GMC Complaints
View complaints related to GMC. The complaints found here are submitted by actual consumers with first hand experience. You can submit your own complaint to the NHTSA or call the Hotline, Monday-Friday 8am to 8pm at (888) 327-4236, TTY: (800) 424-9153.
-
2020 GMC TERRAIN- Enville, TN
The contact owns a 2020 GMC Terrain. While the contact’s wife was driving approximately 40 MPH and attempting to depress the brake pedal to pull into the parking lot of Walmart, the braking distance was extended while bringing the vehicle to a complete stop. The driver used excessive force on the brake pedal using both feet. The vehicle was towed to a certified mechanic, who diagnosed the vehicle and determined that the brake vacuum pump had failed. The vacuum pump had fractured where it was connected to the camshaft, causing pieces to enter the engine. The brake vacuum pump and the connector were replaced. The manufacturer was made aware of the failure. The failure mileage was approximately 156,000.
Source: HOTLINE VEHICLE OWNERS QUESTIONNAIRE -
2025 GMC SIERRA 1500- Flint, MI
If truck has a “dusting of snow” on it, blower motor for defrost and heat retracts to absolute “low” setting to supposedly protect the blower motor. Have been caught driving in snow, and defrost couldn’t keep up with keeping windshield defrosted due to this behavior. Had to pull over on expressway to clean vents on the cowl from snow in order for the defrost to work properly. According to GM, this is normal behavior. In fact this is extremely dangerous and should be investigated and a recall to repair should be made. Having to pull over to remove snow from the cowl, open the hood to clear the other vents is not safe.
Source: NHTSA WEB SITE -
2020 GMC YUKON XL- La Grange, KY
Knocking noise from engine-no check engine light initially. Next time it was started knocking was still present and the check engine light was on. Contacted Champion Chevrolet in LaGrange KY. Dealership diagnosed problem (Code P0308 - Cylinder 8 misfire). Compression test on Cylinder 8 failed. Removed valve cover and confirmed loud tick in the rocker shaft and worn camshaft lobes. Was told I would need a new engine and that repairing the existing engine was not cost effective. So, $22,722.14 later, i have a new engine in my 2020 GMC Yukon and have the original engine (core charge) in my shop in case it is needed for evaluation to help determine if the GM recall should be expanded to 2020 model year (and others not covered by the current recall).
Source: NHTSA WEB SITE -
2021 GMC ACADIA- Vandalia, MI
My car suddenly out of the blue started overheating. By the time I could get stopped safely and turn the car off the engine fan kept running to try to cool it down. I’ve never had any issues with my car. It only has 47,000 miles on it. I now have to have it towed to a mechanic shop to get diagnosed, but I’m hearing that it’s probably a thermostat and that the GMC Acadia’s are famous for that being a problem. I’m not sure why GMC would not do a recall on this part! this is an extremely expensive fix.
Source: NHTSA WEB SITE -
2024 GMC SIERRA 1500- JOHNSBURG, IL
Break system failed while driving. Multiple warning lights came on including Break System Failire, Service Steering Column Lock, Service Traction Control, Service ESC and Service Brake Pad Monitor. This happened as I was driving and I could barely stop the truck. I had my wife and kids in the car. Luckily, I was not driving very fast and was not in a congested or had to stop quickly. If I had to stop fast or was in a congested area this could have causes a life threatening accident.
Source: NHTSA WEB SITE -
-
2021 GMC YUKON- Hampton, NH
On Christmas Day while driving on the highway, I noticed a ticking sound coming from the engine. Our 21 Yukon Denali just hit 85,000 miles. I first noticed the traction control light was became disabled and then the check engine light started flashing. The sound escalates when you step on the gas. It appears that the lifters and cams are damaged on the vehicle and had to be towed to a dealership were it currently waits to avoid further damage. I was advised by the dealership that this particular vehicle is not part of the engine, recall notice, but heard that they might be expanding vin numbers to the recall as more incidents occur. They did confirm that the lifters and Cam’s are the issue.The vehicle has had a great maintenance record and was just at the same dealership five weeks earlier for oil change.
Source: NHTSA WEB SITE -
2021 GMC SIERRA 1500- Templeton , CA
2021 gmc purchased brand new Truck had complete engine failure lifters and rods were replaced at 7000 miles under factory warranty lost complete engine power GMC says we are not on any recall and they refused to buy back the truck or give me an extended warranty they said this year 2021 with 5.3 doesn’t have engine issues.
Source: NHTSA WEB SITE -
2021 GMC SIERRA 1500- Dundee, MI
Motor was chugging took to a dealership on march 22 was told I had a collapsed lifter I was told my cost would be 4800 gm would cover half which was fine then when the work was done the dealership took it for a test drive while they were on the test drive the motor locked up they originally told me it was a cam bearing later I found out through paperwork that was emailed to me that it was a main bearing which is consistent with the recall but my vin number hasn’t came up it’s a 2021 gmc sierra 1500 with a l87 6.2 and it cost me 6200 I was 10,000 miles out of warranty
Source: NHTSA WEB SITE -
2021 GMC SIERRA 1500- Arden, NC
I own a 2021 GMC Sierra 1500 equipped with the 6.2L L87 V8 engine and 10-speed transmission. The vehicle exhibits the following issues: Persistent lifter ticking noise audible from the driver-side wheel well, even when the engine is warm. Rough idle that is noticeable at stops and low-speed conditions. Transmission shifting problems, specifically harsh or delayed shifts when downshifting from 3rd to 2nd gear during deceleration. These symptoms raise concerns about potential lifter failure and transmission defects. I am aware of GM’s recall (25V-274) and NHTSA Engineering Analysis EA25007, but my vehicle’s build date (January 2021) currently falls outside the official recall window. Given the similarity of symptoms to those under investigation, I believe my vehicle may be affected by the same defect. Safety Concern: The rough idle and shifting hesitation could lead to unexpected loss of power or unsafe driving conditions, especially during deceleration or merging. Request: Please include this complaint in EA25007 and consider expanding the recall to cover earlier builds. I am willing to provide service records, videos, and additional documentation upon request.
Source: NHTSA WEB SITE -
2023 GMC SIERRA 1500- Bothell, WA
Driving on highway at 60mph while towing a travel trailer and the rear tires briefly locked up, the check engine light came on with an explanation mark (!) and the dash displaying a major warning. The truck went into "limp mode." Computer code read P0747. Dealer confirmed issue and replaced valve body. Truck had 22,000 miles. Appears 2023 vehicles should be added to the original recall for long-term warranty protection.
Source: NHTSA WEB SITE