2019 CHRYSLER PACIFICA Complaints

Component failute: first the cruse control would stop working while driving. then the engine would rive way up while trying to accelerate and not gain much speed, gas mpg dropped. when breaking to stop i had to push the break pedal harder. when the cruse had stopped and i shut the engine off, it was hard to start, and would bump and shake as if it was hitting on 2 cylinders, cruse still would not work. after i made it home, the next time i started it, it was ok, then the last time i parked it the brake will not depress and it will not start. battery has 12 volts, jumped it anyway break still want depress. took battery cables off shorted them together , did not help. break pedal still will not depress.

While driving down the 70 mph interstate my steering went out and I had 5 people in my van. There was no warning or other symptoms of the problem prior to the failure. My sister [XXX] and my mother who is [XXX] was stranded on the interstate with traffic speeding by at a high rate of speed. We had the vehicle towed to the dealership and they reported the power steering rack failed and it will cost over $5,000 to repair. I purchased this vehicle brand new in 2019. The mechanic I have repairing this vehicle reports this is a manufacturing issue. This is a dangerous issues and this vehicle should be recalled. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

The contact owns a 2019 Chrysler Pacifica. The contact stated that the message “Engine would Shutoff Soon” was displayed. The START/STOP, engine, Forward Collision Avoidance, and 4WD warning lights were illuminated. The contact stated that the power steering functionality had become inoperable. The vehicle had stalled on several occasions. The contact related the failure to NHTSA Campaign Number: 19V348000 (Electrical System). The contact called the local dealer, but the vehicle was not diagnosed or repaired. The vehicle was taken to an independent mechanic who scanned the vehicle and determined there was a code that “Voltage-too-High” was displayed. The manufacturer was not notified of the failure. The failure mileage was approximately 129,000.

The steering on this vehicle has a catching sensation, especially when changing lanes at high speeds, or travelling down a curvy mountain highway. The steering seems to require extra effort to get back to a center position. The problem is most noticeable when making slight turns (such as changing lanes) at higher speeds.

The contact owns a 2019 Chrysler Pacifica. The contact stated that while driving at various speeds, after making a slight adjustment of the steering wheel to the right, while returning to center, the steering wheel was sticking and required extra force to return the steering wheel to center. The contact stated that the failure was intermittent. There was no warning light illuminated. The vehicle was taken to the dealer; however, the dealer was unable to duplicate the failure. The contact stated that the failure reoccurred, and the vehicle was taken to another dealer, but was not yet diagnosed or repaired. The contact researched online and related the failure to NHTSA Campaign Number: 19V348000 (Electrical System); however, the VIN was not included in the recall. The manufacturer was informed of the failure and referred the contact to the NHTSA Hotline for assistance. The failure mileage was approximately 200,000.

I am having an issue with the monitor in vehicle. For several months now have and issue with the backup camera some times working and sometimes it doesn't. It will sometimes be gray or black but will show the lane lines but no outside picture. It will also sometimes show the backup camera but it will be froze and does not move with the vehicle. Saturday had and issue where the monitor was ghost touching the buttons on the screen; it was turning the channel and also changing the air conditioner. I had to cut the radio and monitor off so the air would work properly. was reading online where some people were having this same issue and was saying it was being recalled for software issues, but with my vin number shows no recalls at all. just wondering if this is a issue that should be recalled on these vehicles or if there is another reason for it. If it happens again I will surely get pictures or video evidence since there is an option on here for it.

When driving in longer, gradual curves - the steering wheel "sticks". You can feel it isnt responsive, and you have to apply more pressure than you should to get it out of the "stuck" spot. Which makes the car over correct at times. It has happened dozens of times by now - so wasnt a one time thing. Most recent was a last night.

The steering wheel gets sticky when making turns and sometimes seems to be stuck when turning the wheel from a turn.

when driving into a left curve the chrysler pacifica minivan at roughly 10:00 on the steering wheel, the steering wheel locks and is very hard to get out of the locked state. in order to clear the locked state I have to jerk the wheel hard back to the right to get it free. I feel that it will eventually either stay locked in that position and cause a head on collision or if overcorrected will cause the vehicle to swerve to the right and cause a crash. I feel this is a very unsafe situation and have talked to many people with this problem and they have also said the same thing. Also i have read several forums on the internet about others across the country having the same issue. secondly the backup camera has started to not work recently. it started around the same time that the locked steering situation occurred. also some of the buttons on the steering wheel are not functioning properly. volume up when pressed causes the volume to go down and vice versa. i believe that there is an electrical issue in this vehicle and it is affecting the steering along with other items. please initiate the recall for the steering because i do not feel safe with this happening and especially if it is raining. thank you

The transmission is starting to jerk and make hard abrupt transitions from gears