2017 RAM 2500 Complaints

The contact owns a 2017 Ram 2500. The contact received notification of NHTSA Campaign Number: 24V896000 (Service Brakes, Hydraulic); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated that the ABS warning light was illuminated. The dealer was contacted but was unable to provide a date for parts availability. The manufacturer was notified of the issue and confirmed that the part was not yet available for the recall repair. The failure mileage was approximately 21,000.

My 2017 Ram 2500, 6.4L Hemi experiences warning lights which I'm told is caused by intermittent PCM failure. I'm told this can cause the truck to stall while in motion, refuse to start, or enter "limp mode". This amounts to a possible unsafe condition that can put myself and passengers at risk of property damage, bodily injury or worse. I brought the truck to Priority Automotive of Westerly, LLC on March 9, 2026 for diagnosis. Their diagnosis (attached) recommended replacing the PCM to correct (possibly), "...intermittent internal short(s)". Cost of the repair is $2,012.42. Subsequently, I contacted customer care at Stellantis (866-726-4636) and was given Case #[XXX]. I was told to make an appointment at the aforementioned dealership and call them the day before the appointment, so they could send a representative to the dealership for examination. I did exactly that to no avail. No one from Stellantis even contacted the dealership on the appointment date. I called them to find out what happened, only to find out (from a supervisor) that they are not offering assistance in the matter. Additionally, the truck is currently under recall #C4B/NHTSA 24V-896 (PCM related) and, to-date, I'm told the part is still not available after more than a year since the recall. I've owned Dodge Rams for over 27 years and find the situation unsafe and totally unacceptable. I'm also aware that many other owners of the 2017 Ram 2500 6.4L experience PCM/ECM issues, causing no-start conditions or stalling, and have reported them alongside braking system complaints. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

This CHEAP fix is abhorrent! It calls for welding an adjustable part of the steering linkage rendering it non- adjustable when having the front end aligned in the future. Not to mention the effect of welding, potentially causing a problem with the integrity of the metal. The correct fix for this SAFETY issue is to REPLACE this steering linkage component, the entire Drag Link! NOT do a "back yard, shade tree mechanic" weld job on the steering linkage of all things! I am appalled that NHTSA approved such a thing. PLEASE revisit this issue and do the right thing. Require Chrysler (FCA US LLC) to REPLACE this defective part with the proper part. Note.... Chrysler is not welding the nuts on the drag links on trucks coming off the assembly line! They are coming off with proper, safe, adjustable drag links! I contacted FCA and they said they cannot redo the recall because it's out of the window to get it repaired again. This is not a safe fix. The recall says after this welding, the vehicle can still get a proper alignment from dealer, which is not true. I contacted the dealer and they said I should contact FCA, but that sent me back to my original issue. I can't get an alignment even though the recall fix says I can. I dealer refuses to do it. I bought this truck used from the dealer and they wouldn't fix it at the time either. I pull a fifth wheel trailer with my truck and I need an alignment. This recall weld fix is just not right, a cheap fix for a long-term problem and very unsafe. Please help and please point me in the right direction. Thank you

The contact owns a 2017 Ram 2500. The contact stated that while driving at an undisclosed speed, the brake pedal was depressed; however, the vehicle failed to stop as intended. The contact stated that the vehicle skidded for approximately 25 feet. Several unknown warning lights were illuminated. The contact stated that due to the failure, another vehicle was almost rear-ended. The vehicle was taken to the dealer, where it was diagnosed with HCU failure. The contact was informed that the HCU needed to be replaced. The vehicle was not repaired. The contact was informed that parts were not available to repair the vehicle. The contact received notification of NHTSA Campaign Number: 24V896000 (Service Brakes, Hydraulic); however, the parts to do the recall repair were not yet available. The manufacturer was made aware of the failure and a case was filed. The failure mileage was approximately 78,000.

The contact's husband owns a 2017 Ram 2500. The contact discovered that the vehicle was included in NHTSA Campaign Number: 24V896000 (Service Brakes, Hydraulic); however, the part to do the recall repair was not yet available. The local dealer was made aware of the issue and confirmed that parts were not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The ABS and "BRAKE" warning lights were illuminated on the instrument panel. The contact stated that due to the brake warning light being illuminated, the vehicle would not be able to pass an upcoming State Inspection. The manufacturer was made aware of the issue. The failure mileage was approximately 110,000.

Nov 27, 2024 Manufacturer Recall Number: C4B - NHTSA Recall Number: 24V-896 Recall Status: Recall Incomplete, remedy not yet available from RAM dealer as they say the parts are still not available to remedy this safety recall for my vehicle. How much longer do i have to wait for this to be fixed? It has been 1 year and 3 months now since recall was issued.

The contact owns a 2017 Ram 2500. The contact received notification of NHTSA Campaign Number: 24V896000 (SERVICE BRAKES, HYDRAULIC); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure.

ABS System Module/System Brake Failure Unsafe and Can not drive anymore The problem was produced December 5, 2024 and they have refused to fix the recall. The problem has been inspected by several local dealerships as well as team Dodge ram and Chrysler Corporation There is warning lights that actually accelerate and go off every 60 seconds as you’re driving. This has been going on for years and it was like this four days to five days after we drove off the car lot and we paid $40,000 for this truck..

Nov 27,2024 Manufacturer Recall Number: C4B NHTSA Recall Number: 24V-896 Recall Status: Recall Incomplete, remedy not yet available RAM unable to remedy this safety recall for my vehicle

The HCU for my truck failed and was replaced 6/25/2021. It failed again 12/2024 but before it could be replaced a recal for the HCU came out with the warning "The loss of ABS/ESC/Traction control may cause a vehicle crash without prior warning" Now the warning light keeps coming on and going off with the alarm sound as I drive. It also turns off the cruise control. This has been going on for well over a year with no date for a fix of something that can cause a crash without prior warning. There doesnt seem to be any urgency to fix something that can cause such a big problem. I have no choice other than to keep driving my truck hoping for the best. Any help with this is most appreciated. Thank you for your time, G. May