MAZDA Complaints

Power steering became stiff hard to turn, steering pulls left or right when driving over bumps on the road also brakes became spongy.

What component or system failed or malfunctioned, and is it available for inspection upon request? The daytime running light (DRL) failed and stopped working. It is available for inspection upon request. How was your safety or the safety of others put at risk? Other cars won't be able to see my car during the daytime. Has the problem been reproduced or confirmed by a dealer or independent service center? There is a Mazda reference number for the recall is 4320A. There is also a NHTSA campaign number 20V063. NHTSA 20V063: [XXX] Mazda 4320A: [XXX] Has the vehicle or component been inspected by the manufacturer, police, insurance representatives or others? No, we can see the daytime running lights not working Were there any warning lamps, messages or other symptoms of the problem prior to the failure, and when did they first appear? No, there were no warnings, messages, or other symptoms prior to the failure. It happened a few weeks ago. I have called Mazda and they tell me it is not part of recall. My VIN number is in the range of the VIN numbers affected. Mazda refused to fix this recall issue because my VIN number is not associated with this recall. This is a safety issue and I want my VIN number to be added to this recall VIN list. Thank you, INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

The contact owns a 2019 Mazda CX-5. The contact stated while driving approximately 65 MPH, the air bags warning light illuminated. The vehicle was taken to a local dealer to be diagnosed; however, the contact was not provided information the diagnostic test results. The vehicle was not repaired. The contact stated that the air bags warning light was no longer illuminated. The manufacturer had been informed of the failure. The failure mileage was approximately 38,000.

I experienced coolant leaking from the cylinder head. Mazda is quoting me over $7700 for the repairs. There was a TSB released, there had been numerous revised versions re: the same issue, in Feb 2023 finally including my vehicle. Mazda knowingly put me and my family’s safety in jeopardy by not including me sooner, and now have left me with an astronomical repair bill for an issue they’ve known has existed for years. Had they alerted me when the originally discovered the issue, the vehicle would’ve been under warranty and they would’ve had to replace the parts under warranty.

On April 15th, 2019, Mazda made the public aware of Recall Campaign 3219D which involves a failure of the Front Body Control Module on Mazda 3 vehicles, which renders the front windshield wipers inoperable. That document indicates that the part number of replacement for the faulty module is KDY5-67-5XX. On July 10th, 2023, a Mazda dealership serviced a 2017 Mazda CX-5 as the windshield wipers were not functioning. They determined that the Front Body Control Module was faulty and causing the issue. With the new module, part number BAYS-67-5XX, the issue is resolved. The above part numbers are remarkably similar, especially given the added factor that the Front Body Control Module of this vehicle failed in the exact same way as is described in the recall. Mazda, in their filing of the Part 573 Safety Recall Report for campaign 3219D for the Mazda 3, indicated that there may still be an issue with the wiper motor's "condenser" (sic, capacitor) being undersized. Mazda refused to reimburse for these repairs when detailed and requested in writing.

The contact owns a 2010 Mazda Mazda6. The contact stated that while driving at an undisclosed speed, the rear frame detached from the vehicle. The contact stated that the vehicle was previously repaired under NHTSA Campaign Number: 18V631000 (Suspension, Structure) and the contact related the failure to the recall. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The manufacturer was not made aware of the failure. The failure mileage was approximately 160,000.

Some vehicles may have coolant leaks at the cylinder head around the exhaust manifold. There may be cracks at the stud bolt hole or at the outside of the exhaust manifold - from Mazda's TSB. Excessive coolant leak leading to engine-overheating and going into 'limp mode' couldn't drive faster than around 30 mph. Mazda has repeatedly declined help with goodwill requests and any further assistance. ref. https: [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

The rear frame completely corroded. I was on my way to work this morning and the frame broke due to corrosion. I almost lost my life this morning. According to the recall only the front end was considered faulty. I took the vehicle in for the recall and only the front was looked at and replaced.

There has been no accident- the vehicle is my mother in laws vehicle- my concern is while at work she has at times loaded our daughter into the vehicle- I inspected the vehicle one day while as an employee of Les Schwab- the driver cvc axle vibrates so bad from the boot being torn and having no lubrication- these axles power the vehicle forward and if not maintained can snap and cause damage- the wipers no longer work correctly- the tires are 2017 and old and weather cracked- potential to separate while driving or blow out on the heated pavement. upon inspection also found that the front shocks are blown out and bouncing in the mounts under the hood- causing the tires to not have the correct contact patch on the road thus decreasing traction and control- on top of all this the vehicle hasn't been registered since 2020 and has no insurance on the vehicle- again there has been no accident...yet- this is my concern- that if this vehicle continues to remain operational and on the road it not only puts the driver and occupants at risk but also other drivers- kids- teens and anyone that may be on the other end o the crash when the vehicle does snap the cvc axle or blow i out a tire

Brakes stopped working while we were on vacation. Made the drive down fine, but the next day went to drive the car, pressed the brakes and the car did not come to a complete stop. Also made a funny noise when we tried to press on the brakes. My husband practically had to stand up and push all the way down to get car to stop. Luckily we were not in a congested or confined place. Ended up replacing the brake booster. Three weeks later my acceleration stopped working intermittently. I go to press the gas and the car doesn’t go. The dealership is saying it’s the brake signal.