2018 RAM 1500 Complaints

The contact's father owns a 2018 Ram 1500. The contact stated that while driving 20 MPH, an abnormal odor was detected and a loud sound was heard coming from the vehicle. The contact pulled over and inspected under the hood. She noticed that the battery had exploded, with cracks on the casing and battery acid leakage. The check engine, battery, and ABS warning lights were illuminated. The vehicle was towed to the dealer where it was diagnosed that no codes appeared after they replaced the battery. The vehicle was not repaired and remained at the dealer. Prior to the failure, the vehicle had a jumpstart from Triple A towing company. The manufacturer was made aware of the failure. The failure mileage was approximately 58,800.

The contact's husband owned a 2018 Ram 1500. Two years ago, the contact received a notification for NHTSA Campaign Number: 19V757000 (Engine and Engine Cooling); however, the parts for the repair were unavailable. At the time, the dealer had been notified about the recall and confirmed that parts were not yet available. A year later, the dealer called that contact to inform her and that parts slowly coming to their dealer and that she had been placed on a waiting list for the recall repair. Recently, the contact stated that while her husband was driving at 65 MPH, the vehicle failed to accelerate upon depression of the accelerator pedal; two unknown warning lights also appeared on the instrument panel. As her husband pulled over, a white color smoke began to emit from the engine. Upon lifting up the engine's hood, her husband saw flames coming from under the engine. Her husband immediately called 911 and while on the phone with the dispatcher, the vehicle became engulfed in flames. The fire department arrived ten minutes later and extinguished the fire. The contact was uncertain if a fire report was filed; no injuries were reported. The vehicle was towed to two independent mechanics where it was later deemed a total loss. The manufacturer had been notified of the failure and a case was filed. The contact stated that the manufacturer had exceeded a reasonable amount of time for the repair. The failure mileage was approximately 66,000. Parts distribution disconnect.

The Touch Screen 8.4 Uconnect Screen is Delaminating and has Phantom Touches with Render the Screen useless and it takes away from the ability to use the screen and the SOS or Assist feature it has incase of any emergencies.

The contact owns a 2018 Ram 1500. The contact stated while in reverse at approximately 2 MPH, the backup camera screen would go blank, or the image would become pixilated. The contact had not noticed any warning lights. The contact had taken the vehicle to a local dealer, where it was diagnosed and determined that the navigation and information computer screen needed to be replaced. The vehicle was not repaired. The manufacturer had been informed of the failure. The failure mileage was approximately 68,000.

Uconnect 8.4 graphic panel (radio, navigation, climate control, etc...) is de-laminating causing random systems outcomes and dangerous driver distractions. Online research shows this is caused by some chemical between the outer touch sensitive screen and inner radio screen itself leaking out the bottom of the assembly. I'm concerned about what this chemical is and its toxicity to humans both breathing it or potentially touching it. This is a well know and common deficiency, especially within 2018 models, which the manufacturer will only address if still under warranty (all 2018 Chrysler vehicles are past the 3 year/36,000 mile warranty period.)

As I'm driving my truck there is a error message that keeps popping on on the vehicle information system. I can shut the information system off and I can't get rid of the error message. this is distracting me while I'm driving.

The contact owns a 2018 Ram 1500. The contact stated that while driving at approximately 55 MPH, there was an abnormal noise coming from the vehicle. The low oil pressure warning light was illuminated. The contact stated that after turning off the vehicle, the vehicle was unable to be restarted. The vehicle was towed to an independent dealer, where it was diagnosed that the bearing on the crankshaft was loose and causing damage to the engine. The vehicle was not repaired. The manufacturer was notified of the failure. The approximate failure mileage was 50,000.

while driving on the highway with cruise control engaged at 60 mph there was a loud clunk sound and the truck immediately decelerated. The cruise control had disengaged and the truck seemed to go into limp home mode and the check engine light came on. I pulled to the side of the road and shut the engine off. I looked under the truck to see if I had run over something and checked the drive line for damage but found none. Restarting the engine took considerably more crank time than normal. While driving home the truck would not accelerate normally and top speed uphill was 19-23 mph depending on the climb with rpm around 3000 before what felt like fuel cut off and immediate deceleration until rpm was dropped to around 2000. The 5 hour trip home turned into an 8 hour trip. The check engine DTC is P0336 (crank position sensor A circuit range/performance). There is a recall W58 (20V475000) for software update for loss of crankshaft position sensor signal. This update substitutes the camshaft position sensor signal for the lost crankshaft signal. There is a known defect with the tone ring on the 3.0 eco diesel. The magnetic material on the tone ring delaminates. The software update does not fix the loss of crankshaft signal. The engine now has excessive crank time before starting. There is an a noticeable aceleration lag and the truck struggles on uphill grades. The cruise control is now inoperable with the crank signal DTC is permanent until the tone ring is replaced. My repair shop checked for parts avaiability and found dodge has 22,000 in stock which leads me to believe that they not only know about the problem but also know the only true fix is to replace the failed tone ring. The truck is unsafe to drive until the failed tone ring is replaced.

Instrument panel controlling radio, HVAC, back up camera, hands free devices, etc is faulty. It turns on/off by itself, glitches to many operations several times a second. Can not be turned off. Extremely distracting. The panel also gets very hot - worried about fire hazard.

While driving on at 75 mph with the cruise control on I went to reset the MPG and the screen was blank. Started pressing the left/right arrows and the entire cluster restarts (power cycles). I was able to repeat it several more times and capture it on film, link below. https://www.youtube.com/watch?v=saQ_5ezRV-0