it looser and it appears to not shut all the way, and the body colored panel has fallen off as a result and when you pump gas, the assembly moves may be possibly causing it to leak gasoline if the seal or gasket becomes dislodged because of the loose clips that hold assembly to the body panel. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Source: NHTSA WEB SITE