2005 TOYOTA SEQUOIA Complaints

Starter replacement is exceptionally high, self repair impossible. There should be recall on manufacturing design of starter placement inside intake manifold amongst other impossible expectations

We have an issue with our Cosco Mightyfit LX Convertible Car Seat that we purchased in 2021 from Walmart. About 5 times now, when we have gone to get our child out of the seat, one of the straps has disconnected by itself from the rear buckle loop holder. The first time it happened we thought it may be a fluke, but given it has happened now about 5 times we are concerned about the continued use of this car seat and the safety it would provide in the case of a crash. We are concerned that if involved in a crash, one side (or both) of the chest straps would somehow come undone and our child would not be secured in his seat. Once we re-connect the strap to the buckle/loop on the back side of the car seat, it seems to be okay again for a little bit, but there is no notice or appearance of issues until some time later we go to unbuckle him and realize one strap just pulls out of the back of the seat. Additionally, the issue seems to occur regardless of installation method. It has occurred with both the latch system and the vehicle's seat belt. Issue seems to be regardless of seat installation location as we have had it happen in both the 2nd and 3rd rows. Vehicle seems to not play a factor as well. To answer the suggested questions very specifically: -What component or system failed or malfunctioned, and is it available for inspection upon request? The harness. Specifically, part of the 5-point harness that is the shoulder strap (left side usually) -How was the child’s safety put at risk? Child would not be secure in instance of crash and liable to come out of their car seat or not remain as firmly planted as designed. -Has the car seat been inspected by the manufacturer, police, insurance representatives or others? No it has not. The date listed below of when incident occurred is the most recent date this occurred, but again it has been multiple times now.

After several years of fighting problems with, after braking to a brief stop, the loss of power/abs grinding when accelerating and turning right, now the ABS is completely dysfunctional. Both TRC lights will turn on and usually the parking brake, and when braking at speeds less than 10mph the abs will activate and prevent bring the truck to a stop without pumping them, on dry pavement. When the ABS light turns on, then braking is possible, but all pressure is gone from brake booster and brakes sound like they're grinding, not like the sound of abs engaging. Very dangerous to drive in snow as front brakes work but drive axle doesn't disengage when the brake pedal is depressed. Regular mechanic won't engage with diagnosing issues as he feels the problem is partly computer malfunction and Toyota won't allow for used part mismatching. ABS/ECU is failed.

The contact owned a 2005 Toyota Sequoia. The contact stated that the vehicle had been taken to the dealer on August 7th, 2023, where a protective chemical coating was sprayed on the sub frame. The contact stated that after driving, he noticed that power steering fluid was leaking from the vehicle. There were no warning lights illuminated. The contact’s brother who is an independent mechanic, informed him about the source of the leak and noticed there was rust on the puncher frame. The vehicle was towed to the same local dealer, where it was placed on the lift, and it was diagnosed that the frame had rusted and was damaged beyond repair. The mechanic was able to peel and remove rust while using a screwdriver. The manufacturer was not contacted. The failure mileage was approximately 198,000.

Took the suv for an oil change and was brought to my attention that the frame of suv, chassis, is rusted and can break any moment. I took it to Toyota 2 years ago for the recall, and they said it was fine.

The contact owns a 2005 Toyota Sequoia. The contact stated while driving 60 MPH the rear of the vehicle lowered and the rear of the vehicle started to bounce, and the suspension warning light illuminated. The vehicle was taken to the dealer and the dealer stated that the suspension system needed to be replaced. The vehicle was not repaired. The manufacturer was not contacted. The failure mileage was 100,000. The VIN was not available.

2005 Sequoia class action, court ordered frame inspection & either repair or frame replacement. Never received notice of class action. Received letter stating vehicle needed to be inspected. Took to Victory Toyota, Canton, MI on Jan 5, 2018. Was told passed inspection & frame needed seal coating, did not have product. Vehicle was taken in multiple times, never completed the process. On May 6, 2019 the vehicle was taken to this dealership, a rental vehicle was provided and they did nothing and on May 21, 2019, noted the vehicle didn’t pass inspection & the campaign had expired! Per service history report from another dealership, on May 21, (the 15th day they had they had vehicle in their possession), they noted the frame did not pass inspection, also noted the repair timeline expired and they did nothing; however, they were paid to do the job they never did. The frame should of been replaced. I have photos from 2016 showing holes in the frame. I took vehicle to two other dealerships, one inspected in fall 2019 & sent 3 photos to Toyota showing the frame rusted holes but stated once Toyota makes a decision, the never change their mind. Second local dealership printed detailed Toyota repair history report showing Victory stated the vehicle did not pass inspection and that the timeline expired on the 16th day they had the vehicle!! The vehicle interior & exterior is in excellent condition but Toyota knowing refused to replace many of the frames, even though they knew the manufacturer had not made the frames correctly. Toyota has tons of money, clearly they don’t care about their product or customers safety.

Frame deterioration has rendered the rear torque arm incapable resulting in dynamic misalignment of the rear axle. Under acceleration the vehicle veers into oncoming traffic and under deceleration it veers towards the road ditch as the axle shifts about beneath the vehicle.

I tried to make apointments to local dealers they set up appointments and than don’t do nothing about it they said the don’t have any certified tech to do the job so I left with this mess not knowing when my ride is going to give. Out on me I got about 319000 miles Toyota should be proud and thank me for keeping my ride up to date I do my part to have it running good but they not doing there part to help me with these recalls please help me out.

Malfunction indicator lights - Check engine, VSC off and TRAC off. The vehicle goes into limp mode. The issue is both a mechanical and engineering defect causing the override of the entire AIP system. Parts affected are Air injection pumps, Air switching valves, Air pump inlets/covers, Gaskets/connectors/clamps and Speed sensors.