2019 CHRYSLER PACIFICA Complaints

A misfire code came up. Had plugs done.. didn’t solve problem now blowing white smoke burning antifreeze. Head gaskets bad. We just bought this 2019 7 months ago. And it only had 68,000 miles on it now 71000 miles on it. We thought we would get the newer better vehicle and having engine problem in a car that we paid 22000 dollars for. Going to be an expensive fix on a problem that shouldn’t be occurring on a car with that mileage.

Powertrain: harsh, jerky shifting, violent, lurching gear changes, pause before engaging and high revving and lack of acceleration, mostly noticed at 50-60mph Steering PE25009 - catching or sticking when making minor or gradual turns in either direction when the steering wheel is positioned near the 11 o'clock or 1 o'clock positions. It requires extra force to break free and jerks the steering

When driving around curves the electric steering is malfunctioning. Making it unsafe to drive almost like it is sticking then when you correct it, it frees up and over corrects. This has been going on for some time now and keeps getting worse and worse. After a little research it seems a lot of other people are having this problem

The entire electrical system is messed up. There will be times it works fine but all of a sudden while driving the odometer will switch between mph and kilometers, it'll change the screen, heated seats/steering wheel will turn on or off, it'll change the air system, the stop/start frequently goes out, we've had to replace both batteries and within a few months are having to replace both again. The transmission has a lot of issues as well and it's not safe while driving it'll "jump" or stall while shifting gears.

2019 Chrysler Pacifica. The vehicle has ongoing steering, electrical, and power steering/EPS failures. The steering wheel intermittently jerks/pulls while driving, the vehicle has experienced random loss of steering assist, and the electrical system cuts out or malfunctions during normal use. The steering wheel lights and backup camera guidelines also disappear during driving sessions and only return after fully restarting the vehicle. The exact root cause is UNKNOWN, but the affected systems appear to include the EPS/power steering system, steering/suspension components, battery/electrical system, and possibly related control modules. My safety and others’ safety were put at risk because the vehicle has lost steering assist and had electrical failure while being driven, including a prior failure in an intersection. When the steering assist drops or the wheel jerks, the vehicle becomes difficult to control. This is especially dangerous because I transport my family in this vehicle. The issue has been reported repeatedly since purchase. The vehicle was inspected/repaired through Carvana/SilverRock’s repair process at Brockman Automotive, including rack and pinion/steering-related work. After that repair, the vehicle continued to drift and handle improperly. A later independent inspection at Davidson Automotive identified a loose/not properly secured tie rod, alignment problems, and a failed auxiliary battery. The shop could not complete deeper diagnostics until those prerequisite issues were corrected. The vehicle has also suffered abnormal front tire wear after the steering/alignment problems. Warning/symptoms before or during failures include steering wheel jerking/pulling, clunking/clanking/grinding/groaning noises, vehicle drift, service start/stop warning, electrical malfunctions, intermittent steering wheel control/light issues, loss of backup camera guidelines, and loss of steering assist. The vehicle/component is available for inspection upon request.

The contact owns a 2019 Chrysler Pacifica. The contact stated while the vehicle was parked in a parking lot, the contact noticed that the lower passenger's side of the windshield, underneath the windshield wiper had cracked without impact. The insurance company was contacted and informed the contact that the repair would not be covered because the failure was a known factory defect. The dealer and the manufacturer were not yet contacted. The vehicle was not diagnosed or repaired. The failure mileage was approximately 186,000.

2019 Chrysler Pacifica Hybrid experienced a serious charging system failure during routine overnight charging using a standard Level 2 home charger that had previously worked without issue. In the morning, the charging connector was physically trapped in the vehicle charge port and could not be removed despite repeated normal troubleshooting attempts, including repeated unlock cycles, charger power cycling, breaker reset, and reseating attempts. Because the Pacifica Hybrid disables operation while a charging connector is detected, the vehicle became completely undrivable and required towing. Multiple AAA tow operators were unable to move the vehicle normally. We ultimately had to personally research and guide the tow operators through the manual neutral override procedure in order to get the vehicle into neutral and onto the tow truck. The dealership has suggested that the connector may have fused or arced together during charging and is attempting to characterize the situation as “not the vehicle’s fault.” Regardless of the precise electrical mechanism, this event occurred during ordinary intended use of the vehicle’s charging system. The end result was that the vehicle trapped the connector, immobilized itself, and stranded the owner without any meaningful owner-accessible recovery method. This is not ordinary wear and tear or a cosmetic inconvenience. This was a charging-system immobilization event involving a vehicle platform that already has a documented history of charging-system recalls and software-related charging concerns. The vehicle was being used exactly as intended. No misuse, modification, or improper operation occurred. A vehicle shouldn't become completely inoperable during routine charging. I am requesting review of this matter as a significant charging-system failure and requesting goodwill assistance regarding the substantial diagnostic and repair costs now being imposed on the customer for an event that occurred during normal operation.

The contact owns a 2019 Chrysler Pacifica. The contact stated while driving at an undisclosed speed, the brake pedal was depressed, however the vehicle failed to stop as intended. The contact noticed an unusual hissing sound. The contact stated that the brake pedal was depressed to the floor. In addition, the contact stated that after the vehicle came to a complete stop, the vehicle rolled forward. The vehicle was taken to an independent mechanic where it was diagnosed with a failed vacuum pump and a failed brake booster. The contact was informed that the vacuum pump and the brake booster needed to be replaced. The vehicle was repaired. The failure reoccurred. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The vehicle was scheduled for diagnostic testing within the next couple of days. The contact stated that the failure was persistent. In addition, the contact stated that the failure was a known failure of the vehicle. The manufacturer was made aware of the failure. The contact was informed that the failure was not covered under any unknown recall or warranty program. The failure mileage was approximately 58,000.

The steering is tight/sticking when I back out of my driveway or drive slowly around turns. It does seem stiff on highway speeds as well. Also my auto stop start check light is on about 2 months after replacing both batteries and I did have the recall somewhat associated with this completed

There was a clicking noise coming from under the dash. This flapping may have been going on for years. I only took in the car after a passenger noted that this noise was something abnormal. Others have noted that this will drain the secondary battery and I have had to have that battery replaced. The dealership said it would be five hundred dollars to replace the recirc door actuator (98258 B105D). They charged me $99.95 in labor to diagnose it. I bought a replacement part myself and replaced it myself. I disassembled what was supposed to be the faulty part, but found all gears perfectly fine. I noticed there were no issues related to the recirc door itself. The replacement part worked fine until the next day, when I pushed the passenger door lock button and the flapping noise resumed. I ran the old recirc motor disconnected from the recirc door and noticed that it exhibited a flapping behavior independent of whether or not it was actually attached to the door. This indicates a programming issue, not a physical issue.