2018 RAM 3500 Complaints

FLASHING ABS AND TRACTION CONTROL LIGHTS WHILE IN MOTION AT RANDOM TIMES AND WHEN APPLYING BRAKES

CRUISE CONTROL INTERMITTENT FUNCTION...MAY NOT TURN ON, MAY NOT TURN OFF, MAY NOT DISCONNECT OR CANCEL AT SPEED, MAY NOT CANCEL AT SPEED WITH BRAKE PEDAL. BOUGHT THE TRUCK IN MARCH, 2020. NO PROBLEMS UNTIL JUNE 12, 2020, WHEN IT FAILED TO WORK CONSISTENTLY. DEALER WANTS $150 TO DIAGNOSE, EVEN THOUGH IT WAS REPORTED TO FCA IN MAY OF 2018. WEB INFORMATION SHOWS WIDESPREAD PROBLEMS...2 LINKS I FOUND: HTTPS://WWW.EQUIPMENTWORLD.COM/RAM-TRUCKS-CAUGHT-UP-IN-LARGE-FCA-RECALL-OVER-DEFECTIVE-CRUISE-CONTROL/ HTTPS://WWW.RAMFORUM.COM/THREADS/CRUISE-CONTROL-STOPPED-WORKING.66362/ I BOUGHT THE TRUCK WITH 50K MILES, NOW HAS 53K MILES. *TR

TL* THE CONTACT OWNS A 2018 RAM 3500. THE CONTACT RECEIVED NOTIFICATION OF NHTSA CAMPAIGN NUMBER: 20V036000 (POWER TRAIN) HOWEVER, THE PART TO DO THE RECALL REPAIR WAS UNAVAILABLE. THE CONTACT CALLED TO AUTONATION CHRYSLER DODGE JEEP RAM ROSEVILLE (200 AUTOMALL DR, ROSEVILLE, CA 95661; (916) 467-8055) WHERE IT WAS CONFIRMED THAT THE PART WAS NOT AVAILABLE. THE CONTACT STATED THAT THE MANUFACTURER EXCEEDED A REASONABLE AMOUNT OF TIME FOR THE RECALL REPAIR. THE MANUFACTURER WAS NOT MADE AWARE OF THE ISSUE. THE CONTACT HAD NOT EXPERIENCED A FAILURE. PARTS DISTRIBUTION DISCONNECT.*DT*JB THE CONSUMER STATED DUE TO THE ADVANCED CHEMISTRY OF TODAY'S COOLANT, DRIVING FOR SEVERAL THOUSANDS MILES THE PLUGS SLOWLY BECAME FOULED WITHOUT WARNING. *JS

ON MULTIPLE OCCASIONS THE SHIFT ARM WOULD NOT MOVE WHILE VEHICLE WAS IN PARK AND FOOT BRAKE WAS DEPRESSED. SEEMED LIKE THE SAFETY DEVICE THAT PREVENTS AN AUTOMATIC SHIFTING ARM FROM SLIPPING OUT OF PARK WITHOUT BRAKE DEPRESSED DID NOT RELEASE. VEHICLE WAS ON FLAT LEVEL GROUND, THE ONLY WAY TO CORRECT PROBLEM REQUIRED SHUTTING VEHICLE OFF AND THEN RESTARTING. ONCE THIS PROCESS WAS CONDUCTED THE SAFETY DEVICE OPERATED NORMALLY. IN THE THREE YEARS OF OWNERSHIP THIS HAS HAPPENED THREE TIMES AND EACH TIME MY RESOLUTION WORKED. *TR

I BOUGHT THIS BRAND NEW 2018 DODGE IN JANUARY OF 2019 AT THE TIME OF THE INCIDENT IT HAS FOUR THOUSAND MILES ON IT AND THE INCIDENT HAPPENED ON APRIL 30TH 2020. THE FRONT END BEGAN TO VIBRATE . I PULLED INTO A TIRE SHOP AND THEY ESTABLISH THAT THE FRONT LEFT STEER TIRE WAS CUPPING. IT IS A NEXEN TIRE THAT CAME ON THE BRAND NEW VEHICLE THAT ONLY HAD 4000 MILES ON IT. THE SPARE TIRE DID THE SAME THING IN ONLY 60 MILES, ALSO BRAND NEW TIRE THAT CAME WITH BRAND NEW TRUCK. I TOOK BOTH TIRES TO A CERTIFIED NEXT ENTIRE DEALERSHIP AND THEY TESTED THEM FOR ME AND CIRCLES ALL OF THE AREAS ON BOTH TIRES THAT WERE CUPPED CAUSING THE VEHICLE TO VIBRATE. DODGE DEALERSHIP AND THE TIRE WARRANTY PEOPLE ARE ARGUING AND I'M STUCK IN THE MIDDLE AND I WANT NEW STEER TIRES AND A NEW SPARE AND DODGE STILL TRYING TO FIGURE OUT HOW THEY'RE GOING TO HANDLE THIS. THE FACT OF THE MATTER IS FAULTY TIRES. NEXEN ROADIANS LT235/80R17, 4000 MILES ON A 2018 BRAND NEW DODGE 1TON DIESEL. *TR

TL* THE CONTACT OWNS A 2018 RAM 3500. THE CONTACT RECEIVED NOTIFICATION OF NHTSA CAMPAIGN NUMBER: 19V818000 (EQUIPMENT, ENGINE AND ENGINE COOLING) AND 20V036000 (POWER TRAIN) HOWEVER, THE PART TO THE RECALL REPAIR WAS NOT AVAILABLE. THE CONTACT STATED THAT THE MANUFACTURER EXCEEDED A REASONABLE AMOUNT OF TIME FOR THE RECALL REPAIR. THE CONTACT STATED THAT SCOTT ROBINSON CHRYSLER DODGE JEEP RAM LOCATED AT (20900 HAWTHORNE BLVD, TORRANCE, CA 90503) EXCEEDED A REASONABLE AMOUNT OF TIME FOR THE RECALL REPAIR. THE MANUFACTURER WAS MADE AWARE OF THE ISSUE. THE CONTACT HAD NOT EXPERIENCED A FAILURE. PARTS DISTRIBUTION DISCONNECT.

I PURCHASED A NEW 2018 RAM 3500 THAT HAD SAFETY RECALL V06/NHTSA 19V-021 WORK PERFORMED ON IT PRIOR TO ME PURCHASING THE TRUCK. I WAS NOT MADE AWARE OF THIS PRIOR TO MY PURCHASE AND I'M EXTREMELY CONCERNED ABOUT THE "FIX" THAT RAM HAS DONE. THE RECALL CALLS FOR THE WELDING OF STEERING COMPONENTS RATHER THAN THE REPLACEMENT OF THE DEFECTIVE PARTS. NOW THAT THE WELDING HAS BEEN DONE I HAVE BEEN TOLD I WILL NO LONGER BE ABLE TO HAVE THE FRONT TIRES ALIGNED WITHOUT CUTTING THE WELDS FIRST IN ORDER TO MAKE THE NECESSARY ADJUSTMENTS. THEN THE WELDING PROCEDURE WILL NEED TO BE PERFORMED AGAIN I GUESS. THE CURRENT SAFETY RECALL SHOULD BE UPDATED TO REQUIRE THE REPLACEMENT OF THE DEFECTIVE STEERING PARTS.

WHEN HITTING BUMPS OR UNEVEN PAVEMENT AT SPEEDS ABOVE 50 MPH THE TRUCK WILL SOMETIMES START SHUDDERING AND VIBRATING VIOLENTLY ALMOST CAUSING TOTAL LOSS OF CONTROL. THE ONLY WAY TO STOP IT IS TO COME TO A COMPLETE STOP. IT DOES NOT DO IT ON ALL BUMPS OR ROUGH ROADS. IT SEEMS TO BE MORE FREQUENT WHEN HITTING A BUMP IN A CURVE OR HITTING A BUMP WITH FIRST ONE WHEEL THEN THE OPPOSITE WHEEL HITS ONE. IT DOES THIS LOADED OR UNLOADED AND HAS DONE IT WHILE PULLING A 16000 POUND FIFTH WHEEL RV. THE TRUCK ONLY HAS 16000 MILES ON IT AND HAS DONE IT ABOUT 10 TIMES SINCE IT WAS PURCHASED. I HAVE HAD IT IN THE SHOP AND WAS TOLD THEY COULD NOT FIND ANY PROBLEM. I HAVE IT BACK IN THE SHOP AT A DIFFERENT DEALERSHIP AND HAVE STARTED A TICKET WITH CHRYSLER. SO FAR THEY HAVE DONE NOTHING.

TL* THE CONTACT OWNS A 2018 RAM 3500. THE CONTACT RECEIVED NOTIFICATION OF NHTSA CAMPAIGN NUMBERS: 19V818000 (ENGINE AND ENGINE COOLING, EQUIPMENT) AND 20V036000 (POWER TRAIN). THE CONTACT CALLED THE (HAYES CHRYSLER DODGE JEEP RAM LAWRENCEVILLE DEALER, LOCATED AT,719 DULUTH HWY, LAWRENCEVILLE, GA 30046) AND IT WAS CONFIRMED THAT THE PARTS WERE NOT AVAILABLE. THE MANUFACTURER WAS MADE AWARE OF THE ISSUE. THE CONTACT HAD NOT EXPERIENCED A FAILURE. VIN TOOL CONFIRMS PARTS NOT AVAILABLE.

WELDED DRAGLINK RENDERING THE FRONT SUSPENSION NOT ABLE TO BE ALIGNED. THIS WAS THE APPROVED RECALL PROCESS FROM FCA. THIS IS NOT AN ACCEPTABLE RESPONSE TO THE ISSUE, JUST A BANDAID TO THE UNDERLYING ISSUE. THE RECALL WAS APPROVED BY FCA AND NHTSA. APPROVED REPAIRS WERE PERFORMED BY CHRYSLER DODGE JEEP RAM CRESTVIEW, CRESTVIEW, FL. 32536. REPAIR ORDER 381821-OPEN ON 04/26/2019.