2019 CHRYSLER PACIFICA Complaints

When in gentle right turns, the steering "sticks" at about 1:00 and I have to apply force to remove the steering wheel from that position. It results in oversteering, particularly at higher speeds.

On 7/16/26 vehicle would not start; high-pitched noise heard near engine during no-start diagnosis. Towed to Goldy Chrysler Dodge Jeep Ram, Huntington WV. Per dealer invoice #27136: blown 500-amp main battery fuse found; after jumping past fuse, white smoke from exhaust and no coolant in system, diagnosed as blown head gasket. Repair: both-side head gasket replacement plus fuse assembly. Vehicle in shop 7+ weeks, returned 9/4/26 with new unresolved issue: strong smell of burned electronics and antifreeze in cabin. All failed components available for inspection upon request. Safety risk: head gasket failure/coolant intrusion caused engine hydrolock, a sudden uncommanded loss of engine power that can occur without warning, including while driving in traffic. Burned-electronics smell raises electrical/fire risk; antifreeze odor raises cabin fume exposure and window-fogging visibility concerns. Confirmed by dealer: Yes. Goldy diagnosed and documented the fuse failure, coolant loss, and head gasket failure in writing, and performed the repair. Manufacturer/police/insurance inspection: Not by police or insurance. Spoke by phone with a Chrysler HQ rep 5 times (8/13-9/1/26) who was informed; no confirmed independent physical inspection by manufacturer beyond dealer's own diagnosis. Warning signs: P0304 misfire on cylinder 3 appeared first, progressing to complete no-start with high-pitched noise, prompting the tow-in and hydrolock diagnosis.

The van has a consistent steering catch when traveling most pronounced at 11 and 1. The steering hangs and then releases which causes the van to travel unexpectedly into the other lane of traffic. There are no faults or other indicators visible with the vehicle to warn the driver of an issue. The issue is more noticeable when the outside air temperature is above 85 deg F and the van has been drive 15 or so miles. Additionally, a visual inspection of all mechanical components of the van related to steering does not show any abnormal wear and tear. The van has 126K miles on it.

The steering sticks normally when slightly turned especially going highway speeds around bends. You have to “yank” the wheel from it being stuck and risk over steering off the road or into other lane. Huge safety risk.

Almost got in 2 separate accidents because of a failed brake booster. No symptoms before hand to let me know anything was wrong. Came to a red light and the brakes became very hard to push and the vehicle proceeded to continue moving even though I hit the brake. It came to a stop in the middle of the intersection and I almost got hit. Also almost rear-ended someone because of the same issue. It has been confirmed at the Chrysler dealer that the brake booster failed. I have children and almost got into an accident twice because of it. Now I have to pay out of pocket because it got denied due to it being over the date of expiration. My vehicle has under 85,000 miles and now I'm out $700 because it won't get covered. It's a safety risk for me and my family.

Power steering sticks at highway speed around curves. This problem is worsening and is dangerous. The car has been inspected with repair estimates around $5,000.

My 2019 Chrysler Pacifica Touring L Plus is experiencing coolant leaking into a cylinder, diagnosed by. This has rendered the vehicle undrivable. The Pentastar 3.6L V6 engine used in this vehicle has a well-documented pattern of coolant intrusion into cylinders due to head gasket failure across the 2017–2019 Chrysler Pacifica model years, based on extensive owner complaints already on file with NHTSA and reported by consumer advocacy organizations. Despite this known pattern, no recall currently exists covering this specific defect for 2019 model year vehicles. This is a safety concern because coolant intrusion into a cylinder can cause sudden misfires, rough running, loss of power, and potential stalling while driving — creating a hazard in traffic, particularly at highway speeds or during turns/merges. I contacted Chrysler Case Management regarding this issue. The manufacturer has attempted to attribute responsibility to the dealership rather than acknowledging this as a manufacturer defect in the engine design/manufacturing, despite the well-documented pattern across multiple model years of the same engine. I have also not been provided a rental vehicle despite my vehicle being undrivable.

The car rapidly came to a stop as I was starting to press the brake lightly. The check engine light came on, the car made a grinding noise, and the screen said it was turning off cruise control when it had not been engaged.

I am experiencing an intermittent steering problem with my 2019 Chrysler Pacifica Limited. While driving, particularly when making slight turns or small steering corrections, the steering wheel sometimes feels as though it sticks or binds in the turned position instead of smoothly returning toward center. When this occurs, I have to apply additional force to the steering wheel to correct the vehicle’s direction. Once enough force is applied, the steering releases and moves, which can cause the vehicle to correct more abruptly than intended. This occurs at both lower and higher driving speeds and is especially noticeable during gradual turns and small steering corrections near the center position. The problem creates a safety concern because the vehicle can continue traveling in the direction of the slight turn until I deliberately apply additional steering force. This makes maintaining the intended direction of travel less predictable. There are currently no power-steering or other steering-related warning lights displayed on the dashboard. When the vehicle is stationary with the engine running, the steering wheel turns smoothly and I have not been able to reproduce the sticking sensation. The problem occurs while the vehicle is being driven. I took the vehicle to an authorized Chrysler dealership and reported the steering concern. The dealership test-drove the vehicle but stated that they could not reproduce the problem and considered the steering behavior normal. However, the problem continues to occur during normal driving. I have also been able to record video demonstrating the steering behavior. The vehicle remains available for further inspection. The exact component causing the problem is UNKNOWN. I am reporting the issue because the intermittent resistance in the steering and the additional force required to correct the vehicle’s direction could create a loss-of-control risk if the condition worsens or occurs unexpectedly during a turn.

The brake booster has failed, a hissing noise is audible coming from the brake pedal when depressed. I have also noticed reducing stopping power in certain situations. It appears this issues is referenced by Chrysler in an extended warranty, covered under Mopar Warranty Bulletin D-22-15, however this car has now been in service for 6 years.