2018 RAM 1500 Complaints

View complaints related to 2018 RAM 1500. The complaints found here are submitted by actual consumers with first hand experience. There are more than 640 complaints submitted for the 2018 RAM 1500. You can submit your own complaint to the NHTSA or call the Hotline, Monday-Friday 8am to 8pm at (888) 327-4236, TTY: (800) 424-9153.

  • 2018 RAM 1500
    - Jeffersonville, IN

    The contact owns a 2018 Ram 1500. The contact stated that the front passenger’s side seat belt failed to latch as needed. The contact stated that the seat belt would latch after several attempts were made. The vehicle was not diagnosed. Neither the dealer nor the manufacturer was notified of the failure. The vehicle was not repaired. The failure mileage was approximately 48,000.

    Source: HOTLINE VEHICLE OWNERS QUESTIONNAIRE
  • 2018 RAM 1500
    - machesney park, IL

    8.4 inch Uconnect display has intermittent "ghost" pressing buttons. This causes the radio station to change, settings to change, back up camera to activate for minutes at a time, and now phone calls are being terminated. I am in Illinois and we have a "hands free" law for cellular phone use. The phone calls being randomly terminated could interrupt emergency communications. This random termination of phone calls is a huge distraction because you look at the radio display to see what is going on and then try to interact with the display to fix it. The root cause of this is the bubbling or delamination of the 8.4 inch Uconnect display. This delamination has been a known issue since 2013. My delamination issues are getting worse. I continue to report these issues to Uconnect, but they tell me there is nothing they can do.

    Source: NHTSA WEB SITE
  • 2018 RAM 1500
    - PLAINFIELD, IN

    Navigation system started jumping around different screens while traveling in an unknown area. It almost caused an accident several times from being startled from not knowing where I was going and from losing visibility of the upcoming Road. I have video of this happening.

    Source: NHTSA WEB SITE
  • 2018 RAM 1500
    - Hilo, HI

    The backup camera in this truck has intermittently blacked out for over a year. The have changed several parts and the system still has problems and doesn’t work right. While reversing, the camera will black out or the picture will become distorted.

    Source: NHTSA WEB SITE
  • 2018 RAM 1500
    - Machesney Park, IL

    Uconnect 8.4 inch display is bubbling or delaminating. This morning I was driving thru city traffic, about 5 miles total. The "ghost" was pushing buttons on the display changing radio stations, settings etc. Suddenly the BACK UP CAMERA CAME ON. Then it would turn off. I started timing the on time, and it lasted from 2 minutes to 4 minutes. This would randomly happen. VERY distracting and could lead to an accident. I consulted the google and learned there was a recall for something similar of the back up camera staying on too long when shifting out of reverse. NHTSA #20V191000. What has happened to me is far worse than that recall.

    Source: NHTSA WEB SITE
  • 2018 RAM 1500
    - Machesney Park, IL

    The 8.4 inch Uconnect display acts like a ghost is pressing buttons. The radio will randomly change stations. Other modes - settings, navigation, etc will randomly be selected. When this happens cannot change any climate controls. Back up camera randomly gets activated. This is a SAFETY issue as it causes a distraction when driving. The display randomly changing is also a distraction. Researching the internet, this is not a new issue and is known. The display is "bubbling" or delaminating causing the ghosting of pressed buttons. I am out of the warranty by 6 months and am told this is not covered. I have called Uconnect (case #80418507) and they stated they cannot do anything until a dealer determines the actual problem, which I will have to pay for. I should NOT have to pay for this. This bubbling or delamination issue is well known and should be covered under a recall or warranty. This started last fall but I thought it was caused by a dirty screen. This has gradually gotten worse and happens more often.

    Source: NHTSA WEB SITE
  • 2018 RAM 1500
    - Kansas City, MO

    The screen, used for HVAC functions, seat heating/cooling, radio, hands-free bluetooth, backup camera, etc, becoming delaminated. Screen will randomly think that it is being pressed and disconnect phone calls, modify HVAC levels, and change radio stations. This is becoming a widely recognized issue across several vehicles that use the Uconnect 8.4 inch touchscreen (CDJR vehicles). Please see: https://www.challengertalk.com/threads/uconnect-touch-screen-delamination-out-of-warranty.687807 https://www.ramforumz.com/threads/uconnect-8-4-screen-delamination.274234 and many others about this SAFETY critical issue.

    Source: NHTSA WEB SITE
  • 2018 RAM 1500
    - Jacksonville, FL

    The contact owns a 2018 Ram 1500. The contact stated that the defroster failed to defrost the windows and she was unable to visually see the roadway. The contact stated no warning light was illuminated. The contact took the vehicle to the local dealer where it was diagnosed with needing the radio assembly to be replaced. The vehicle was not repaired but was pending repairs. The manufacturer had been informed of the failure. The failure mileage was approximately 85,000.

    Source: HOTLINE VEHICLE OWNERS QUESTIONNAIRE
  • 2018 RAM 1500
    - Roseville, CA

    The contact owns a 2018 Ram 1500. The contact received notification of NHTSA Campaign Number: 19V757000 (Engine and Engine Cooling) however, the part to do the recall repair was unavailable. The contact took the vehicle to the local dealer and it was confirmed that the part was not available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. Parts distribution disconnect.

    Source: HOTLINE VEHICLE OWNERS QUESTIONNAIRE
  • 2018 RAM 1500
    - PORTSMOUTH, VA

    1. Electric Power Steering (EPS) failure causes sporadic or no power steering. 2. I was driving when the steering was sporadic causing oversteering and then when it totally went out the vehicle the vehicle was very hard to steer. 3. Dealer has the truck now for diagnosis. This is a known component manufactures defect. 4. About 3 weeks before steering went out there was a clicking noise when turning. I contacted the dealer and scheduled an appointment. I spoke to a technician, at that time, and was told the noise was normal and no appointment was necessary. Appointment was subsequently canceled, 3 weeks later the failure occurred. Many of the blogs online show this issue to be a safety problem. Manufactures defect. Please address this issue it is a safety issue to everyone who has EPS.

    Source: NHTSA WEB SITE